Abstract:Through a technology transfer program CERN is involved in the R&D of a compact superconducting cyclotron for future clinical radioisotope production, a project led by the Spanish research institute CIEMAT. For the remote cooling of the LTc superconducting magnet operating at 4.5 K, CERN has designed a small scale refrigeration system, the Cryogenic Supply System (CSS). This refrigeration system consists of a commercial two-stage 1.5 W @ 4.2 K GM cryocooler and a separate forced flow circuit. The forced flow circuit extracts the cooling power of the first and the second stage cold tips, respectively. Both units are installed in a common vacuum vessel and, at the final configuration, a low loss transfer line will provide the link to the magnet cryostat for the cooling of the thermal shield with helium at 40 K and the two superconducting coils with two-phase helium at 4.5 K. Currently the CSS is in the testing phase at CERN in stand-alone mode without the magnet and the transfer line. We have added a "validation unit" housed in the vacuum vessel of the CSS representing the thermo-hydraulic part of the cyclotron magnet. It is equipped with electrical heaters which allow the simulation of the thermal loads of the magnet cryostat. A cooling power of 1.4 W at 4.5 K and 25 W at the thermal shield temperature level has been measured. The data produced confirm the design principle of the CSS which could be validated.

First magnet operation on the cryogenic test stand Gersemi at FREIA

First cold test of a crab cavity at the GERSEMI cryostat for the HL-LHC project

Cryogenic and safety design of the future high field cable test facility at Fermilab

Cryogenic Test Stand for Characterization of Magnetocaloric Materials

Powering Tests Results of the First Batch of MCBXFB Magnets Produced in Industry

DESIGN OF A NEW HORIZONTAL TEST CRYOSTAT FOR SCRF CAVITIES AT THE UPPSALA UNIVERSITY

A small scale remote cooling system for a superconducting cyclotron magnet

Development and Operation of a Pr2Fe14B Based Cryogenic Permanent Magnet Undulator for a High Spatial Resolution X-ray Beamline

Quench Performance of the First Pre-series AUP Cryo-assembly

First tests of a 800 kJ HTS SMES

Commissioning, Performance, and Effect of the Quench Current-boosting Device on a Dedicated Superconducting Magnet

The 5.8 T Cryogen-Free Gyrotron Superconducting Magnet System on HL-2A

Design and Test of a Simplified and Reliable Cryogenic System for High Speed Superconducting Generator Applications

Measurement and Analysis of the Dynamic Effects in an HTS Dipole Magnet

Magnetic Measurements of HL-LHC AUP Cryo-Assemblies at Fermilab

Semi-Dry Cooling Solutions for Future Superconducting Accelerator Structures

Fermilab SRF cryomodule operational experience

Status of the Top Plate and Anticryostat for High Field Cable Test Facility at Fermilab

Thermal analysis of a 3 T cryogen-free superconducting magnet for electromagnetic property measurement system

The Superconducting Magnet for ADS Injection-I