Abstract:Structural Health Monitoring, Ahead of Print. The absolute strain, which is the total strain experienced by a structure when the loading increases from zero to the current loading level, is an important physical quantity for evaluating the integrity of a structural component. To measure the absolute strain, a strain sensor, such as a strain gauge or fiber Bragg grating, must be installed at a target structure when no loading or strain is present. Subsequently, loading is applied, and the absolute strain can be measured from the variation in the strain sensor reading. However, measuring absolute strain is difficult because the strain sensors are not installed on most in-service structures before any loading is applied or any strain occurs. In this study, a reference-free absolute strain estimation technique is developed based on the acoustoelastic effect of longitudinal waves. First, the relationship between the absolute strain and longitudinal wave velocity is explicitly derived. Subsequently, the absolute strain is estimated based on the linear relationship between the absolute strain and the velocity ratio of the longitudinal wave propagating in the loading direction to that propagating in the transverse direction. The uniqueness of the developed technique includes (1) a theoretical derivation of the linear relationship between the absolute strain and the velocity ratio of longitudinal waves propagating in parallel and perpendicular directions of uniaxial loading, (2) absolute strain estimation without any prior sensor installation or any absolute strain measurement at a known loading level, and (3) automated temperature compensation for in-service structures without any temperature measurement. The performance of the developed technique is experimentally evaluated using an aluminum plate and steel rod specimens. The evaluation results show that the developed technique estimates absolute strain within an 8.8% maximum relative error and a 6.1% normalized root-mean-square error.

An Accurate Strain Gauge Positioning Approach Based on Geometry and Color Features

Strain Measurement for Sheet Metal Forming Based on Close Range Photogrammetry

A Gaussian Multi-Scale Space Difference Method to Multiple Slight Damage Localization Based on Strain Modes

High Strain Gradient Measurements Using Modified Automated Grid Technique

Multi-axis Dynamic Displacement Measurement Based on a Strain Shunt Structure

Pseudo spackle pattern photography algorithm development and experimental calibration

Automatic Detection of the Orientation of Strain Gauges Bonded on Composite Materials with Polymer Matrix, in Order to Reduce the Measurement Errors

The Projective Space and Application for Digital Photogrammetry in Strain Testing

A New Direct Strain Measurement Using Optical Grid Method

Three-component strain gauge for precise measurement of load fluctuations

A Vision‐based Surface Displacement/strain Measurement Technique Based on Robust Edge‐enhanced Transform and Algorithms for High Spatial Resolution

A Modified Algorithm for Reducing Calculation Errors in Large Strain Measurement with Strain Gauges

Speckle technique applied to precise measurement of strain

Conformal Fabrication of Thick Film Platinum Strain Gauge Via Error Regulation Strategies for In Situ High-Temperature Strain Detection

Novel Measurement Method for Full-field Bridge Strain and Displacement with Limited Long-gauge Strain Sensors

Towards strain gauge 2.0: Substituting the electric resistance routinely deposited on polyimide film by the optimal pattern for full‐field strain measurement

Reference-free absolute strain estimation using longitudinal waves and relative strain measurements

Research on 3D-full field strain fast measurement system in the process of sheet metal forming based on photogrammetry

Distributed Strain Monitoring Using Nanocomposite Paint Sensing Meshes

Geometric Phase Analysis Method Using a Subpixel Displacement Match Algorithm

Strain measurement by contour analysis