Abstract:Introduction: Bottom ashes (BA) from municipal solid waste incinerators (MSWIs) are currently classified by the European Waste Catalogue as industrial non-hazardous waste. To promote their reuse, identification and characterization of the heavy metal-bearing phases (both glass and minerals), as well as their weathering behavior, must be addressed for what concern the chemical composition, mineralogical phases, and in high concentrations and pollutants' mobility. An important point to be noted is whether the results from a given plant can be generalized. Materials and methods: In this work, BA from five waste-to-energy (WtE) plants in northern Italy were sorted based on different grain sizes. The area showed similar MSW production, collected from a culturally homogeneous area, and similar collection management. For each grain size, a mineralogical, chemical, and physical characterization was carried out using XRF, XRD, TGA, and the leaching test. Results and discussion: We found that for major elements, the average chemical composition of the incinerators is similar, with some differences in minor elements. Ferrara (FE) and Forlì-Cesena (FC) BA show portlandite, higher ettringite, and less amorphous than the Torino (TO), Parma (PR), and Piacenza (PC) BA. This affects the pH, the release, and toxicity of the leachates. In FE and FC ashes, ettringite is insoluble, and we not only have low sulfate but also Ni and Ba beyond reglementary limits, suggesting that Ni and Ba are present as hydroxides with portlandite, which are soluble. In TO, PR, and PC, Cr and sulfates are beyond limits, suggesting that Cr comes from dissolution in ettringite. Cu and Cl are always beyond limits; the dissolution of chlorides accounts for only 30%–35% of the global Cl leachate. We observe that in the assessment of the potential toxicity of the ashes, mineralogy has a higher effect than the bulk chemical composition. Grain size sorting, although useful together with other techniques, is not by itself able to comply with the PTE risk level. Conclusion: The findings contribute to the development of efficient treatment strategies for BA, highlighting the need for a more thorough investigation to understand composition and properties and to find innovative ways to reuse, promoting the circular economy and sustainable waste management practices.

Effect of leaching behaviour by quenching of bottom ash from MSW incineration

Grain size and mineralogical constraints on leaching in the bottom ashes from municipal solid waste incineration: a comparison of five plants in northern Italy

Leaching behaviour of incineration bottom ash in a reuse scenario: 12years-field data vs. lab test results

Content, Mobility and Transfer Behavior of Heavy Metals in Mswi Bottom Ash in Zhejiang Province, China

Mechanism of Na2O/CaO Ratio Affecting Ash Fusing Characteristics During Ash Deposition and Slagging in Municipal Solid Waste Incinerator

Reuse potential of municipal solid waste incinerator bottom ash as secondary aggregate: Material characteristics, persistent organic pollutant content and effects of pH and selected environmental lixiviants on leaching behaviour

Impacts of wet treatment on leaching toxicity of municipal solid waste incineration bottom ash

Leaching behavior of heavy metals and PAHs from MSWI bottom ash in a long-term static immersing experiment.

Leaching of Heavy Metals from MSWI Fly Ash: Experiments Vs. Simulation

Effect of alkaline washing treatment on leaching behavior of municipal solid waste incineration bottom ash

Retention and Leaching of Nitrite by Municipal Solid Waste Incinerator Bottom Ash under the Landfill Circumstance.

Impact and recoverability of metals from waste: a case study on bottom ash from municipal solid waste incineration plants

Physiochemical properties, heavy metal leaching characteristics and reutilization evaluations of solid ashes from municipal solid waste incinerator plants

Study on the Leachability of Heavy Metals and Polycyclic Aromatic Hydrocarbons from MSW Incineration Bottom ash

Hydrological and geochemical properties of bottom ash landfills

Investigation of Cu Leaching from Municipal Solid Waste Incinerator Bottom Ash with a Comprehensive Approach

Leaching characteristics of heavy metals in MSW and bottom ash co-disposal landfills

Chloride extraction for quality improvement of municipal solid waste incinerator ash for the concrete industry

Effect of Weathering Treatment on the Fractionation and Leaching Behavior of Copper in Municipal Solid Waste Incinerator Bottom Ash

Effect of Leachate Recirculation on the Migration of Copper and Zinc in Municipal Solid Waste and Municipal Solid Waste Incineration Bottom Ash Co-Disposed Landfill

Distributions of trace elements within MSWI bottom and combined ash components: Implications for reuse practices