Abstract:Additive manufacturing is increasingly being employed to produce components of complex geometries in structural alloys because of the expected energy savings associated with the near-net-shape capability and the ability to build in novel internal features that are not possible with many conventional manufacturing approaches. However, because of the extreme thermal conditions encountered, the non-equilibrium microstructures produced during powder bed-based additive manufacturing processes must be subjected to custom post-heat treatment processes to recover the target mechanical properties. Phase-field models and simulation techniques have matured to a state where the microstructure evolution paths, and the morphologies of the resulting precipitate phases can be predicted reasonably accurately, considering alloy-specific thermodynamic and kinetic aspects of the nucleation and growth processes. However, phase-field simulations are computationally intensive, which precludes the ability to apply the simulations directly to the length scale of the entire component. Therefore, it is highly desirable to develop low-computational-cost surrogate models that effectively capture the physics at the microstructural length scale, while facilitating the design of optimized processing conditions resulting in location-specific targeted microstructures at the component scale. The work presented here demonstrates the application of the materials knowledge system framework to develop a surrogate model that effectively captures the microstructural path during annealing of a Ni–Mo–Nb alloy containing different Mo and Nb compositions known to segregate during solidification under additive manufacturing conditions. Specifically, the surrogate model built in this work is based on a Gaussian process autoregressive model informed by statistical representation of simulated microstructures using two-point correlations and dimensionality reduction through principal component analysis. This surrogate model is shown to capture the bifurcation of the microstructural path during precipitation, which yields a microstructure dominated by the phase at high Nb concentrations and the phase at low Nb concentrations.

A Phase-Field Study on the Effects of Nanoparticles on Solidification and Grain Growth

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Constitutive modeling of mechanical behaviors in gradient nanostructured alloys with hierarchical dual-phased microstructures

Modelling the Plastic Deformation of Nanostructured Metals with Bimodal Grain Size Distribution

A Physically-Based Plastic Constitutive Model Considering Nanoparticle Cluster Effect for Metal Matrix Nanocomposites

Modification of Precipitate Coarsening Kinetics by Intragranular Nanoparticles—A Phase Field Study

The Influence of Nanoparticles on Dendritic Grain Growth in Mg Alloys

Phase-field model of isothermal solidification in multicomponent alloys for multiple grains

Engulfment and distribution of second-phase nanoparticle during dendrite solidification of an Al–Si binary alloy: a simulation study

Atomistic insights into the synergistic effect of nanotwins and nano-precipitates on the mechanical behavior of superalloys

Impact of Secondary‐Phase Particle Morphology on Grain Growth in Pure Copper Using a Phase Field Simulation Approach

Phase-field modeling of $γ/γ''$ microstructure formation in Ni-based superalloys with high $γ''$ volume fraction

Intermetallic particle heterogeneity controls shear localization in high-strength nanostructured Al alloys

A Gaussian process autoregressive model capturing microstructure evolution paths in a Ni–Mo–Nb alloy

Development and Numerical Testing of a Model of Equiaxed Alloy Solidification Using a Phase Field Formulation

Bulk nanocrystalline Al alloys with hierarchical reinforcement structures via grain boundary segregation and complexion formation

Complex strengthening mechanisms in nanocrystalline Ni-Mo alloys revealed by a machine-learning interatomic potential

Effect of Coherent Nanoprecipitate on Strain Hardening of Al Alloys: Breaking through the Strength-Ductility Trade-Off

Nanomodification of aluminum alloys

Three-dimensional phase field simulation for rafting of multiparticle precipitate in elastic inhomogeneous alloy under external stress

Applications of unified phase-field methods to designing microstructures and mechanical properties of alloys