Abstract:The strength-ductility trade-off has been a longstanding dilemma in metallic materials. Here we report an innovative approach to achieve a high strength-ductility synergy via dual precipitation of sheared and bypassed precipitates. (Ni 2 Co 2 FeCr) 96-x Al 4 Nb x (at.%) alloys strengthened by nanoscale L1 2 particles and Laves precipitates were selected as a model for this study, and their precipitate microstructures and mechanical properties were thoroughly investigated. The dual-precipitation-strengthened alloys exhibit a yield strength of more than 1400 MPa, an ultimate tensile strength of over 1800 MPa, and a uniform elongation of 18%, thus achieving a high strength-ductility synergy. Our analysis reveals that the nanoscale L1 2 precipitates contribute to the strength via the particle shearing mechanism, whereas the Laves phase provides the strengthening through the Orowan bypass mechanism. The study of deformation microstructures shows that the L1 2 precipitates are sheared by stacking faults, which facilitates long-range dislocation gliding through the matrix. As a result, deformation induces the formation of hierarchical stacking fault networks and immobile Lomer-Cottrell locks, which effectively enhance the work hardening capability and plastic stability, thereby resulting in a high ductility at high strength levels. Dislocations are piled-up against the interface between the Laves precipitates and matrix, which increases the work hardening capability at the early stages of plastic deformation but causes stress concentrations. The dual precipitation strategy may be useful for many other alloys for achieving superior mechanical properties for technological applications. & COPY; 2023 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Synergistic work hardening by rapid multiplication of dislocations in a multi-principal-element alloy

Harnessing instability for work hardening in multi-principal element alloys

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Simultaneous enhancement of strength and ductility via microband formation and nanotwinning in an L12-strengthened alloy

Enhancing the strength-ductility trade-off in a NiCoCr-based medium-entropy alloy with the synergetic effect of ultra fine precipitates, stacking faults, dislocation locks and twins

Decipher multiple deformation mechanisms in a FeCrCoNi medium entropy alloy for sustained work hardening

Enhanced Strength-Ductility Synergy in a Novel V-containing γ''-strengthened CoCrNi-based Multi-Component Alloy

Abnormal strain-hardening in Co-rich CoNiV medium-entropy alloys

Excellent work hardening ability in a novel compositionally complex alloy by hierarchical microstructuring

Making a Coherent L12-nano-precipitates-reinforced Ni-based Alloy Ultrastrong and Ductile by Constructing Dual Heterogeneous Structures

V-stabilized γ′′ phase: a new pathway to enhanced intermediate-temperature ductility in NiCoCr-based multi-component alloys

Synergetic Enhancement of Strength and Ductility Via a Heterogeneous Structure with Short-Range Clustering: A Novel Ti-V-Zr Medium Entropy Alloy

Multiple deformation mechanisms induced by pre-twinning in CoCrFeNi high entropy alloy

Multi-scale annealing twins generate superior ductility in an additively manufactured high-strength medium entropy alloy

Effect of Coherent Nanoprecipitate on Strain Hardening of Al Alloys: Breaking through the Strength-Ductility Trade-Off

Synergistic enhancement of strength and ductility in Ni via gradient dislocation structures induced by cyclic torsional deformation

Achieving Excellent Strength-Ductility Balance in Single-Phase CoCrNiV Multi-Principal Element Alloy

Achieving ultrahigh strength and ductility in high-entropy alloys via dual precipitation

Strong and ductile CrCoNi medium-entropy alloy via dispersed heterostructure

Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy

Tensile behaviors and hetero-deformation-induced hardening mechanisms in medium entropy alloys with dual gradients of grain size and coherent nanoprecipitate