Abstract:A novel Eulerian–Lagrangian approach based on the multi-phase particle-in-cell (MP-PIC) methodology was applied in the simulation of the hydrodynamic behavior of pressurized high-flux circulating fluidized beds (DHFCFBs) in this work. The sensitivities of key model (i.e. the drag model) and modeling parameters (particle–particle restitution coefficient, normal particle–wall restitution coefficient, and tangential particle–wall restitution coefficient) on the predictions have been tested systematically. Experimental results of Richtberg et al. [Powder Technol. 2005, 155(2), 145–152] and Yin et al. [Chem. Eng. Technol. 2012, 35(5), 904–910] were used as a numerical benchmark to assess the simulations quantitatively. The results show that the Gidaspow drag model displays better agreement with both the axial profiles of pressure drop and the radial distributions of particle volume fraction. Compared with the perfectly elastic particle collision (ep=1.0), the non-ideal particle–particle interaction could get more reasonable prediction results. The particle–wall restitution coefficient has somewhat of an effect on the simulated gas–solid flow behaviors in the risers. However, no critical changes of simulated flow characteristic in the trends of pressure drop and solid volume fraction distribution have been found. Based on the comparison of simulation results with experiments, a suitable model (i.e., Gidaspow drag model) and a group of modeling parameters, namely a particle–particle restitution coefficient (ep=0.9), a normal particle–wall restitution coefficient (ewn=0.1) and a free-slip boundary condition (i.e. the tangential particle–wall restitution coefficient, ewτ=1.0) for modeling the hydrodynamic behavior in the DHFCDB riser were determined and verified.

Predicting cold gas-solid flow in a pilot-scale dual-circulating fluidized bed: Validation of computational particle fluid dynamics model

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

CPFD study of volatile liquid injection in a dense gas–solid fluidized bed

Dynamic Characteristics of Solids Circulation Establishment in Laboratory and Industrial Circulating Fluidized Beds with Sweeping Bend Return

Effect of Bed Thickness on a Pseudo 2D Gas-Solid Fluidized Bed Turbulent Flow Structures and Dynamics

Modeling on the Hydrodynamics of Pressurized High-Flux Circulating Fluidized Beds (phfcfbs) by Eulerian–Lagrangian Approach

Improving Solid-Phase Fluidization Prediction in Circulating Fluidized Bed Risers: Drag Model Sensitivity and Turbulence Modeling

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

CPFD simulation of circulating fluidized bed risers

A computational fluid dynamics study on the flow field in a liquid–solid circulating fluidized bed riser

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Numerical Simulation of Particulate Flows in CFB Riser with Drag Corrections Based on Particle Distribution Characterization

Numerical Simulation and Experimental Study of the Gas–Solid Flow Behavior Inside a Full-Loop Circulating Fluidized Bed: Evaluation of Different Drag Models

Particle Size Distribution in Cpfd Modeling of Gas-Solid Flows in A Cfb Riser

Numerical Simulation of Gas-particle Hydrodynamics in CFB