Abstract:With the emergence of autonomous functions in road vehicles, there has been increased use of Advanced Driver Assistance Systems comprising various sensors to perform automated tasks. Light Detection and Ranging (LiDAR) is one of the most important types of optical sensor, detecting the positions of obstacles by representing them as clusters of points in three-dimensional space. LiDAR performance degrades significantly when a vehicle is driving in the rain as raindrops adhere to the outer surface of the sensor assembly. Performance degradation behaviors include missing points and reduced reflectivity of the points. It was found that the extent of degradation is highly dependent on the interface material properties. This subsequently affects the shapes of the adherent droplets, causing different perturbations to the optical rays. A fundamental investigation is performed on the protective polycarbonate cover of a LiDAR assembly coated with four classes of material—hydrophilic, almost-hydrophobic, hydrophobic, and superhydrophobic. Water droplets are controllably dispensed onto the cover to quantify the signal alteration due to the different droplets of various sizes and shapes. To further understand the effects of droplet motion on LiDAR signals, sliding droplet conditions are simulated using numerical analysis. The results are validated with physical optical tests, using a 905 nm laser source and receiver to mimic the LiDAR detection mechanism. Comprehensive explanations of LiDAR performance degradation in rain are presented from both material and optical perspectives. These can aid component selection and the development of signal-enhancing strategies for the integration of LiDARs into vehicle designs to minimize the impact of rain.

Modelling of LIDAR sensor disturbances by solid airborne particles

Pattern Recognition Model for Aerosol Classification with Atmospheric Backscatter Lidars: Principles and Simulations

Simulating Road Spray Effects in Automotive Lidar Sensor Models

Modeling of Motion Distortion Effect of Scanning LiDAR Sensors for Simulation-Based Testing

Modelling and validation of LiDAR noise distribution in fog and rain

Measuring the Influence of Environmental Conditions on Automotive Lidar Sensors

Investigation of Automotive LiDAR Vision in Rain from Material and Optical Perspectives

Lidar Light Scattering Augmentation (LISA): Physics-based Simulation of Adverse Weather Conditions for 3D Object Detection

Performance Modeling a Near-Infrared ToF LiDAR Under Fog: A Data-Driven Approach

Laser and LIDAR in a System for Visibility Distance Estimation in Fog Conditions

Learning to Simulate Realistic LiDARs

Assessing the Robustness of LiDAR, Radar and Depth Cameras Against Ill-Reflecting Surfaces in Autonomous Vehicles: An Experimental Study

Air Pollution and Fog Detection through Vehicular Sensors

Real-Time Truly-Coupled Lidar-Inertial Motion Correction and Spatiotemporal Dynamic Object Detection

Real-time simulating and rendering of layered dust

Algorithm for Point Cloud Dust Filtering of LiDAR for Autonomous Vehicles in Mining Area

Data Augmentation of Automotive LIDAR Point Clouds under Adverse Weather Situations

Learn to Model and Filter Point Cloud Noise for a Near-Infrared ToF LiDAR in Adverse Weather

LiDAR Point Cloud Image Modeling and Quality Testing Method

Impact of Multi-Scattered LiDAR Returns in Fog

Effect of Fog Particle Size Distribution on 3D Object Detection Under Adverse Weather Conditions