Abstract:Perovskite-type oxides are extensively studied as oxygen sorbents in pressure swing adsorption (PSA) for air separation at elevated temperatures. However, quantitative analysis of desorption kinetics and the basis of material optimization are rarely reached on a fixed bed. In this study, the effects of Al doping on the oxygen absorption/desorption behaviors of Sr0.72Ca0.28Fe1-xAlxO3-δ (SCFA, x = 0, 0.03, 0.05, 0.07, 0.1) were investigated by temperature programmed desorption (TPD) and fixed bed absorption/desorption experiments. The desorption kinetics were analyzed by a Geometrical contraction model. O2-TPD results show that Al doping reduces the total absorption amount of Sr0.72Ca0.28FeO3-δ (SCF). Through the peak-differentiation-imitating analysis, it was found that the SCFA series materials have three different oxygen desorption sites, and the desorption peak area and temperature corresponding to each site are different. CO2-TPD results reveal that Al doping improves the CO2 resistance of the perovskite oxides. Compared with SCF, Al doped materials show enhanced equilibrium oxygen absorption capacity at temperature higher than 550 °C. The oxygen desorption rates of SCFA series were calculated by fitting the desorption curves with Geometrical contraction model (R2). Both initial oxygen desorption concentration and oxygen desorption rate constants increase with temperature but decrease with the Al doping amount. The similar apparent activation energies of the desorption rate constant of the SCFA series reveal that the desorption mechanism not changes with Al doping. Ideal oxygen production rate, equaling to the multiplication of equilibrium oxygen absorption capacity and the desorption rate constant, is suggested to evaluate the performance of an oxygen sorbent. The x = 0.03 sample shows the highest ideal oxygen production rate among the SCFA series.

Enhancement of oxygen separation performance through Pr0.6Sr0.4FeO3- perovskite by modulation of oxygen vacancies

Tantalum stabilized SrCoO3-δ perovskite membrane for oxygen separation

Unraveling the Trade‐Off Between Oxygen Vacancy Concentration and Ordering of Perovskite Oxides for Efficient Lattice Oxygen Evolution

Advancing oxygen separation: insights from experimental and computational analysis of La0.7Ca0.3Co0.3Fe0.6M0.1O3−δ (M = Cu, Zn) oxygen transport membranes

Oxygen absorption/desorption behaviors of Sr0.72Ca0.28Fe1-xAlxO3-δ perovskite oxygen sorbents for air separation

Effect of A/B-site substitution on oxygen production performance of strontium cobalt based perovskites for CO2 capture application

Characteristics of SrCo1-xFexO3-δPerovskite Powders with Improved O2/CO2Production Performance for Oxyfuel Combustion

Systematic Study of Oxygen Evolution Activity and Stability on La1–xSrxFeO3−δ Perovskite Electrocatalysts in Alkaline Media

Simultaneously enhanced permeability and stability in Al doped Pr0.6Sr0.4FeO3- oxygen transport membrane for CO2 capture

Oxygen vacancy formation energies in Sr-doped complex perovskites: ab initio thermodynamic study

Porosity in Sr1−xCaxFeO3-δ oxygen carriers: The role of surface area and pretreatment on storage activity

High Cationic Dispersity Boosted Oxygen Reduction Reactivity in Multi-Element Doped Perovskites

Enhanced anodic catalytic performance in PrFeO3−δ of perovskite materials via Co-doping with Sr and VB subgroup metals (V, Nb, Ta)

Regulating Oxygen Vacancy Distribution in Perovskites via A-Site Cation Engineering for Water Oxidation

Tailoring Ion Ordering in Perovskite Oxide for High‐Temperature Oxygen Evolution Reaction

Oxygen sorption/desorption kinetics of SrCo 0.8 Fe 0.2 O 3−δ perovskite adsorbent for high temperature air separation

The method of introducing oxygen vacancy into La0.8Sr0.2FeO3-based catalyst: enhancing the ORR and OER performance

High performance oxygen permeation membrane: Sr and Ti co-doped BaFeO3-δ ceramics

Perovskite Oxide Pr<sub>0.5</sub>Sr<sub>0.5</sub>Co<sub>0.8</sub>Fe<sub>0.2</sub>O<sub>3−δ</sub> as an Efficient Catalyst for Oxygen Evolution Reaction in Alkaline Media

Improved Chemical and Electrochemical Stability of Perovskite Oxides with Less Reducible Cations at the Surface.

Boosting the oxygen evolution reaction through migrating active sites from the bulk to surface of perovskite oxides