Abstract:The purpose of this research is to develop a practical system for building damage detection in dense urban areas after natural disasters such as earthquakes, typhoons, and tsunamis. A novel approach is presented that allows real-time building change detection using high resolution aerial images and existing 3D building data. The developed system contains two major processing modules: inflight processing and ground processing. Inflight processing module mainly extracts feature information from images acquired by an airborne digital camera, and compresses them in order to transfer to the ground. Ground processing module is responsible to analyze building changes by comparing the feature information to the existing 3D data. The automated change detection is performed by the following steps: firstly, edge features of all buildings in the aerial images are extracted on board of an aircraft; Then, the outlines of each building, which are extracted from the 3D building data, are projected onto the images based on the interior and exterior orientation parameters of the camera, and compared to the extracted edge features of each building in the images. The Portion Hausdorff Matching is applied to calculate the similarities between the projected outlines and the extracted edge features. Finally, collapsed buildings are detected using the calculated similarities. The maximal similarity between the edge features and the projected outlines in the direction of projection can be used to detect the change in building height. This approach is verified using an airborne digital camera UltraCamD image and corresponding 3D building data of Tokyo, Japan. The heights of some buildings in the 3D building data are manually modified in order to simulate building changes. The experimental results show that among 1320 buildings used in the test, 45 buildings are successfully detected as collapsed or removed. Among them, 9 buildings are correctly detected out of 10 collapsed buildings. Also, 2885 buildings are used in another test for detecting changes in building heights. 11 of the 27 buildings known to have height changes are successfully detected. The experimental results indicate that the proposed approach shows great potential for practical applications although still faces challenges from factors such as inaccurate 3D building data, occlusions due to high building density, and small changes in building height. ©2009 IEEE.

Building Change Detection using Multi-Temporal Airborne LiDAR Data

Object-Based Analysis of Airborne LiDAR Data for Building Change Detection

Building Change Detection Based on 3D Reconstruction.

Analysis and Verification of Building Changes Based on Point Clouds from Different Sources and Time Periods

3D BUILDING CHANGE DETECTION BETWEEN CURRENT VHR IMAGES AND PAST LIDAR DATA

Building Change Detection with RGB-D Map Generated from UAV Images

LiDAR-guided dense matching for detecting changes and updating of buildings in Airborne LiDAR data

Semantic Supported Urban Change Detection Using ALS Point Clouds

Building Change Detection from Bi-Temporal Dense-Matching Point Clouds and Aerial Images.

Using Octrees To Detect Changes To Buildings And Trees In The Urban Environment From Airborne Lidar Data

Multi-level Monitoring of Three-Dimensional Building Changes for Megacities: Trajectory, Morphology, and Landscape

3D urban object change detection from aerial and terrestrial point clouds: A review

Integrated Change Detection and Classification in Urban Areas Based on Airborne Laser Scanning Point Clouds

A Deep Learning Approach To Detecting Changes In Buildings From Aerial Images

Building change detection using aerial images and existing 3D data

Change Detection of Buildings Based on Terrestrial Laser Scanning Data

The Change Detection of Building Models Using Epochs of Terrestrial Point Clouds

Classification and Change Detection in Mobile Mapping LiDAR Point Clouds

Building Change Detection on High-Resolution Imagery with a Multi-task Semantic Change Detection Method

A Volumetric Change Detection Framework Using UAV Oblique Photogrammetry - A Case Study of Ultra-High-resolution Monitoring of Progressive Building Collapse

Building Change Detection in Remote Sensing Images Based on Dual Multi-Scale Attention