Abstract:Background: The beam energy is one of the most significant parameters in particle therapy since it is directly correlated to the particles' penetration depth inside the patient. Nowadays, the range accuracy is guaranteed by offline routine quality control checks mainly performed with water phantoms, 2D detectors with PMMA wedges, or multi-layer ionization chambers. The latter feature low sensitivity, slow collection time, and response dependent on external parameters, which represent limiting factors for the quality controls of beams delivered with fast energy switching modalities, as foreseen in future treatments. In this context, a device based on solid-state detectors technology, able to perform a direct and absolute beam energy measurement, is proposed as a viable alternative for quality assurance measurements and beam commissioning, paving the way for online range monitoring and treatment verification. Purpose: This work follows the proof of concept of an energy monitoring system for clinical proton beams, based on Ultra Fast Silicon Detectors (featuring tenths of ps time resolution in 50 μm active thickness, and single particle detection capability) and time-of-flight techniques. An upgrade of such a system is presented here, together with the description of a dedicated self-calibration method, proving that this second prototype is able to assess the mean particles energy of a monoenergetic beam without any constraint on the beam temporal structure, neither any a priori knowledge of the beam energy for the calibration of the system. Methods: A new detector geometry, consisting of sensors segmented in strips, has been designed and implemented in order to enhance the statistics of coincident protons, thus improving the accuracy of the measured time differences. The prototype was tested on the cyclotron proton beam of the Trento Protontherapy Center (TPC). In addition, a dedicated self-calibration method, exploiting the measurement of monoenergetic beams crossing the two telescope sensors for different flight distances, was introduced to remove the systematic uncertainties independently from any external reference. Results: The novel calibration strategy was applied to the experimental data collected at TPC (Trento) and CNAO (Pavia). Deviations between measured and reference beam energies in the order of a few hundreds of keV with a maximum uncertainty of 0.5 MeV were found, in compliance with the clinically required water range accuracy of 1 mm. Conclusions: The presented version of the telescope system, minimally perturbative of the beam, relies on a few seconds of acquisition time to achieve the required clinical accuracy and therefore represents a feasible solution for beam commission, quality assurance checks, and online beam energy monitoring.

Performance of a prototype TORCH time-of-flight detector

Status of the TORCH time-of-flight project

Picosecond timing of charged particles using the TORCH detector

TORCH: Time of Flight Identification with Cherenkov Radiation

Cosmic Ray Test of a STCF DTOF Detector Prototype

A Prototype Combination TPC Cherenkov Detector with GEM Readout for Tracking and Particle Identification and its Potential Use at an Electron Ion Collider

Photon Detector System Timing Performance in the DUNE 35-Ton Prototype Liquid Argon Time Projection Chamber

R&D on Picosecond Timing TOF Counter

FPGA Based Pico-second Time Measurement System for a DIRC-like TOF Detector

A high sensitivity Cherenkov detector for Prompt Gamma Timing and Time Imaging

A Novel Multi-Anode MCP-PMT with Cherenkov Radiator Window

Performance of a New LMRPC Prototype for the STAR MTD System

Design of a Neutron-Tpc Prototype and Its Performance Evaluation Based on an Alpha-Particle Test

A large area 100 channel Picosec Micromegas detector with sub 20 ps time resolution

A two-layer Timepix3 stack for improved charged particle tracking and radiation field decomposition

Picosecond Timing Electronics for a DIRC-Like Detector at the Super Tau-Charm Facility

Performance of TPC Detector Prototype Integrated with UV Laser Tracks for the Circular Collider

Performance of an optically read out time projection chamber with ultra-relativistic electrons

Calibration method and performance of a time-of-flight detector to measure absolute beam energy in proton therapy

Time Projection Chamber for GADGET II

Development and test of a real-size MRPC for CBM-TOF