Abstract:The process of solid deposition from wax–solvent mixtures was compared with that of ice deposition from liquid water by means of experiments using a cold-finger apparatus and a transient mathematical model based on the Stefan "moving boundary problem" formulation. Two agitation speeds of 250 rev min–1 (Reynolds number of 4100) and 500 rev min–1 (Reynolds number of 8200), with two coolant temperatures of Tf – 4 °C and Tf – 7 °C, at four water temperatures (from Tf + 3 °C to Tf + 0.7 °C), and for 11 deposition times between 30 s and 8 h, were used in the ice-deposition experiments. The wax-deposition experiments were undertaken using a 10 mass % wax–solvent multicomponent mixture, at an agitation speed of 250 rev min–1 (Reynolds number of 1400), with a constant coolant temperature of wax appearance temperature (WAT) – 12 °C, at four mixture temperatures (from WAT + 6 °C to WAT), and for 17 deposition times ranging from 2 s to 48 h. Both the ice-deposition and the wax-deposition processes were remarkably similar. Both of these phase-change systems were extremely rapid during the first few minutes. A higher deposit mass was achieved by lowering the liquid water temperature, the coolant temperature, and the agitation speed. The experimental results from this investigation, supported by those from previous studies, indicated that a higher deposit mass is achieved with lowering of the liquid mixture temperature, the coolant temperature, and the agitation speed. The results of both sets of experiments were consistent with predictions from the Stefan moving boundary problem framework, which considers both of these phase-change processes to be governed only by the heat-transfer steps involved in the freezing of a liquid. This study confirms that the solid deposition from wax–solvent mixtures is described adequately based entirely on heat-transfer considerations.

The Development of a Wax Layer on the Interior Wall of a Circular Pipe Transporting Heated Oil -- The Effects of Temperature Dependent Wax Conductivity

Modelling Ice and Wax Formation in a Pipeline in the Arctic Environment

Validating Heat-Transfer-Based Modeling Approach for Wax Deposition from Paraffinic Mixtures: An Analogy with Ice Deposition

Establishment and Application of Heat Flow Coupling Model

Three-Dimensional CFD Modeling on the Thermal Characteristics of Buried Oil Pipeline Involving the Heat Transfer of Wax Layer

A novel two-dimensional continuum mixture theory model for paraffin wax melting in a cavity heating from side considering volume change

Modeling multicomponent wax deposition and aging on cold surfaces with application to pipeline fouling

Experimental Study on Wax Deposition in Model Loop

Thermal Testing of Wax Layer Thickness in Crude Oil Pipeline

Experimental study on wax deposition of highly paraffinic oil in intermittent gas-oil flow in pipelines

Wax deposition modeling in oil-water stratified pipe flow

EXPERIMENTAL AND NUMERICAL STUDY ON MELTING PROCESS OF PARAFFIN IN A VERTICAL ANNULAR CYLINDER

Numerical simulation of paraffin melting in circular tube using LBM

Numerical Study for Removing Wax Deposition by Thermal Washing for the Waxy Crude Oil Gathering Pipeline.

Molecular dynamics simulation of deposition of high waxy crude oil on different pipeline walls

Experimental Investigation Of Wax Deposition At Different Deposit Locations Through A Detachable Flow Loop Apparatus

Numerical Simulation of Paraffin Melting in Circular Tube Using Lattice Boltzmann Method

Experimental Study of Paraffin Melting in Cylindrical Cavity with Central Electric Heating Rod.

Progress and Perspectives of Wax Deposition in Oil-Gas Systems: A Review

Investigation of wax deposition and effective diffusion coefficient in water-in-oil emulsion system

Forced convective heat transfer for laminar flow of paraffin: A numerical and experimental study