Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

High-Power Ferro-Electric Fast Reactive Tuner

Conceptual design of a high reactive-power ferroelectric fast reactive tuner

High-Power Fast-Response Ferrite Tuner for Icrf Impedance Matching in East

Temporally-controlled Switchable Microwave Rasorbers

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

Design and test of the fast ferrite tuner for icrf heating in east

Tunable Biasing Magnetic Field Design of Ferrite Tuner for ICRF Heating System in EAST

The Upgrade of Fast Ferrite Tuning Matching System for ICRF in EAST

Design and test of frequency tuner for CAEP high power THz free-electron laser

Magnetic Tuning of Electrically Resonant Metamaterial with Inclusion of Ferrite

Design and Test of Frequency Tuner for a CAEP High Power THz Free-Electron Laser

A Fast Tuning Method for a RFQ Accelerator with Ramped Inter-Vane Voltage

Tuner Design and Rf Test of A Four-Rod Rfq

Study Of The Hf Electronically Tunable Power Filter

A Novel Electromagnetic Coupling Reactor Based Passive Power Filter with Dynamic Tunable Function

PWM Power Supply for ICRF Ferrite Tuner in EAST

Pre-Stub Tuner for Reduction of Radio-Frequency Voltage along Transmission Line in EAST-ICRF System

A Theoretical Study on a Novel Performance-Tunable Electromagnetic Band-Gap—2-D Ferrite EBG

Experimental Analysis of A New Retarding Field Energy Analyzer

A novel method for Lorentz force detuning compensation in multi-cell superconducting RF cavity and its validation at room temperature

Permanent Magnetic Ferrite Based Power-Tunable Metamaterials