Abstract:Purpose Given the current challenges for improving the tribological behavior in automotive engines, which require lubricants that adapt to different operating conditions through replacement mechanisms to reduce friction and wear, this study aims to analyze the use of hexagonal boron nitride nanoparticles blended in the lubricating oil of a diesel engine. The target was to minimize frictional power losses and wear of cylinder liner surfaces to validate what was observed in laboratory and to confirm improvements in thermal efficiency. Design/methodology/approach Before the definition of the concentration to be used in a real engine environment, tests of sample dispersion were conducted using an ultrasound bath. The mixtures were added to storage bottles in concentrations of 0.1% and 0.5%, as observed in Figure 1. The samples were subsequently analyzed using the dynamic light scattering (DLS) technique. There was a reduction in the hydrodynamic size for the sample with 0.5% of hexagonal boron nitride (hBN), possibly due to sedimentation of the powder during the analysis, which supported this work to continue with the use of 0.1% concentration. Findings The behavior of hBN as nano additive in a real diesel engine was problematic when compared with laboratory environment, leading to impact in oil temperature. In addition, it was noticed a high amount of deposit formation at the top dead center (TDC) and mid-stroke (MC) and nonsignificative wear at MC and bottom dead center (BDC) of the cylinder, with unusual formation of products from antiwear additives known as zinc dialkyl-dithiophosphate at MC position with the use of hBN. For this reason, this work provides insights into how hBN nanoparticles may not contribute toward the improvement of tribological performance. Originality/value The findings of this work aimed to provide a better understanding of the impact of hBN nanoparticles used as additives in real engine environment in terms of performance and tribological impacts. The results of this work indicated that hBN as additive gave poor results in terms of performance and wear prevention. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-02-2024-0047/

Experimental study and analysis of lubricants dispersed with nano Cu and TiO2 in a four-stroke two wheeler

Enhancing the tribological properties of hydraulic oil-based nanolubricants using MWCNT-SiO2 hybrid nanoparticles

Tribology Performance of Silica Nanoparticles as Lubricant Additives in a Reciprocating Four-Stroke Engine Motorcycle

Effect of TiO2 nanoparticles on the tribological properties of lubricating oil: an experimental investigation

Experimental Study on Enhancement in the Tribological Behaviour of Military Grade Lubricant Using Titanium Dioxide Nanoadditives for Aerospace Applications

Enhanced tribological performance of transesterified corn oil biodiesel blends with CuO and TiO 2 nanoparticles: experimental analysis on wear and friction reduction using environment friendly lubricants

Tribological Analysis of a Hydrodynamic Journal Bearing under the Influence of Synthetic and Biolubricants

Performance Analysis of Experimentally Characterized Titanium Dioxide and Zinc Oxide Nano-Lubricated Journal Bearing Considering Thermal and Cavitation Effects

Optimization and performance characteristics of diesel engine using green fuel blends with nanoparticles additives

Comparison between multi-walled carbon nanotubes and titanium dioxide nanoparticles as additives on performance of turbine meter oil nano lubricant

Examining the role of hexagonal boron nitride nanoparticles as an additive in the lubricating oil and studying its application

Numerical investigation and experimental analysis of nanoparticles modified unique waste cooking oil biodiesel fueled C. I. Engine using single zone thermodynamic model for sustainable development

Improving the tribological characteristics of piston ring assembly in automotive engines using Al2O3 and TiO2 nanomaterials as nano-lubricant additives

The conjoint effect of lab-grown nano-graphene dispersant and omega-9 fatty acid surfactant on performance of CI engine

"Synthesis and characterization of TiO2 nanoparticles as brake fluid additives: Viscosity modulation and impact on rheological properties"

Performance evaluation of nano-graphene lubricating oil with high dispersion and low viscosity used in diesel engines

Experimental Study and Analysis of Lubricants Dispersed with Nanodiamond Particles on Diesel Engine

Experimental Investigation and Model Development of the Non-Newtonian Behavior of CuO-MWCNT-10w40 Hybrid Nano-Lubricant for Lubrication Purposes

Evaluation of cylinder liner surfaces from a heavy-duty diesel engine run in dynamometer bench test with hBN as nano additive in the lubricant

Study of the Tribological Properties of Nano Lubricating Oil Blends for Diesel Engines

Assessment of performance and emission characteristics of CI engine using tyre pyrolysis oil and biodiesel blends by nano additives: An experimental study