Abstract:Transition metal oxalates have attracted wide attention due to the characteristics of the conversion reaction as anode materials in lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs), However, there are huge volume expansion and sluggish circulation dynamics during the reversible Li+ and Na+ insertion/extraction process, which would lead to unsatisfactory reversible capacity and stability. In order to solve these problems, a rod-like structure Ni0.5Co0.5C2O4·2H2O is in-situ formed on the reduced graphene oxide layer (Ni0.5Co0.5C2O4·2H2O/rGO) in a glycol-water mixture medium via an interface induced engineering strategy. Benefitting from the synergistic cooperation of nano-diameter rod-like structure and high conductive rGO networks, the experimental results show that the prepared Ni0.5Co0.5C2O4·2H2O/rGO electrode has predominant rate performance and ultra-long cycle stability. For the LIBs, it not only exhibits an ultrahigh reversible capacity (1179.9 mA h g-1 at 0.5 A g-1 after 300 cycles), but also presents outstanding rate and cycling performance (646.5 mA h g-1 at 5 A g-1 after 1200 cycles). Besides, the Ni0.5Co0.5C2O4·2H2O/rGO electrode displays remarkable sodium storage capacity of 221.6 mA h g-1 after 100 cycles at 0.5 A g-1. Further, the extraordinary electrochemical capability of Ni0.5Co0.5C2O4·2H2O/rGO active material is also reflected in two full-cells, assembled using commercial LiCoO2 as cathode for LIBs and commercial Na3V2(PO4)3 as cathode for SIBs, both of which can show wonderful specific capacity and cycling stability. It is found in in-situ Raman experiments that the reversible changes of oxalate peaks are monitored in a charge/discharge process, which is scientific evidence for the transform reaction mechanism of metal oxalates in LIBs. These findings not only provide important ideas for studying the charge/discharge storage mechanism but also give scientific basis for the design of high-performance electrode materials.

Diffusion mechanism and electrochemical investigation of 1T phase Al-MoS$_{2}$@rGO nano-composite as a high-performance anode for sodium-ion batteries

Diffusion Mechanism and Electrochemical Investigation of 1~T Phase Al-Mos$_{2}$@Rgo Nano-Composite as a High-Performance Anode for Sodium-Ion Batteries

Aliovalent doping and structural design of MoSe2 with fast reaction kinetics for high-stable sodium-ion half/full batteries

Confined Mo 2 C/MoC heterojunction nanocrystals-graphene superstructure anode for enhanced conversion kinetics in sodium-ion batteries

3D MoS2/graphene oxide integrated composite as anode for high-performance sodium-ion batteries

Molybdenum Disulfide/Reduced Graphene Oxide Nanocomposite with Expanded Interlayer Spacing for Sodium Ion Batteries

Synthesis and Electronic/ionic Transport Properties of MoO2/rGO Anode for Lithium Ion Batteries

Interlayer Engineering and Electronic Regulation of MoSe2 Nanosheets Rolled Hollow Nanospheres for High-Performance Sodium-Ion Half/full Batteries

Exfoliated MoS2 Sheets and Reduced Graphene Oxide-An Excellent and Fast Anode for Sodium-ion Battery

Effect of MoS 2 and electrolyte temperature on the electrochemical performance of NiCoS@rGO-based electrode material for energy storage, oxygen reduction reaction and electrochemical glucose sensor

Constructing MoO2@MoS2 heterostructures anchored on graphene nanosheets as a high-performance anode for sodium ion batteries

Synergistic γ‐In2Se3@rGO Nanocomposites with Beneficial Crystal Transformation Behavior for High‐Performance Sodium‐Ion Batteries

3D reduced graphene oxide wrapped MoS2@Sb2S3 heterostructures for high performance sodium-ion batteries

Synergistic & gamma;-In2Se3@rGO Nanocomposites with Beneficial Crystal Transformation Behavior for High-Performance Sodium-Ion Batteries

One-step hydrothermal synthesis of amorphous CoMoS4/N-rGO nanocomposites as anode materials with improved cyclability for sodium-ion batteries

A novel synthesis of Nb2O5@rGO nanocomposite as anode material for superior sodium storage

Honeycomb‐Structured MoSe2/rGO Composites as High‐Performance Anode Materials for Sodium‐Ion Batteries

Rod-like Ni0.5Co0.5C2O4·2H2O in-situ formed on rGO by an interface induced engineering: Extraordinary rate and cycle performance as an anode in lithium-ion and sodium-ion half/full cells

In-situ Growth of Vertically Aligned MoS2 Nanowalls on Reduced Graphene Oxide Enables a Large Capacity and Highly Stable Anode for Sodium Ion Storage

Synthesis and Electrochemical Characterization of 2D SnS2/RGO As Anode Material in Sodium-Ion Batteries

Two-phase Solvothermal Synthesis of MoO2/RGO Nanocomposites for Lithium-Ion Battery Anodes