Abstract:Hybrid photonic-plasmonic cavities have emerged as a new platform to increase light-matter interaction capable to enhance the Purcell factor in a singular way not attainable with either photonic or plasmonic cavities separately. In the hybrid cavities proposed so far, mainly consisting of metallic bow-tie antennas, the plasmonic gap sizes defined by lithography in a repeatable way are limited to minimum values \approx 10 nm. Nanoparticle-on-a-mirror (NPoM) cavities are far superior to achieve the smallest possible mode volumes, as gaps smaller than 1 nm can be created. Here, we design a hybrid cavity that combines a NPoM plasmonic cavity and a dielectric-nanobeam photonic crystal cavity operating at transverse-magnetic (TM) polarization. The metallic nanoparticle can be placed very close (< 1 nm) to the upper surface of the dielectric cavity, which acts as a low-reflectivity mirror. We demonstrate through numerical calculations that this kind of hybrid plasmonic-photonic cavity architecture exhibits quality factors, Q, above 10^{3} and normalized mode volumes, V , down to 10^{\num{-3}}, thus resulting in high Purcell factors (FP \approx 10^5), whilst being experimentally feasible with current technology. Our results suggest that hybrid cavities with sub-nm gaps should open new avenues for boosting light-matter interaction in nanophotonic systems.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to increase the intensity of the interaction between light and matter, especially in nanophotonic systems. Specifically, the authors designed a new type of hybrid photonic - plasmonic cavities, which combines the nanoparticle - on - a - mirror (NPoM) plasmonic cavity and the dielectric nanobeam photonic crystal cavity. This design aims to overcome the limitations when using photonic or plasmonic cavities alone. For example, although the photonic cavity has a high Q - value, its mode volume is limited by the diffraction limit, while the plasmonic cavity can achieve sub - wavelength spatial confinement but has a low Q - value. By placing the metal nanoparticles near (<1 nm) the upper surface of the dielectric cavity, the authors demonstrated that this hybrid structure can achieve an extremely small mode volume (the normalized mode volume \(V\) drops to \(10^{-3}\)) while maintaining a relatively high Q - value, thereby significantly increasing the Purcell factor (\(F_P \approx 10^5\)). In addition, this study also explored the influence of metal nanoparticles of different shapes (such as nanocubes and nano - ellipsoids) on the performance of the hybrid cavity, proving the universality and flexibility of this design. ### Main problems - **Enhancing the interaction between light and matter**: By designing a new hybrid photonic - plasmonic cavity to achieve a high Purcell factor and enhance the interaction between light and matter. - **Overcoming the limitations of a single cavity**: The mode volume of the photonic cavity is limited by the diffraction limit, and the Q - value of the plasmonic cavity is low. The hybrid cavity combines the advantages of both to achieve a high Q - value and a small mode volume. - **Experimental feasibility**: Ensure that the designed hybrid cavity can be realized under the existing technical conditions. ### Solutions - **Designing a new type of hybrid cavity**: Combine the NPoM plasmonic cavity and the dielectric nanobeam photonic crystal cavity, and utilize the strong coupling effect between the metal nanoparticles and the dielectric cavity. - **Numerical simulation**: Verify the performance of the hybrid cavity through numerical calculations, demonstrating its high Q - value and small mode volume. - **Material selection**: Select materials with a high refractive index and transparency in the visible and near - infrared ranges (such as gallium phosphide) to achieve the required optical properties. ### Key results - **High Purcell factor**: The Purcell factor of the hybrid cavity reaches \(10^5\), much higher than the performance when using photonic or plasmonic cavities alone. - **Small mode volume**: The normalized mode volume \(V\) can be reduced to \(10^{-3}\), achieving extreme spatial confinement. - **Experimental feasibility**: The designed hybrid cavity can be realized by the existing nanofabrication techniques. ### Conclusion This study proposes a new type of hybrid photonic - plasmonic cavity design, which can significantly enhance the interaction between light and matter and provide new possibilities for the applications of nanophotonic systems.

Hybrid Photonic-Plasmonic Cavities based on the Nanoparticle-on-a-Mirror Configuration

Hybrid Photon-Plasmon Nanowire Lasers

An Improved Surface-Plasmonic Nanobeam Cavity for Higher Q and Smaller V

Nanoantenna-Microcavity Hybrids with Highly Cooperative Plasmonic-Photonic Coupling

Hybrid Plasmonic-Photonic Microcavity for Enhanced Light-Matter Interaction

Full Control of Plasmonic Nanocavities Using Gold Decahedra-on-Mirror Constructs with Monodisperse Facets

Ultrasmall-V High-Q Photonic Crystal Nanobeam Microcavities Based on Slot and Hollow-Core Waveguides

Direct Coupling of Plasmonic and Photonic Nanowires for Hybrid Nanophotonic Components and Circuits.

Hybrid Photonic-Plasmonic Nano-Cavity with Ultra-High Q/V.

Nanoparticle-on-mirror Cavity Modes for Huge And/or Tunable Plasmonic Field Enhancement

High-Q surface-plasmon-polariton whispering-gallery microcavity

High Q/V Hybrid Plasmonic Photonic Crystal Nanobeam Cavity: Towards Low Threshold Nanolasers Application

Polarization-Insensitive Integration of Nanoparticle-on-a-Slit Cavities with Dielectric Waveguides for On-chip Surface Enhanced Raman Spectroscopy

A Hybrid Photonic-Plasmonic Cavity Design for Optical Force Enhancement

Strongly enhanced light-matter interaction in a hybrid photonic-plasmonic resonator

Scalable construction of hybrid quantum photonic cavities

Plasmonic reflectors and high-Q nano-cavities based on coupled metal-insulator-metal waveguides

Multi-faceted plasmonic nanocavities

Hybridization-induced resonances with high quality factor in a plasmonic concentric ring-disk nanocavity

A High-Quality Factor Hybrid Plasmonic Nanocavity Based on Distributed Bragg Reflectors*

Design of High-Q-Gradient Dielectric Nanoparticle Chain Surface Plasmonic Cavities