Abstract:The harsh operating environment of automotive and aerospace applications causes printed circuit board (PCB) connectors to be susceptible to intermittent high contact resistance, which eventually leads to a failure resulting in the loss of signal integrity. Pin fretting within the mating connector is often the cause of these failures. Over the past several years, there has been a significant increase in the laboratory-based testing of sample connectors for pin fretting. These laboratory-based results have shown the primary cause of pin fretting to be due to the relative motion within the mating connector. However, quantification of the relative motion in different vibration environments by considering the dynamics of PCBs has not been studied yet. This paper develops a new methodology for studying pin fretting within the mating connector. The developed methodology is based on the quantification of relative motion as a measure of pin fretting by considering the dynamics of PCBs, printed circuit board assemblies (PCBAs), and mounting brackets. To do this, a continuous, lightly damped, multi-degree of freedom (MDOF) model is developed for the assembly consisting of PCBs, PCBAs, and mounting brackets. The behavior of the system is investigated by exciting the system using harmonic and random vibration signals. In the harmonic signal analysis, a frequency domain-based approach is presented to compute the relative motion of the mating connector, while a pseudo-random time series signal derived from the power spectrum density (PSD) of the signal is used to excite the system for the random vibration excitation analysis. The relative response vector is then computed based on the system's response. The results of the relative motion of the mating connectors are presented in terms of the maximum amplitude of relative motion and the cumulative relative movement. The significance of the cumulative relative movement is that the complex phenomenon of pin fretting in the mating connectors can be represented by a simple time series model that can be used to correlate the material degradation. Finally, two numerical examples using the analytical and finite element-based (FE) technique are shown to demonstrate the proposed methodology. The examples show that the method proposed here is systematic and constructive in quantifying the pin fretting behavior.

Ergonomic analysis of fastening vibration based on ISO Standard 5349 (2001)

Study of the effect of hand-arm vibration on hand grip strength

Isolating In-Situ Grip and Push Force Distribution from Hand-Handle Contact Pressure with an Industrial Electric Nutrunner

Assessment of ergonomically designed handle shapes for low-frequency vibration responses

A Data Analytic End-to-end Framework for the Automated Quantification of Ergonomic Risk Factors Across Multiple Tasks Using a Single Wearable Sensor

Hand Tool Intervention for Rubber Tappers Using Modified Michie Golledge Knife

Data-Driven Ergonomic Risk Assessment of Complex Hand-intensive Manufacturing Processes

Construction Ergonomics: Concrete Bit Wear Increases Handle Vibration and Drilling Time

Analysis of the Handle Cross-section Design of Cordless Drill Screwdriver

Vibration-induced muscle fatigue, a possible contribution to musculoskeletal injury

An Online Multi-Index Approach to Human Ergonomics Assessment in the Workplace

Ergonomic hand tool design.

Managing ergonomic risk assessment among assembly operators in the small‐scale fabrication sector

Laboratory evaluation of occupational exposure to hand-arm vibration (HAV) during grounds maintenance equipment operations

Development of an ergonomic wearable robotic device for assisting manual workers

Ergonomic Risk Identification for Spacesuit Movements Using Factorial Analysis

Ergonomic Embedded in Designing Welding Assembly Tool for Automotive Manufacturing Process

Estimating Human Wrist Stiffness during a Tooling Task

Ergonomic Risk Assessment of Aluminum Form Workers’ Musculoskeletal Disorder at Construction Workstations Using Simulation

Effects of Short-Term Hand Tractor Operation on Upper Limb Responses of Users

Influence of Printed Circuit Board Dynamics on the Fretting Wear of Electronic Connectors: A Dynamic Analysis Approach