Abstract:Mineral building materials suffer from weathering processes such as salt efflorescence, freeze-thaw cycling, and microbial colonization. All of these processes are linked to water (liquid and vapor) in the pore space. The degree of damage following these processes is heavily influenced by pore space properties such as porosity, pore size distribution, and pore connectivity. X-ray computed micro-tomography (µCT) has proven to be a valuable tool to non-destructively investigate the pore space of stone samples in 3D. However, a trade-off between the resolution and field-of-view often impedes reliable conclusions on the material's properties. X-ray dark-field imaging (DFI) is based on the scattering of X-rays by sub-voxel-sized features, and as such, provides information on the sample complementary to that obtained using conventional µCT. In this manuscript, we apply X-ray dark-field tomography for the first time on four mineral building materials (quartzite, fired clay brick, fired clay roof tile, and carbonated mineral building material), and investigate which information the dark-field signal entails on the sub-resolution space of the sample. Dark-field tomography at multiple length scale sensitivities was performed at the TOMCAT beamline of the Swiss Light Source (Villigen, Switzerland) using a Talbot grating interferometer. The complementary information of the dark-field modality is most clear in the fired clay brick and roof tile; quartz grains that are almost indistinguishable in the conventional µCT scan are clearly visible in the dark-field owing to their low dark-field signal (homogenous sub-voxel structure), whereas the microporous bulk mass has a high dark-field signal. Large (resolved) pores on the other hand, which are clearly visible in the absorption dataset, are almost invisible in the dark-field modality because they are overprinted with dark-field signal originating from the bulk mass. The experiments also showed how the dark-field signal from a feature depends on the length scale sensitivity, which is set by moving the sample with respect to the grating interferometer.

Applications of X-ray Powder Diffraction Microstructural Analysis in Applied Clay Mineralogy

Application of powder X-ray diffraction in mineralogy and petrology

An Improved Quantification Method for Characterisation of Clay Microstructure Using SEM

X-Ray Diffraction Techniques for Mineral Characterization: A Review for Engineers of the Fundamentals, Applications, and Research Directions

Crystal Structures of Clay Minerals and their X-Ray Identification

A New Method for Clay Mineral Analysis and Its Application in Geology

MXenes vs. clays: emerging and traditional 2D layered nanoarchitectonics

Review on the effect of isomorphic replacement on the structure and application performance of typical clay minerals

Detection of Interlayered Illite/Smectite Clay Minerals with XRD, SEM Analyses and Reflectance Spectroscopy

X-Ray Diffraction: Instrumentation and Applications

An Approach to Paleoclimate-Reconstruction by Clay Minerals

The application of Micro-area X-ray diffractometry in the mineral area

Applications of Electron Crystallography

New Advances in the Application of Small-Angle X-ray Scattering

Exploration of the X-ray Dark-Field Signal in Mineral Building Materials

Challenges in Rietveld Refinement and Structure Visualization in Ceramics

The use of softer X-rays in the structure elucidation of microporous materials

Crystallography and Applications of Metallic Materials

Características generales, propiedades, yacimientos y aplicaciones de pirofilita. II. Yacimientos, aplicaciones y utilización como materia prima cerámica

Heavy Mineral Sands Mining and Downstream Processing: Value of Mineralogical Monitoring Using XRD