Abstract:In order to analyze the electromagnetic characteristics of the Sen Transformer (ST) in the event of an inter-turn fault (ITF), an electromagnetic transient model of the ST with ITF based on reluctance is proposed in this paper. Firstly, the magnetic equivalent circuit model of the ST with ITF is established based on the magnetic coupling relationship among the internal windings of the ST with ITF. Secondly, the electrical analytical model for the current in each winding of the ST with ITF is derived from the electrical connection established the ST with ITF and the external system. Finally, the electromagnetic transient model of the ST with ITF can be obtained by combining the magnetic equivalent circuit model with the electrical analytical model. The J-A hysteresis model is employed for representing the saturation characteristics of the iron core and the hysteresis effects. Meanwhile, an energy method is used to calculate the leakage reluctance between the windings. Three case studies have been conducted with the assistance of MATLAB and ANSYS/Maxwell. The results of the analytical calculations are compared with the time-domain simulation to verify the validity of the model. Furthermore, the growth of the current in the fault phase is significant after an ITF occurs in the ST, while the growths of the currents in the non-fault phases are very small. Moreover, the effects of the number of fault turns and the fault location on the current in the ST with ITF are further analyzed.

Multi-Physics Reliability Modeling of High-Frequency Electromagnetic Transformers in Solid-State Transformer Systems

Simulation and Analysis of Electromagnetic Properties at the Secondary Port of Electronic Current Transformers Under Very Fast Transient Overvoltage

Research on Transient Electric Field Distribution of High-Frequency Transformers Based on COMSOL and SIMULINK Co-simulation

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

Multiphysics Digital Model of the High Frequency Transformer for Power Electronics Application Considering Electro-thermal Interactions

Modeling and Design of Insulation Structure for High Power Density Medium Voltage High-Frequency Transformers

Component-Level Thermo-Electromagnetic Nonlinear Transient Finite Element Modeling of Solid-State Transformer for DC Grid Studies

Broadband Equivalent Circuit Modeling for Medium Voltage High-Frequency Transformers with Multi-Shielding Structure

Dynamic Electromagnetic Force Analysis of a Power Transformer with Regulated Windings

High-voltage High-Frequency Transformer Design for a 7.2kv to 120V/240V 20kva Solid State Transformer

Electromagnetic-Thermal Coupled Simulation of a 10 Kw,10khz High-Frequency Transformer Considering the Dynamic Electromagnetic Parameters of Materials

Development of Multi-Domain Design Tool for Medium Voltage High Frequency Power Transformers

Thermal Network Modeling of High Frequency Insulated Core Transformers

Accelerated Electromagnetic Transient (EMT) Equivalent Model of Solid-State Transformer

An improved model of hot-spot temperature for oil-immersed transformers based on multi-parameter fusion

Piecewise Frequency-domain Modeling of Large Power Transformer Windings for Very Fast Transient Overvoltage Simulations

Magneto-thermal coupling simulation and experimental verification for a three-winding high-frequency transformer

Ultra-wide Band Modeling and Over-voltage Analysis of High Altitude Nuclear Electromagnetic Pulse on Transformer

A reluctance-based electromagnetic transient model for the Sen Transformer with inter-turn fault

Solid state transformer specification via feeder modeling and simulation

Thermal Modeling of a High-Voltage Fault-Tolerant Wind Generator with HTS Bulks