Abstract:Ytterbium (Yb) doped optical fibers are widely used in high-power applications and ultrafast lasing since they show adequate power-handling capability and provide desirable beam quality. Yb-doped fibers with large core area can support high power but often act as a multimode fiber and compromise the output beam quality. Hence, it is important to attain a proper balance between the power-handling capability and the beam quality. Yb-doped fibers as a gain medium in pulsed fiber laser systems are prone to nonlinear optical effects due to the presence of high peak power in the ultrashort pulses. Nonlinearity such as self phase modulation (SPM) affects the width and the shape of the pulse, both temporally and spectrally, by inducing chirp during its propagation along the fiber. In this work, finite element method was employed to compute linearly polarized transverse modes and the corresponding modal powers of Yb-fibers with different core areas to optimize the trade-off between the power-handling capability and the beam quality. The optimal fiber was implemented as a gain medium in a passively mode-locked fiber laser system to generate an ultrashort picosecond pulse. The spectral width of the picosecond pulse was studied as a function of pump power to spot the presence of SPM and chirp. To grow a better understanding on the chirped pulse propagation in the fiber, nonlinear Schrödinger equation was numerically simulated in the anomalous dispersion regime under the influence of initial chirp. The simulations reveal a strategy to compress a pulse temporally and utilize it in all-fiber chirped pulse amplification to mitigate nonlinearity in high power applications.

Spectral shaping of an ultrafast modelocked Ytterbium fiber laser output through a passive intracavity optical filter; a simple and reliable route to sub-45 fs pulses

Self-phase modulation enabled, wavelength-tunable ultrafast fiber laser sources: an energy scalable approach.

A Widely Tunable Single-Longitudinal-mode Ytterbium-Doped Fiber Laser Based on Fiber Lyot Filter

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

High Repetition-Rate Pulse Shaping of a Spectrally Broadened Yb Femtosecond Laser

Ytterbium-doped fibers for high-power fiber lasers

High-Energy Femtosecond Pulses From an Ytterbium-Doped Fiber Laser With a New Cavity Design

Synthesis of single-cycle pulses based on a Yb:KGW laser amplifier

Strictly all-fiber picosecond ytterbium fiber laser utilizing chirped-fiber-Bragg-gratings for dispersion control

A Linearly Polarized Wavelength-Tunable Q-Switched Fiber Laser with a Narrow Spectral Bandwidth of 112 MHz

Efficient single-cycle pulse compression of an ytterbium fiber laser at 10 MHz repetition rate

Single-frequency Fiber Laser from Linear Cavity with Loop Mirror Filter and Dual-Cascaded FBGs

A Compact 51.6-W, 26-Μj, Yb-doped All-Fiber Integrated CPA System Through Quasi-Rectangular Pulse Pre-Shaping

All Polarization-maintaining Passively Mode-locked Ytterbium-doped Fiber Lasers, Behavior under Two Different Cavity Configurations

Timing-Jitter Reduction by Use of a Spectral Filter in a Broadband Femtosecond Fiber Laser

SESAM mode-locked all-polarization-maintaining fiber linear cavity ytterbium laser source with spectral filter as pulse shaper

Compact, All-PM Fiber Integrated and Alignment-Free Ultrafast Yb:Fiber NALM Laser With Sub-Femtosecond Timing Jitter

A compact 51.6-W, 26- μ J, Yb-doped all-fiber integrated CPA system through quasi-rectangular pulse pre-shaping

Broadband tunable single-frequency Yb-doped fiber laser with dual ring subcavity and Sagnac ring filter

Comparative study of spectral broadening and few-cycle compression of Yb:KGW laser pulses in gas-filled hollow-core fibers

Compact Yb Fiber Few-Cycle Pulse Source Based on Precision Pulse Compression and Shaping with an Adaptive Fiber Bragg Grating.