Abstract:In a hypervelocity impact (HVI) between the micrometeoroids/orbital debris (MMOD) and multi-layered shielding mechanisms of spacecraft, the debris cloud, formed by shattered materials of the outer bumper layer and projectile, commits multitudinous pitting craters and cracks that are disorderedly scattered in the rear wall layer. Material degradation due to the pitting damage is a precursor of structural fragmentation and system failure of the space assets. In this study, microscopic material degradation of the rear wall of a typical dual-layered Whipple shield, initiated and intensified by the debris cloud-engendered pitting damage, is characterized using metallographic analysis including optical microscope (OM), laser scanning microscope (LSM), scanning electron microscope (SEM) and X-ray diffraction (XRD). Results have revealed that (1) the degree of material degradation shows difference in the central cratered area, the ring cratered area, and the spray area, respectively; (2) the dynamic recrystallization gives rise to the formation of fine grains adjacent to pitting craters; (3) the extents of recrystallization and dislocation depend on the strain rate levels during HVI; and (4) the temperature elevation, caused by the heat transformed from the adiabatic plastic deformation energy and shock heating, warrants the recrystallization. Two types of damage, namely micro-voids and micro-cracks, are identified beneath the pitting damage area; under the extremely high compressive strain rate induced by HVI, micro-voids are initiated by the nucleation of grains or deteriorate from existing material defects, and these micro-voids further expand at the grain boundaries and within the grains to form micro-cracks under a tensile-type wave converted from the HVI-induced shock wave.

A Predictive Model for Micrometeoroid Damage to Gossamer Structures

Study on Analysis Model of Deployable Space Membrane Structure

The Influence of the Space Debris on the Inflatable Antenna

Analyzing Micrometeoroid and Orbital Debris Shield Performance for Sample Return Spacecraft

Debris/Micrometeoroid Impacts and Synergistic Effects on Spacecraft Materials

Damage to Relativistic Interstellar Spacecraft by ISM Impact Gas Accumulation

Design, fabrication, and hypervelocity impact testing of screen-printed flexible micrometeoroid and orbital debris impact sensors for long-duration spacecraft health monitoring

Design and evaluation of additively manufactured polyetherimide orbital debris shielding for spacecraft

Micrometeoroid/space debris effects on materials

Response characteristics and impact resistance of composite laminates with shear stiffening gel under hypervelocity impact

Modal Analysis of Inflatable Shield for Space Debris

Hypervelocity Impact Phenomenon in Bulk Metallic Glasses and Composites**

Study of Space Microimpacts on Solar Cells and Evaluation of Resultant Degradation

Experimental Study of Micrometeoroids Impacts on an X-Ray Telescope Model using Micro-pore Optics and CMOS Detector with Micron-sized Particles

Mechanisms of failure of aluminium-based Whipple shields under hypervelocity impact: insights from continuum simulations

Microscopic approach to analyze solar-sail space-environment effects

Microstructural Material Characterization of Hypervelocity-Impact-induced Pitting Damage

Performance analysis for spacecraft shield structures against meteoroid and space debris

Investigation on High-Velocity Impact of Micron Particles Using Material Point Method

Experimental Research on Hypervelocity Impact Characteristics of Flexible Anti?debris Multi?shields Structure

Experimental Study of Hypervelocity Impact Characteristics for Fiber Fabric Materials