Abstract:The flexible high-aspect-ratio wings of high-altitude long-endurance unmanned aerial vehicles experience large geometrical deformations. The nonlinear aeroelastic analysis for such a wing is carried out by using a loosely-coupled CFD/CSD method, which treats the fluid and structure as two separate modules and updates the CFD and CSD variables separately with a transfer of variables at the fluid–structure interface. In the loosely-coupled method employed here, an unsteady Euler solver and a nonlinear CSD solver are joined together by a fully three-dimensional integral constant volume tetrahedron (CVT) interfacing technique. The computation process is very time-consuming when the computed incremental displacements of every aerodynamic node on the wing surface are fully added to the previously computed deformed wing configuration. For a maximum deflection of approximately 8.7 mm (0.54% of semi-span length), the coupled computation scheme takes 20 coupling iteration steps with about 72 hours to converge on an HP XW6400 workstation with a 3 GHz Xeon5160 CPU. To reduce the computational expense of this loosely-coupled method, the golden section technique with an empirical parameter is introduced to speed up convergence. The deflections relaxed by using this technique are assimilated, and the wing bends up monotonically to its static equilibrium position with a maximum deflection 44.9 mm. The convergence history shows that, this accelerated algorithm takes just 6 coupling iteration steps with about 24 hours to monotonically converge to its static equilibrium position, although the maximum deflection 44.9 mm is 5 times larger than the maximum deflection 8.7 mm of the above test case with aeroelastic deflections fully assimilated. So, it is employed in the following nonlinear fluid–structure interaction (FSI) computations. After this nonlinear aeroelastic system has reached its static equilibrium position, the aerodynamic loads on wing surface are extracted and then applied onto the linear wing structure to calculate its deformation. In present paper, if the geometric nonlinear effects are taken into account for wing deflection calculation, the wing structure model is named as “nonlinear wing structure”; otherwise, the wing structure model is named as “linear wing structure”. The role of geometric nonlinearity on aeroelastic deformation is analyzed by comparing the deformations of linear and nonlinear wing structures. It is shown that, geometric nonlinearity plays an important role for large static aeroelastic deformation and should be accounted for in aeroelastic analyses for such high-aspect-ratio flexible wings.

A consistent co-rotational formulation for aerodynamic nonlinear analysis of flexible frame structures

A co-rotational formulation for quasi-steady aerodynamic nonlinear analysis of frame structures

A Quasi-Steady 3-DoFs Sectional Aerodynamic Model: Preliminary Results

Modified Solution Strategy Of Framed Structures For Geometrically Nonlinear Analysis

An improved co-rotational algorithm for nonlinear aeroelasticity solution

A Comprehensive Framework for Coupled Nonlinear Aeroelasticity and Flight Dynamics of Highly Flexible Aircrafts

Accelerated loosely-coupled CFD/CSD method for nonlinear static aeroelasticity analysis

A Method for Nonlinear Aeroelasticity Trim and Stability Analysis of Very Flexible Aircraft Based on Co-Rotational Theory

Aeroelastic Modeling Using Geometrically Nonlinear Solid-Shell Elements

A New Method for Modeling of Fully Flexible Aircrafts

A Consistent Corotational Formulation for the Nonlinear Dynamic Analysis of Sliding Beams

A Novel Nonlinear Aerodynamic Model of Flutter and Buffeting Based on Condensed DOFs Technology

Nonlinear dynamics of slender structures: a new object-oriented framework

Modeling and Simulations for Fluid and Rotating Structure Interactions

Computation of Unsteady Viscous Flow Around a Locally Flexible Airfoil at Low Reynolds Number

Numerical Investigation of Structural Geometric Nonlinearity Effect in High-Aspect-ratio Wing Using CFD/CSD Coupled Approach

A novel 3D variational aeroelastic framework for flexible multibody dynamics: Application to bat-like flapping dynamics

Absolute Nodal Coordinate Formulation With Vector-Strain Transformation for High Aspect Ratio Wings

Efficient Aeroelastic Reduced Order Model with Global Structural Modifications

A Hybrid Reduced-Order Framework for Complex Aeroelastic Simulations

A variational flexible multibody formulation for partitioned fluid-structure interaction: Application to bat-inspired drones and unmanned air-vehicles