Abstract:Single-photon detectors (SPDs) play important roles in highly sensitive detection applications, such as fluorescence spectroscopy, remote sensing and ranging, deep space optical communications, elementary particle detection, and quantum communications. However, the adverse conditions in space, such as the increased radiation flux and thermal vacuum, severely limit their noise performances, reliability, and lifetime. Herein, we present the example of spaceborne, low-noise, high reliability SPDs, based on commercial off-the-shelf (COTS) silicon avalanche photodiodes (APD). Based on the high noise-radiation sensitivity of silicon APD, we have developed special shielding structures, multistage cooling technologies, and configurable driver electronics that significantly improved the COTS APD reliability and mitigated the SPD noise-radiation sensitivity. This led to a reduction of the expected in-orbit radiation-induced dark count rate (DCR) increment rate from ∼219 counts per second (cps) per day to ∼0.76 cps/day. During a continuous period of continuous operations in orbit which spanned of 1029 days, the SPD DCR was maintained below 1000 cps, i.e., the actual in-orbit radiation-induced DCR increment rate was ∼0.54 cps/day, i.e., two orders of magnitude lower than those evoked by previous technologies, while its photon detection efficiency was > 45%. Our spaceborne, low-noise SPDs established a feasible satellite-based up-link quantum communication that was validated on the quantum experiment science satellite platform. Moreover, our SPDs open new windows of opportunities for space research and applications in deep-space optical communications, single-photon laser ranging, as well as for testing the fundamental principles of physics in space.

CubeSat in-orbit validation of in-situ performance by high fidelity radiation modelling

Radiation tests of a CubeSat OBC

Radiation tolerance of opto-electronic components proposed for space-based quantum key distribution

Protocols for healing radiation-damaged single-photon detectors suitable for space environment

Thermo-mechanical design for a miniaturized quantum light source on board the SpooQy-1 CubeSat

Mitigating radiation damage of single photon detectors for space applications

Analysis and modeling of space radiation effects in quantum dot based nanomaterials for high-efficiency photovoltaic cells

CubeSat quantum communications mission

The CELESTA CubeSat In-Flight Radiation Measurements and their Comparison with Ground Facilities Predictions

End-to-End Demonstration for CubeSatellite Quantum Key Distribution

Characterization of more than three years of in-orbit radiation damage of SiPMs on GRBAlpha and VZLUSAT-2 CubeSats

Spaceborne, Low-Noise, Single-Photon Detection for Satellite-Based Quantum Communications.

A Case for Application-Aware Space Radiation Tolerance in Orbital Computing

Evaluation of the performance of a CdZnTe-based soft -ray detector for CubeSat payloads

Evaluation of the performance of a CdZnTe-based soft $γ$-ray detector for CubeSat payloads

Low Cost Radiation Hardened Software and Hardware Implementation for CubeSats

In Orbit Performance and Radiation Damage High Temperature Annealing of APD Single Photon Detector of Micius Satellite

Radiation effect on silicon photonics chips for space quantum key distribution

Real-time, in situ probing of gamma radiation damage with packaged integrated photonic chips

Simulating Optical Single Event Transients on Silicon Photonic Waveguides for Satellite Communication

In-orbit dark count rate performance and radiation damage high-temperature annealing of silicon avalanche photodiode single-photon detectors of the Micius satellite