An augmented swirling and round jet impinging on a heated flat plate and its heat transfer characteristics

Premchand V Chandra,Pratikash P Panda,Pradip Dutta

DOI: https://doi.org/10.1016/j.icheatmasstransfer.2023.107121

2022-11-15

Abstract:A geometrical mechanism that generates augmented swirling and round jets is being proposed. The proposed geometry has an axial inlet port and three tangential inlet ports, each of diameter 10mm. A parameter called Split ratio, defined as the percentage of airflow split through these inlet ports, is introduced for the augmented jet. Flow at four different split ratios(SR 1,2,3, and 4) results in a single augmented jet of swirling and round jets of diameter D = 30mm, for which impingement heat transfer is predicted using 3D RANS numerical simulations. Also, computations for conventional round jets and swirling jets generated by an in-house geometrical vane swirler of 45, 60 and 30 degree vane angles each of jet diameter D = 30 mm are performed for the Reynolds number (Re = 6000 to 15,000) and at a jet-plate distance (H = 1.5D to 4D). A comparative study of the flow structures for all the jets using computations is done, followed by a limited discussion on Particle Image velocimetry (PIV) flow visualization results. An impingement heat transfer analysis for all the jets is studied numerically. It is inferred that at a smaller jet-plate distance H =1.5D, the augmented jet and vane swirler jets showed an improved heat transfer from the impingement surface (heated flat plate). In contrast, the conventional round jets showed maximum heat transfer at H = 4D. From the comparative study, the impingement heat transfer characteristics using the proposed augmented jet are better at an optimized jet-plate distance H=1.5D and at a split ratio (SR 4), with an enhancement in the average Nusselt number (Nu avg) of 88% than the conventional round jet and 101% than the vane-swirler jet counterpart. Similarly, an enhancement in the stagnation Nusselt number (Nu stg) of 189% than the round jet is predicted for the proposed augmented jet at SR-4.

Fluid Dynamics

What problem does this paper attempt to address?

### What problems does this paper attempt to solve?

This paper aims to solve the following two main problems:

1. **Improve the heat transfer efficiency of jet impingement**:
- The paper proposes a new geometric mechanism for generating augmented swirling and round jets and studies their impingement heat transfer characteristics on a heated flat plate. By introducing a new parameter called "Split Ratio (SR)", the authors attempt to optimize the heat transfer performance of such augmented jets.
- The research compares the heat transfer characteristics of traditional round jets, swirling jets generated by geometric swirlers, and the newly proposed augmented jets under different nozzle - plate distances (H/D) and Reynolds numbers (Re).

2. **Clarify the controversy over the heat transfer effects between traditional round jets and swirling jets**:
- There are differences in the evaluation of the impingement heat transfer effects of traditional round jets and swirling jets in the literature. Therefore, this paper conducts a comparative study through numerical simulation (3D RANS) to clarify this controversy and provide guidance for practical applications.

### Specific research contents include:

- **Propose a new jet mechanism**: A jet device with an axial inlet and three tangential inlets is designed, and the air - flow distribution is controlled by adjusting the split ratio.
- **Numerical simulation and experimental verification**: Use the RANS model for three - dimensional numerical simulation to calculate the flow structure and heat transfer characteristics under different jet conditions, and conduct partial verification through Particle Image Velocimetry (PIV) experiments.
- **Parameter study**: Study the effects of jet - plate distance (H/D), Reynolds number (Re), geometric swirl number (S), and split ratio (SR) on heat transfer characteristics.
- **Result analysis**: Through the comparison of different jet types, it is found that the augmented jet shows a significant heat transfer enhancement effect under optimized conditions (such as H/D = 1.5 and SR - 4), with the average Nusselt number (Nu avg) increased by 88% and the stagnation point Nusselt number (Nu stg) increased by 189%.

### Conclusion:
This research shows that by optimizing the jet structure and parameter settings, the heat transfer efficiency of jet impingement can be significantly improved. Especially at a short distance (H/D = 1.5) and a specific split ratio (SR - 4), the heat transfer performance of the augmented jet is better than that of traditional round jets and swirling jets.

### Related formulas:
- Definition of split ratio:
\[
\text{Split Ratio (SR)}=\frac{\text{Percentage of air - flow through each inlet}}{\text{Total air - flow volume}}
\]
- Definition of swirl number:
\[
S = \frac{2}{3}\left[\frac{1-\left(\frac{D_h}{D_0}\right)^3}{1-\left(\frac{D_h}{D_0}\right)^2}\right]\tan\theta
\]
- Calculation of Reynolds number:
\[
Re=\frac{\rho v(D_0 - D_h)}{\mu}
\]

These formulas help to understand the quantitative relationships between jet structures and heat transfer characteristics.