Abstract:One of the main concerns in the design of low emittance linear accelerators (linacs) is the preservation of beam emittance. Here we discuss one possible source of emittance dilution, the coupler kick, due to transverse electromagnetic fields in the accelerating cavities of the linac caused by the power coupler geometry. In addition to emittance growth, the coupler kick also produces orbit distortions. It is common wisdom that emittance growth from coupler kicks can be strongly reduced by using two couplers per cavity mounted opposite each other or by having the couplers of successive cavities alternation from above to below the beam pipe so as to cancel each individual kick. We therefore analyze consequences of alternate coupler placements. We show here that for sufficiently large Q values, alternating the coupler location from before to after the cavity leads to a cancellation of the orbit distortion but not of the emittance growth, whereas alternating the coupler location from before and above to behind and below the cavity cancels the emittance growth but not the orbit distortion. These compensations hold even when each cavity is individually detuned, e.g. by microphonics. Another effective method for reducing coupler kicks that is studied is the optimization of the phase of the coupler kick. This technique is independent of the coupler geometry but relies on operating on crest. A final technique studied is symmetrization of the cavity geometry in the coupler region with the addition of a stub opposite the coupler, which reduces the amplitude of the off axis fields and is thus effective for off crest acceleration as well. We show applications of these techniques to the energy recovery linac (ERL) planned at Cornell University.

The beam exchange of a circular cooler ring with a ultrafast harmonic kicker

Design and Characterization of a Kicker for the Tsinghua Thomson Scattering Storage Ring

A Novel Non-Linear Strip-Line Kicker Driven by Fast Pulser in Common Mode

A 300 mm Long Prototype Strip-Line Kicker for the Heps Injection System

Design Study of a Fast Kicker Magnet Applied to the Beamline of a Proton Therapy Facility

Beam Injection Using a Nonlinear Kicker for the HLS-II Storage Ring

Development of a stripline kicker for the Hefei Advanced Light Facility

A Waveguide Overloaded Cavity Kicker for the HLS II Longitudinal Feedback System

Development of A Longitudinal Feedback Cavity for the Beam Feedback System

Design and Optimization of a Longitudinal Feedback Kicker Cavity for the HLS-II Storage Ring

Nonlinear kicker design and research for Hefei advanced light facility

An Innovative Transverse Emittance Cooling Technique using a Laser-Plasma Wiggler

Design Considerations of a Fast Kicker System Applied in a Proton Therapy Beamline

A Novel Kind of Nonlinear Kicker for the Hefei Advanced Light Facility

Optimization Design of a Longitudinal Kicker for a Beam Feedback System

Storage-ring Electron Cooler for Relativistic Ion Beams

Development of a High-repetition-rate Lumped-inductance Kicker Magnet Prototype for the Beam Switchyard of SHINE

Design and Simulation of the Transverse Feedback Kicker for the HLS II

Physical and Structural Design of Fast Extraction Kickers for CSNS/RCS

Transverse emittance dilution due to coupler kicks in linear accelerators

Study of a 560-mm-long stripline kicker for HIT 10 MeV electron accelerator