Abstract:The tripod foundation (TF) is a prevalent foundation configuration in contemporary engineering practices. In comparison to a single pile, TF comprised interconnected individual piles, resulting in enhanced bearing capacity and stability. A physical model test was conducted within a sandy soil foundation, systematically varying the length-to-diameter ratio of the TF. The investigation aimed to comprehend the impact of altering the height of the central bucket on the historical horizontal bearing capacity of the foundation in saturated sand. Additionally, the study scrutinized the historical consequences of soil pressure and pore water pressure surrounding the bucket throughout the loading process. The historical findings revealed a significant enhancement in the horizontal bearing capacity of the TF under undrained conditions. When subjected to a historical horizontal loading angle of 0° for a single pile, the multi-bucket foundation exhibited superior historical bearing capacity compared to a single-pile foundation experiencing a historical loading angle of 180° under pulling conditions. With each historical increment in bucket height from 150 mm to 350 mm in 100 mm intervals, the historical horizontal bearing capacity of the TF exhibited an approximately 75% increase relative to the 150 mm bucket height, indicating a proportional relationship. Importantly, the historical internal pore water pressure within the bucket foundation remained unaffected by drainage conditions during loading. Conversely, undrained conditions led to a historical elevation in pore water pressure at the lower side of the pressure bucket. Consequently, in practical engineering applications, the optimization of the historical bearing efficacy of the TF necessitated the historical closure of the valve atop the foundation to sustain internal negative pressure within the bucket. This historical measure served to augment the historical horizontal bearing capacity. Simultaneously, historical external loads, such as wind, waves, and currents, were directed towards any individual bucket within the TF for optimal historical performance.

Design method of geotechnical capacity for tripod suction bucket foundations in clay

An Investigation into the Lateral Loading Response of Shallow Bucket Foundations for Offshore Wind Turbines Through Centrifuge Modeling in Sand

The capacities of tripod bucket foundation under uniaxial and combined loading

Comparison of Monotonic and Cyclic Lateral Response Between Monopod and Tripod Bucket Foundations in Medium Dense Sand

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

Analysis and Design of Bearing Capacity of Suction Caisson Foundations of Offshore Wind Turbines

Long-term settlement of suction bucket foundations supporting offshore wind turbines in clay

Seismic response of tripod suction bucket foundation for offshore wind turbine in sands

The Anti-Overturning Response of Tripod Bucket Foundation for Offshore Wind Turbines

Exploring the bearing characteristics of suction bucket foundations in Offshore wind turbines: A comprehensive analysis of tensile and compressive behavior

Undrained Capacity of a Bucket Foundation with a Limited-Tension Interface for Offshore Wind Turbines

Sensitivity Analysis of Factors Affecting the Bearing Capacity of Suction Bucket Foundation in Soft Clay

Bearing capacity of the gravity tripod foundation under general loading in clay

Numerical Investigation on the Lateral Loading Behaviour of Tetrapod Piled Jacket Foundations in Medium Dense Sand

Influence of Length to Diameter Ratio of the Skirt on Horizontal Bearing Characteristics of Tripod Suction Jacket Foundation in Sandy Soil

Upper Bound Solution of the Resisting Moment Bearing Capacity of A Composite Bucket Shallow Foundation of An Offshore Wind Turbine in Sand

Numerical Simulation of Offshore Suction Bucket Foundation Pullout Characteristics under Undrained Conditions

Research on the calculation method of penetration resistance of bucket foundation for offshore wind turbines

Bearing capacity and deflection behaviors of large diameter monopile foundations in sand seabed

Seismic response of the composite bucket foundation supported offshore wind turbines under marine environmental loadings

Penetration Characteristics of Mono-Column Composite Bucket Foundation for Offshore Wind Turbines