Abstract:Purpose There is recent emphasis on designing new materials and alloys specifically for metal additive manufacturing (AM) processes, in contrast to AM of existing alloys that were developed for other traditional manufacturing methods involving considerably different physics. Process optimization to determine processing recipes for newly developed materials is expensive and time-consuming. The purpose of the current work is to use a systematic printability assessment framework developed by the co-authors to determine windows of processing parameters to print defect-free parts from a binary nickel-niobium alloy (NiNb5) using laser powder bed fusion (LPBF) metal AM. Design/methodology/approach The printability assessment framework integrates analytical thermal modeling, uncertainty quantification and experimental characterization to determine processing windows for NiNb5 in an accelerated fashion. Test coupons and mechanical test samples were fabricated on a ProX 200 commercial LPBF system. A series of density, microstructure and mechanical property characterization was conducted to validate the proposed framework. Findings Near fully-dense parts with more than 99% density were successfully printed using the proposed framework. Furthermore, the mechanical properties of as-printed parts showed low variability, good tensile strength of up to 662 MPa and tensile ductility 51% higher than what has been reported in the literature. Originality/value Although many literature studies investigate process optimization for metal AM, there is a lack of a systematic printability assessment framework to determine manufacturing process parameters for newly designed AM materials in an accelerated fashion. Moreover, the majority of existing process optimization approaches involve either time- and cost-intensive experimental campaigns or require the use of proprietary computational materials codes. Through the use of a readily accessible analytical thermal model coupled with statistical calibration and uncertainty quantification techniques, the proposed framework achieves both efficiency and accessibility to the user. Furthermore, this study demonstrates that following this framework results in printed parts with low degrees of variability in their mechanical properties.

Nitrogen alloyed austenitic Ni-free stainless steel for additive manufacturing

Manufacturing high nitrogen austenitic stainless steels by pressurized induction furnace

Austenitic Stainless Steel Powders with Increased Nitrogen Content for Laser Additive Manufacturing

Microstructure, mechanical and magnetic properties of a nickel-free austenitic stainless steel fabricated by hot powder forging

Ambient pressure fabrication of Ni-free high nitrogen austenitic stainless steel using laser powder bed fusion method

Nanoprecipitate Strengthened, Alumina Forming Austenitic Stainless Steels for Elevated Temperature Applications

Novel high nitrogen austenitic stainless steels: From high-throughput screening to experimental validation and properties relationship

Fabrication of Spherical Steel Powder with Superequilibrium Nitrogen Content for Laser Powder Bed Fusion Additive Manufacturing

A printability assessment framework for fabricating low variability nickel-niobium parts using laser powder bed fusion additive manufacturing

Powder bed fusion of high-Mn-N Ni-free austenitic stainless steel: achieving low porosity and high mechanical strength through process parameter selection

Effect of N2 content in shielding gas on formation quality and microstructure of high nitrogen austenitic stainless steel fabricated by wire and arc additive manufacturing

Additive Manufacturing of Nickel-Based Super Alloys for Aero Engine Applications

Tailoring material properties of duplex stainless steel by DED-LB/M and in situ alloying with elemental powders

Nitrogen Effects in Additively Manufactured Martensitic Stainless Steels: Conventional Thermal Processing and Comparison with Wrought

The Dispersion-Strengthening Effect of TiN Nanoparticles Evoked by Ex Situ Nitridation of Gas-Atomized, NiCu-Based Alloy 400 in Fluidized Bed Reactor for Laser Powder Bed Fusion

Establishing a process route for additive manufacturing of NiCu-based Alloy 400: an alignment of gas atomization, laser powder bed fusion, and design of experiments

Alloy Design for Additive Manufacturing: Early-Stage Oxidation of Nickel-Based Superalloys

Improving the Defect Tolerance of PBF‐LB/M Processed 316L Steel by Increasing the Nitrogen Content

Alloys-by-design: Application to new superalloys for additive manufacturing

Microstructures and mechanical properties of a modified 9Cr ferritic-martensitic steel in the as-built condition after additive manufacturing

System study of the formability, nitrogen behaviour and microstructure features of the CMT wire and arc additively manufactured high nitrogen Cr-Mn stainless steel