Abstract:In preparation for the forthcoming High-Luminosity phase of the Large Hadron Collider, the ATLAS experiment is working on major upgrades to its detector systems to effectively accommodate the increase in radiation levels and track density. The foremost among these upgrades entails the replacement of the current inner tracking detector with an advanced all-silicon Inner Tracker (ITk). In the outer region of the ITk apparatus is the Strip Detector. Central to the new strip tracking system are the ITk Strip modules, comprising silicon sensors and hybrid Printed Circuit Boards housing the integral read-out Application-Specific Integrated Circuits (ASICs) as well as power distribution services. Thorough characterisation of the electrical characteristics of the silicon strip modules at various stages of the assembly procedure holds paramount significance in evaluating module performance. This rigorous evaluation ensures timely identification of any anomalies, thereby enabling proactive remedial measures. Notably, during the course of these electrical assessments, certain modules manifested breakdown phenomena occurring below the prescribed threshold of 500 V, mandated by the ITk Quality Control protocols. Based on these observations, controlled exposure to low levels of radiation was suspected to elevate the breakdown voltage in susceptible sensors. This contribution presents results from two irradiation campaigns to investigate potentially beneficial effects of irradiation. One study investigates the effects of gamma irradiation on modules showing an early breakdown after gluing. For this study, modules were exposed to an ionising dose of 11 krad (corresponding to the dose accumulated after several days of operation in the HL-LHC) utilising a 60 Co source. The second campaign focuses on silicon sensor test structures with low breakdown voltage due to intentionally caused mechanical defects and their development after exposure to reactor neutrons. In both cases, preliminary findings suggest a discernible improvement in the breakdown voltage.

In situ detection of RF breakdown on microfabricated surface ion traps

Draft of PRSTAB paper ELECTRICAL BREAKDOWN OF METALLIC SURFACES

Observation of Temporal Evolution Following Laser Triggered Rf Breakdown in Vacuum

Fault Localization in a Microfabricated Surface Ion Trap using Diamond Nitrogen-Vacancy Center Magnetometry

Investigation Of Breakdown Induced Surface Damage On 805 Mhz Pillbox Cavity Interior Surfaces

Multi-junction surface ion trap for quantum computing

Probing surface electric field noise with a single ion

Functional surface ion traps on a 12-inch glass wafer for quantum applications

AC Zeeman effect in microfabricated surface traps

Characterization of ion-trap-induced ac-magnetic fields

Trap-integrated superconducting nanowire single-photon detectors with improved rf tolerance for trapped-ion qubit state readout

Laser Triggered RF Breakdown Study Using an S-band Photocathode Gun

rf Breakdown with and without External Magnetic Fields

Measurements of trapped-ion heating rates with exchangeable surfaces in close proximity

(k,m)-Catalan Numbers and Hook Length Polynomials for Plane Trees

Microfabricated Ion Traps

Spectroscopic measurements and models of energy deposition in the substrate of quantum circuits by natural ionizing radiation

Curing early breakdown in silicon strip sensors with radiation

The Interactions of Surface Damage on RF Cavity Operation

Mitigating the Effects of Au-Al Intermetallic Compounds Due to High-Temperature Processing of Surface Electrode Ion Traps

Electric-field noise from thermally-activated fluctuators in a surface ion trap