Abstract:The checkerboard constitutes the best pattern for full‐field strain measurement because it maximizes image gradient. In the experimental mechanics community, employing this pattern is currently strongly limited because depositing it on the surface of specimens raises practical difficulties. A recent study shows, however, that it is technically possible by using a laser engraver. The present paper aims to push this solution forward by printing a checkerboard pattern on a thin polymeric film and then gluing the resulting laser‐engraved film on the specimen surface. The underlying idea is to separate the manufacturing process of this optical strain gauge on the one hand and its use on the other hand to help spread this strain measuring tool in the experimental mechanics community. The polymeric film employed here is the same as that used in the manufacturing process of classic electrical gauges, so one can rely on the know‐how of classic strain gauge bonding to glue this optical strain gauge on the specimen surface. The main difference between the proposed tool and classic electrical gauges is that the strain field beneath the polymeric support is measured instead of localized strain values. The paper is a proof of concept for this strain field measuring tool. The manufacturing and bonding processes are described in the paper. The localized spectrum analysis, a spectral technique developed for processing images of periodic patterns, is used to retrieve the strain fields from checkerboard images. Through two complementary examples, we show the ability of this new type of strain gauge to detect and quantify local details in the strain field beneath. A simplified 1D model is also proposed to assess the minimum width of the strain peak that can reliably be measured with this technique.

Towards strain gauge 2.0: Substituting the electric resistance routinely deposited on polyimide film by the optimal pattern for full‐field strain measurement

Simplified Laser-Speckle Strain Gauge

Real-Time Plasmonic Strain Sensors Based on Surface Relief Diffraction Gratings

Optical strain sensor using median density grating foil: Rivaling the electric strain gauge

Pseudo spackle pattern photography algorithm development and experimental calibration

A new method for high resolution curvature measurement applied to stress monitoring in thin films

Optical Grating Diffraction Method: from Strain Microscope to Strain Gauge

&Lt;title>diffraction Strain Sensor for Micromeasurements</title>

Three-dimensional surface strain sensor based on LIG/PDMS composite film with adjustable electromechanical performance

Lithographically Defined Zerogap Strain Sensors

Strain measurement in semiconductor FinFET devices using a novel moiré demodulation technique

Substrate-Free Transfer of Silicon- and Metallic-Based Strain Sensors on Textile and in Composite Material for Structural Health Monitoring

Piezo-tunneling strain sensors integrated on plastic by combining vacuum thin film coatings and 3D printing technologies

A Non-Intrusive Fluorescent Pattern for Internal Microscale Strain Measurements Using Digital Image Correlation

Development, Characterisation and High-Temperature Suitability of Thin-Film Strain Gauges Directly Deposited with a New Sputter Coating System

Full‐Range On‐Body Strain Sensor of Laser‐Induced Graphene Embedded in Thermoplastic Elastomer via Hot Pressing Transfer for Monitoring of the Physiological Signals

Interferometric measurement of the transverse strain response of electroactive polymers

In-situ quantification of manufacturing-induced strains in fiber metal laminates with strain gages

Fiber Bragg Gratings Sensor Strain–Optic Behavior with Different Polymeric Coatings Subjected to Transverse Strain

An Interdigital Strain Sensor Through Laser Carbonization of PI and PDMS Transfer

Polymer-based strain sensors: review