Formulae of luminosity and beam-beam tune shifts for flat-beam asymmetric colliders

Demin Zhou

DOI: https://doi.org/10.48550/arXiv.2212.12706

2022-12-24

Abstract:This note outline the formulae of luminosity and beam-beam tune shifts applicable to flat-beam asymmetric colliders. The formulae are tested with the machine parameters of SuperKEKB.

Accelerator Physics

What problem does this paper attempt to address?

Luminosity and beam-beam tune shifts with crossing angle and hourglass effects in e$^+$-e$^-$ colliders

Tanaji Sen

DOI: https://doi.org/10.48550/arXiv.2208.08615

2022-08-18

Abstract:We develop theoretical expressions for the luminosity and beam-beam tune shifts in the presence of both a crossing angle and hourglass effects for the present and next generation of symmetric e$^+$-e$^-$ colliders. The theory is applied to the design of the Fermilab site filler Higgs factory and to the FCC-ee collider.

Accelerator Physics,High Energy Physics - Experiment
Tune Shifts and Spreads Due to Short and Long Range Beam-Beam Interaction

Wang, L.F.,Zhang, C.,Wang, S.H.,Guo, Z.Y.

DOI: https://doi.org/10.1109/pac.2001.987259

2001-01-01

Abstract:The performance of existing and proposed collider is often limited by the beam-beam interaction. The tune shift and spread from head-on and long-range beam-beam interactions for both round and flat Gaussian beam have been studied with analysis method in this paper. These formulas are useful for multi-bunch colliders where both short-range and long-range beam-beam interactions should be considered.
Simulations and experimental results on beam-beam effects in SuperKEKB

Demin Zhou,Kazuhito Ohmi,Yoshihiro Funakoshi,Yukiyoshi Ohnishi,Yuan Zhang

DOI: https://doi.org/10.1103/PhysRevAccelBeams.26.071001

2023-06-05

Abstract:The beam-beam interaction is one of the most critical factors determining the luminosity performance of colliders. As a circular collider utilizing the crab-waist scheme, multiple factors, such as beam-beam, crab waist, impedances, etc., interact to determine the luminosity of SuperKEKB. The interplay of these factors makes it challenging to predict luminosity via simulations. This paper presents recent advances in understanding the luminosity performance of SuperKEKB from beam-beam simulations and experiments. The key aspects affecting the luminosity of SuperKEKB, as well as the areas where further research is needed, are highlighted.

Accelerator Physics
Analytical Estimation of the Beam-Beam Interaction Limited Dynamic Apertures and Lifetimes in e^+e^- Circular Colliders

Jie Gao

DOI: https://doi.org/10.1016/S0168-9002%2801%2900239-X

2000-12-22

Abstract:Physically speaking, the delta function like beam-beam nonlinear forces at interaction points (IPs) act as a sum of delta function nonlinear multipoles. By applying the general theory established in ref. 1, in this paper we investigate analytically the beam-beam interaction limited dynamic apertures and the corresponding beam lifetimes for both the round and the flat beams. Relations between the beam-beam limited beam lifetimes and the beam-beam tune shifts are established, which show clearly why experimentally one has always a maximum beam-beam tune shift, \xi_{y, max}, around 0.045 for e-^+e$^- circular colliders, and why one can use round beams to double this value approximately. Comparisons with some machine parameters are given. Finally, we discuss the mechanism of the luminosity reduction due to a definite collision crossing angle.

Accelerator Physics
Impact of beam–beam effects on absolute luminosity calibrations at the CERN Large Hadron Collider

A. Babaev,T. Barklow,O. Karacheban,W. Kozanecki,I. Kralik,A. Mehta,G. Pasztor,T. Pieloni,D. Stickland,C. Tambasco,R. Tomas,J. Wańczyk

DOI: https://doi.org/10.1140/epjc/s10052-023-12192-5

IF: 4.991

2024-01-10

The European Physical Journal C

Abstract:At the Large Hadron Collider (LHC), absolute luminosity calibrations obtained by the van der Meer ( vdM ) method are affected by the mutual electromagnetic interaction of the two beams. The colliding bunches experience relative orbit shifts, as well as optical distortions akin to the dynamic- effect, that both depend on the transverse beam separation and must therefore be corrected for when deriving the absolute luminosity scale. In the vdM regime, the beam–beam parameter is small enough that the orbit shift can be calculated analytically. The dynamic- corrections to the luminometer calibrations, however, had until the end of Run 2 been estimated in the linear approximation only. In this report, the influence of beam–beam effects on the vdM -based luminosity scale is quantified, together with the associated systematic uncertainties, by means of simulations that fully take into account the non-linearity of the beam–beam force, as well as the resulting non-Gaussian distortions of the transverse beam distributions. Two independent multiparticle simulations, one limited to the weak-strong approximation and one that models strong-strong effects in a self-consistent manner, are found in excellent agreement; both predict a percent-level shift of the absolute pp -luminosity values with respect to those assumed until recently in the physics publications of the LHC experiments. These results also provide guidance regarding further studies aimed at reducing the beam–beam-related systematic uncertainty on beam–beam corrections to absolute luminosity calibrations by the van der Meer method.

physics, particles & fields
Formulae for estimating average particle energy loss due to Beamstrahlung in supercolliders

Sergei Nikitin

DOI: https://doi.org/10.48550/arXiv.2002.01173

2020-02-04

Abstract:Based on simplified models, formulae for determining particle energy losses due to Beamstarhlung in supercolliders are obtained. The developed semi-analytical approach can be useful for estimating the parameters of colliding beams under various conditions without using special beam-beam simulation codes.

Accelerator Physics
Luminosity Performance Studies of Linear Colliders with Intra-train Feedback Systems

J. Resta-Lopez,P.N. Burrows,A. Latina,D. Schulte

DOI: https://doi.org/10.48550/arXiv.0902.2915

2009-02-17

Abstract:The design luminosity for the future linear colliders is very demanding and challenging. Beam-based feedback systems will be required to achieve the necessary beam-beam stability and steer the two beams into collision. In particular we have studied the luminosity performance improvement by intra-train beam-based feedback systems for position and angle corrections at the interaction point. We have set up a simulation model which introduces different machine imperfections and can be applied to both the International Linear Collider (ILC) and the Compact Linear Collider (CLIC).

Accelerator Physics
Performance and luminosity models for heavy-ion operation at the CERN Large Hadron Collider

R. Bruce,M. A. Jebramcik,J. M. Jowett,T. Mertens,M. Schaumann

DOI: https://doi.org/10.1140/epjp/s13360-021-01685-5

2021-07-01

The European Physical Journal Plus

Abstract:Abstract A good understanding of the luminosity performance in a collider, as well as reliable tools to analyse, predict, and optimise the performance, is of great importance for the successful planning and execution of future runs. In this article, we present two different models for the evolution of the beam parameters and the luminosity in heavy-ion colliders. The first, Collider Time Evolution is a particle tracking code, while the second, the Multi-Bunch Simulation is based on the numerical solution of ordinary differential equations for beam parameters. As a benchmark, we compare simulations and data for a large number of physics fills in the 2018 Pb–Pb run at the CERN Large Hadron Collider (LHC), finding excellent agreement for most parameters, both between the simulations and with the measured data. Both codes are then used independently to predict the performance in future heavy-ion operation, with both Pb–Pb and p–Pb collisions, at the LHC and its upgrade, the high-luminosity LHC. The use of two independent codes based on different principles gives increased confidence in the results.
Impact of Beam-Beam Effects on Absolute Luminosity Calibrations at the CERN Large Hadron Collider

A. Babaev,T. Barklow,O. Karacheban,W. Kozanecki,I. Kralik,A. Mehta,G. Pasztor,T. Pieloni,D. Stickland,C. Tambasco,R. Tomas,J. Wańczyk

DOI: https://doi.org/10.1140/epjc/s10052-023-12192-5

2024-04-19

Abstract:At the Large Hadron Collider (LHC), absolute luminosity calibrations obtained by the van der Meer (vdM) method are affected by the mutual electromagnetic interaction of the two beams. The colliding bunches experience relative orbit shifts, as well as optical distortions akin to the dynamic-$\beta$ effect, that both depend on the transverse beam separation and must therefore be corrected for when deriving the absolute luminosity scale. In the vdM regime, the beam-beam parameter is small enough that the orbit shift can be calculated analytically. The dynamic-$\beta$ corrections to the luminometer calibrations, however, had until the end of Run 2 been estimated in the linear approximation only. In this report, the influence of beam-beam effects on the vdM-based luminosity scale is quantified, together with the associated systematic uncertainties, by means of simulations that fully take into account the non-linearity of the beam-beam force, as well as the resulting non-Gaussian distortions of the transverse beam distributions. Two independent multiparticle simulations, one limited to the weak-strong approximation and one that models strong-strong effects in a self-consistent manner, are found in excellent agreement; both predict a percent-level shift of the absolute pp-luminosity values with respect to those assumed until recently in the physics publications of the LHC experiments. These results also provide guidance regarding further studies aimed at reducing the beam-beam-related systematic uncertainty on beam-beam corrections to absolute luminosity calibrations by the van der Meer method.

Accelerator Physics
Strong-strong beam-beam simulations with lattices of circular e+e- colliders

Zhiyuan Li,Yuan Zhang,Kazuhito Ohmi,Demin Zhou,Yiwei Wang,Gang Xu

DOI: https://doi.org/10.1016/j.nima.2024.169386

2024-04-20

Abstract:Strong-strong beam-beam simulations for circular colliders are very time-consuming. Thus far, such simulations have predominantly utilized a linear transfer matrix to represent the full nonlinear lattice. Otherwise, when nonlinear lattices were included, beam-beam interactions were usually studied by using weak-strong or quasi-strong-strong numerical models. The next-generation circular colliders, including FCC-ee at CERN, CEPC in China, and the Super Tau-Charm Factories in China and Russia, will leverage the crab waist collision scheme with a large Piwinski angle. This scheme has already been employed in the two currently operational colliders, DAFNE and SuperKEKB. Accurate predictions of the performance of such colliders call for strong-strong beam-beam simulations, taking into account the interplay of the beam-beam interaction with lattice nonlinearities, beam-coupling impedances, and other collective effects. To answer this call, a novel code APES-T that allows integrating the direct strong-strong beam-beam simulations with element-by-element nonlinear tracking has been developed. To overcome the limitations in computing time, APES-T employs parallelization techniques. Specifically, the beam-beam module is parallelized using MPI programming, while the element-by-element tracking modules are parallelized using GPU programming. In this paper, we present the development of the APES-T code, its benchmark against the SAD code, and its application to the CEPC in investigating the interplay between beam-beam interaction, beamstrahlung, and lattices.

physics, particles & fields, nuclear,nuclear science & technology,instruments & instrumentation
Calculations of space-charge tune shifts in storage rings with extremely short bunches and small bunch spacing

Zihang Zhao,Na Wang,Haisheng Xu,and Zhilong Pan

DOI: https://doi.org/10.1103/physrevaccelbeams.27.094201

2024-09-19

Physical Review Accelerators and Beams

Abstract:Space-charge tune shifts can affect the beam quality in storage rings. Laslett's method, a classical approach for calculating space-charge tune shifts, may not hold valid assumptions for rings with extremely short bunches and small bunch spacing, such as in steady-state microbunching (SSMB) storage rings. To overcome this limitation, we have developed new formulas that are suitable for arbitrary bunch lengths and spacings for calculating space-charge tune shifts. Additionally, simplified formulas have been provided for the calculations of space-charge tune shifts specifically in the context of extremely short bunch lengths. Numerical computations were carried out to demonstrate the validity of these newly derived formulas. Moreover, the formulas were applied to compute the space-charge tune shifts in an SSMB storage ring characterized by typical parameters. https://doi.org/10.1103/PhysRevAccelBeams.27.094201 Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Published by the American Physical Society

physics, particles & fields, nuclear
Relations Between the Beam Characteristics on the Target and the Parameters of Thebeam Transport System

JM Xu,GK Ji

DOI: https://doi.org/10.3321/j.issn:0254-3052.2004.05.017

2004-01-01

Abstract:In order to get a beam spot with limited dimension and symmetrical distribution on the target, the required parameters of the beam transport system are discussed. The related formulas to determine these parameters for different initial conditions are given also.
Model to study interplay between Beamstrahlung and coupling impedance in future lepton colliders

D. Leshenok,S. Nikitin,M. Zobov

DOI: https://doi.org/10.48550/arXiv.2004.02553

2020-04-06

Abstract:A semi-analytical model has been developed to study a combined effect of Beamstrahlung due to beam-beam interaction and beam coupling impedance in the future lepton colliders CEPC and FCCee. This model allows evaluating an impact of the coupling impedance on the bunch length and energy spread in collision. The model is benchmarked against numerical simulations. Analytical estimates for the supercolliders are presented.

Accelerator Physics
Luminosity performance of SuperKEKB

Demin Zhou,Kazuhito Ohmi,Yoshihiro Funakoshi,Yukiyoshi Ohnishi

2023-06-05

Abstract:Since April 2020, the SuperKEKB has been operating with the crab waist scheme. The luminosity record achieved in June 2022 was $4.71 \times 10^{34} \text{ cm}^{-2}\text{s}^{-1}$, which overtook its predecessor KEKB by more than a factor of 2. The beam-beam interaction plays a key role in causing vertical blowup and consequently limiting the luminosity performance of SuperKEKB. In this paper, we examine luminosity tunings under the influence of beam-beam effects and review the luminosity performance of SuperKEKB with the crab-waist operation from 2020 to 2022.

Accelerator Physics
Beam-beam effects in BEPCII

Y. Zhang

DOI: https://doi.org/10.48550/arXiv.1410.4057

2014-10-15

Accelerator Physics

Abstract:We first introduce the design parameters of the Beijing Electron-Positron Collider II (BEPCII) and the simulation study of beam-beam effects during the design process of the machine. The main advances since 2007 are briefly introduced and reviewed. The longitudinal feedback system was installed to suppress the coupled bunch instability in January 2010. The horizontal tune decreased from 6.53 to 6.508 during the course of data taken in December, 2010. The saturation of the beam-beam parameter was found in 2011, and the vacuum chambers and magnets near the north crossing point were moved 15 cm in order to mitigate the long range beam-beam interaction. At the beginning of 2013, the beam-beam parameter achieved 0.04 with the new lower $\alpha_{p}$ lattice and the peak luminosity achieved 7 x 10$^{32}$ cm$^{-2}$ s$^{-1}$.
Beam Position Monitor Design for a Third Generation Light Source

Zhichu Chen,Yongbin Leng,Kairong Ye,Guobi Zhao,Renxian Yuan

DOI: https://doi.org/10.1103/physrevstab.17.112801

2014-01-01

Physical Review Special Topics - Accelerators and Beams

Abstract:The measurement of the beam orbit plays a very important role in particle accelerators. The button-type beam position monitor (BPM) was designed for the Shanghai Synchrotron Radiation Facility to reduce the impedances and to guarantee a high resolution of the measurement. Position resolution, beam impedance, higher-order mode, and impedance matching have been studied during the design based on the physical parameters of the storage ring at the Shanghai Synchrotron Radiation Facility. Meanwhile, an analytic formula of the BPM broadband impedance was derived based on a resistor-capacitor equivalent circuit. Thus, the impedance of the BPM could be analyzed quantitatively by simply measuring the capacitance of the electrode. This formula had been verified by comparing the results of the calculations of the formula and the simulations in MAFIA.
Impact of beam asymmetries at the Future Circular Collider e+e-

Peter Kicsiny,Xavier Buffat,Khoi Le Nguyen Nguyen,Tatiana Pieloni,Mike Seidel

2024-10-03

Abstract:In this paper we present detailed simulations with asymmetric initial beam settings in the context of the proposed Future Circular Collider e+e- (FCC-ee) using the Xsuite framework. We compare simulated equilibrium bunch sizes and luminosities against an already existing analytical model, which shows remarkably good agreement for realistic small perturbations. We investigate the longitudinal top-up injection, the currently preferred injection scheme for the FCC-ee, using self-consistent simulations featuring beam-beam collisions with beamstrahlung and the injection process, for the first time. We present and assess the sensitivity and required precision of the nominal beam parameters in a potential real-life operation by providing first estimates of the tolerances in the initial asymmetry of several machine parameters, with respect to the 3D flip-flop mechanism, obtained from parameter scan simulations.

Accelerator Physics
XY Factorization Bias in Luminosity Measurements

Anna Fehérkuti,Péter Major,Gabriella Pásztor

2024-12-02

Abstract:For most high-precision experiments in particle physics, it is essential to know the luminosity at highest accuracy. The luminosity is determined by the convolution of particle densities of the colliding beams. In special van der Meer transverse beam separation scans, the convolution function is sampled along the horizontal and vertical axes with the purpose of determining the beam convolution and getting an absolute luminosity calibration. For this purpose, the van der Meer data of luminometer rates are separately fitted in the two directions with analytic functions giving the best description. With the assumption that the 2D convolution shape is factorizable, one can calculate it from the two 1D fits. The task of XY factorization analyses is to check this assumption and give a quantitative measure of the effect of nonfactorizability on the calibration constant to improve the accuracy of luminosity measurements. \newline We perform a dedicated analysis to study XY non-factorization on proton-proton data collected in 2022 at $\sqrt{s} = 13.6$~TeV by the CMS experiment. A detailed examination of the shape of the bunch convolution function is presented, studying various biases, and choosing the best-fit analytic 2D functions to finally obtain the correction and its uncertainty.

High Energy Physics - Experiment
Correction of beam-beam effects in luminosity measurement at ILC

Strahinja Lukić,Ivan Smiljanić

DOI: https://doi.org/10.48550/arXiv.1211.6869

2012-11-29

Accelerator Physics

Abstract:Three methods for handling beam-beam effects in luminosity measurement at ILC are tested and evaluated in this work. The first method represents an optimization of the LEP-type asymmetric selection cuts that reduce the counting biases. The second method uses the experimentally reconstructed shape of the $\sqrt{s'}$ spectrum to determine the Beamstrahlung component of the bias. The last, recently proposed, collision-frame method relies on the reconstruction of the collision-frame velocity to define the selection function in the collision frame both in experiment and in theory. Thus the luminosity expression is insensitive to the difference between the CM frame of the collision and the lab frame. The collision-frame method is independent of the knowledge of the beam parameters, and it allows an accurate reconstruction of the luminosity spectrum above 80 % of the nominal CM energy. However, it gives no precise infromation about luminosity below 80 % of the nominal CM energy. The compatibility of diverse selection cuts for background reduction with the collision-frame method is addressed.

Formulae of luminosity and beam-beam tune shifts for flat-beam asymmetric colliders

Luminosity and beam-beam tune shifts with crossing angle and hourglass effects in e$^+$-e$^-$ colliders

Tune Shifts and Spreads Due to Short and Long Range Beam-Beam Interaction

Simulations and experimental results on beam-beam effects in SuperKEKB

Analytical Estimation of the Beam-Beam Interaction Limited Dynamic Apertures and Lifetimes in e^+e^- Circular Colliders

Impact of beam–beam effects on absolute luminosity calibrations at the CERN Large Hadron Collider

Formulae for estimating average particle energy loss due to Beamstrahlung in supercolliders

Luminosity Performance Studies of Linear Colliders with Intra-train Feedback Systems

Performance and luminosity models for heavy-ion operation at the CERN Large Hadron Collider

Impact of Beam-Beam Effects on Absolute Luminosity Calibrations at the CERN Large Hadron Collider

Strong-strong beam-beam simulations with lattices of circular e+e- colliders

Calculations of space-charge tune shifts in storage rings with extremely short bunches and small bunch spacing

Relations Between the Beam Characteristics on the Target and the Parameters of Thebeam Transport System

Model to study interplay between Beamstrahlung and coupling impedance in future lepton colliders

Luminosity performance of SuperKEKB

Beam-beam effects in BEPCII

Beam Position Monitor Design for a Third Generation Light Source

Impact of beam asymmetries at the Future Circular Collider e+e-

XY Factorization Bias in Luminosity Measurements

Correction of beam-beam effects in luminosity measurement at ILC