Abstract:Despite great improvements in computing hardware and developments of new methodologies for solving partial differential equations (PDEs), solving PDEs numerically can still be computationally prohibitive for certain applications. This computational difficulty is especially true when the solution of PDEs is tied to characterization, control, design, or other inverse problems in general. Most of the traditional PDE solution strategies, such as the Finite Element Method or Finite Volume Method can require hundreds of thousands of degrees of freedom to accurately capture the behavior of even relatively simple physical system. The computational cost is several orders of magnitude higher for solving optimization problems (a common approach to solve inverse problems), which require obtaining several solution fields. Hence, model order reduction is necessary to enable the solution of such optimization problems with sufficient efficiency to allow practical applicability. Several approaches have been developed to create accurate reduced-order models (ROMs) of physical systems with dramatically reduced computational expense. Yet, several questions remain as to the optimal approach to create ROMs for a given physical system to ensure suitable accuracy, and even more so in relation to inverse problem applications. The objective of the present work is to address issues relating to the creation of suitably accurate ROMs that can be utilized for the solution of a variety of computational inverse mechanics problems. This work focuses on ROMs that utilize proper orthogonal decomposition (POD) to create a reduced-order basis for the PDE solution from a set of previously obtained potential solution fields (i.e., snapshots) of the system of interest. First, a generally applicable algorithm is presented to efficiently create accurate ROMs for use in solving inverse problems in material characterization (i.e., nondestructive evaluation). This algorithm is based upon a novel concept for maximizing the diversity of the system snapshots used to create the ROM. Results show that by maximizing the snapshot diversity, the accurate generalization of the resulting ROM is substantially improved, which then improves inverse problem solution capabilities. Then, a comprehensive study is presented of the capability of a set of different approaches for reduced-order modeling (all still using POD) to represent systems involving flow past bluff bodies. One of the relatively unexplored issues when creating ROMs for fluid flows is the accuracy with respect to changes in Reynolds (Re) number. The present work uses the generalized POD technique to create ROMs that are capable of predicting flow field not only at different time levels, but also at different Re numbers. Finally, the ROM strategies explored for fluid flow were extended to investigate the applicability to optimal flow control problems. The ROM of flow was used along with an optimization technique and adjoint method for gradient calculation to solve a control problem to reduce the drag force in flow past one or more cylinders. Results of the solution of this optimal control problem show that the developed ROMs are capable of solving complex optimization problems with significantly reduced computational expense.

Estimating flow fields with Reduced Order Models

Reduced-Order Model for Unsteady Compressible Flow Based on POD-Galerkin Projection

Greedy Nonintrusive Reduced Order Model for Fluid Dynamics

A Hybrid Reduced-Order Model Combing Deep Learning for Unsteady Flow

Fast Prediction of the Performance of the Centrifugal Pump Based on Reduced-Order Model

Multi‐fidelity Surrogate Reduced‐order Modeling of Steady Flow Estimation

Reduced-Order Modeling Toward Solving Inverse Problems in Solid Mechanics and Fluid Dynamics

Deep-learning-based reduced-order modeling for subsurface flow simulation

Reduced Order Model for Fast Computation of Incompressible Fluid Flow Problem

Manifold learning-based reduced-order model for full speed flow field

Fourier Collocation and Reduced Basis Methods for Fast Modeling of Compressible Flows

A Projection-Based Time-Segmented Reduced Order Model for Fluid-Structure Interactions

Predictive Reduced Order Modeling of Chaotic Multi-scale Problems Using Adaptively Sampled Projections

Residual-based Reduced Order Models for Parameterized Navier-Stokes Equations with Nonhomogeneous Boundary Condition

Adjacency-based, Non-intrusive Reduced-order Modeling for Fluid-Structure Interactions

Projection-based Reduced Order Modelling for Unsteady Parametrized Optimal Control Problems in 3D Cardiovascular Flows

A Non-Intrusive Reduced Order Model with Transformer Neural Network and Its Application

An adaptive, training-free reduced-order model for convection-dominated problems based on hybrid snapshots

A Reduced Order Model conditioned on monitoring features for estimation and uncertainty quantification in engineered systems

ADVANCES AND PROSPECTS OF THE REDUCED ORDER MODEL FOR UNSTEADY FLOW AND ITS APPLICATION

On Reduced-Order Modeling of Gas–solid Flows Using Deep Learning