Abstract:Modern aluminum industries need an in-depth understanding and a more accurate prediction of the flow stress and microstructure evolution during multi-stage thermomechanical processing. The underlying mechanisms of Al alloys are distinct from that of other metallic materials (e.g., steels and copper) owing to the very high stacking fault energy. In the hot forming process of ultra-high strength Al-Zn-Mg-Cu alloys, the high alloying element additions have a more complex effect on multiple static softening mechanisms during post-deformation, i.e. the coupled recovery, recrystallization, precipitation and their interactions, which have not been well revealed and included in the existing plasticity models. In the present work, an integrated physically based model based on the observed microstructural characteristics and static softening behavior was developed to unravel the multiple static softening mechanisms following multi-stage hot deformation of Al-Zn-Mg-Cu alloys. By incorporating the multicomponent effects, i.e. process variables and chemical compositions, into static recovery, static recrystallization and precipitate coarsening models, the evolutions of stress, microstructure and static softening fraction could be accounted reasonably during post-deformation holding. A special attention was paid to model the functions of various alloy solute contents (i.e. Zn, Mg, Cu and Zr) on the precipitation thermodynamic, recovery and recrystallization kinetics in Al-Zn-Mg-Cu alloys. After validating by experimental data, the integrated physically based model could predict the effects of alloying elements on microstructural evolution, recrystallization and static softening kinetics of Al-Zn-Mg-Cu alloys. It was found that the different precipitation behaviors due to the addition of various alloying elements have a considerable influence on recovery, recrystallization and coupled static softening process. The solid solution atoms remaining in the matrix basically contributed to grain boundaries mobility and then slow recrystallization process, which depended on the interaction parameter, binding energy and diffusion rates of various alloying elements. This work offers an in-depth understanding of static softening mechanisms and provides a potential way for future development of advanced models and design strategies for multi-stage thermomechanical processes in Al-Zn-Mg-Cu alloys.

Characterization and modeling of the influence of initial microstructure on recrystallization of zircaloy-4 during hot forming

Modeling CDRX and PDRX during hot forming of zircaloy-4

Simulation of continuous dynamic recrystallization using a level-set method

Modelling of Dynamic Recrystallization in Hot Working

A Continuous Dynamic Recrystallization Constitutive Model Combined with Grain Fragmentation and Subgrain Rotation for Aluminum Alloy 2219 under Hot Deformation

Dynamic Recrystallization Behavior and Model Study of Equiaxed Fine Grain Structure TC4

Influence of Active Recovery and Initial Microstructures on Metadynamic Recrystallization of 5083 Aluminum Alloy

Modeling the Micromechanical Behaviors of Zircaloy-2 Alloy under Large Deformation

Investigation of Constitutive Models and Microstructure Evolution During Hot Deformation and Solution Treatment of Al-Zn-Mg-Cu Alloy

An Integrated Simulation of Multiple-Pass U-10Mo Alloy Hot Rolling and Static Recrystallization

Numerical Modeling of Grain Refinement During Solidification of Mg-4Y-3Nd (wt.%) Alloy Via Mesh-Anisotropy Reduction Algorithm

Kinetics and microstructural evolution during recrystallization of a single crystal superalloy

Modeling of Dynamic Recrystallization Kinetics of a High Strength Low Alloy Steel During Hot Rolling

A New Dynamic Recrystallization Kinetics Model of Cast-Homogenized Magnesium Alloys

Better understand the crystallization dynamics of ZrCu TFMGs: Benefits of combining global and local in situ approaches

Dynamic Recrystallization Phenomenon in Hot-Working Process by Multi-Phase-field Model

A Polycrystal Plasticity-Cellular Automaton Integrated Modeling Method for Continuous Dynamic Recrystallization and Its Application to Aa2196 Alloy

Unravelling the Hot Working Behavior, Constitutive Modeling, and Processing Map for Controlling the Microstructure of Sintered Al–Zn–Mg Alloy

The dynamic recrystallization behavior of the Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr titanium alloy during hot rolling based on macro-meso multiscale crystal plasticity finite element approach

Study of the Dynamic Recrystallization Behavior of Mg-Gd-Y-Zn-Zr Alloy Based on Experiments and Cellular Automaton Simulation

Integrated physically based modeling for the multiple static softening mechanisms following multi-stage hot deformation in Al-Zn-Mg-Cu alloys