Abstract:In this contribution, Automat FOR Simulation of HETero-structures v2.5 software was used for unveiling the photovoltaic performance and thermal stability of relatively less explored TiO 2 /c-Si heterojunction solar cell architecture based on 110 μm wafers. Firstly, the dependence of the photovoltaic performance on the emitter layer, i.e. the TiO 2 layer, was explored by varying its different characteristics: thickness, carrier concentration and the defect density at the TiO 2 /Si interface. The study revealed that the power conversion efficiency might be as high as 16.34% (even without any interfacial passivation layer) even when the thickness of the wafer was kept at 110 μm; the thickness and the doping concentration of the TiO 2 emitter layer were kept as 7 nm and 1 × 10 20 cm −3 ; respectively. The corresponding defect density at the TiO 2 /p-Si interface was 1 × 10 12 cm −2 . Furthermore, a significant gain in the power output was realized by embedding either poly-silicon on oxide or carrier selective contact layer at the rear side of the device architecture. In the case of the incorporation of poly-silicon on the oxide structure at the rear side of the metal/c-Si interface, the role of the ultra-thin tunnel oxide thickness on the device's performance was explored in detail. Next, the poly-silicon on oxide structure was replaced by the NiO x layer, an efficient hole transport layer at the rear side of the device architecture. Various performance-affecting parameters, such as NiO x thickness, NiO x band gap, and the defect density at the NiO x /Si interface, were varied at different carrier concentrations of the NiO x layer to obtain the best possible conditions for realizing the maximum power output. The study was further extended to examine the influence of the wafer lifetime on the device performance of all the simulated solar cells. Eventually, the device temperature was varied from 275 to 375 K with an interval of 25 K to investigate the thermal stability of the proposed cell architectures so that the best possible architecture could be selected for practical fabrication both in terms of photovoltaic performance and thermal stability.

Material and Process Tolerant High Efficiency Solar Cells with Dynamic Recovery of Performance

Toward high-efficiency solution-processed tandem solar cells

Thermal Radiation Annealing for Overcoming Processing Temperature Limitation of Flexible Perovskite Solar Cells

Prospects for Perovskite/Silicon tandem solar cells to outperform c-Silicon solar cells at elevated temperatures

Thermally Stable All‐Perovskite Tandem Solar Cells Fully Using Metal Oxide Charge Transport Layers and Tunnel Junction

Analysis of Advanced TiO2/Si based Solar Cell Architecture: Improving PV Parameters and Thermal Stability

Efficient and Stable Solution-Processed Planar Perovskite Solar Cells Via Contact Passivation

Dynamic Passivation of Perovskite Films via Gradual Additive Release for Enhanced Solar Cell Efficiency

Surface Reconstruction for Efficient and Stable Monolithic Perovskite/Silicon Tandem Solar Cells with Greatly Suppressed Residual Strain

Thermal and Power Performance Optimization of Cost-Effective Solar Cells using Eco-Friendly Perovskite Materials

Cost-Effective Fabrication of c-Si Solar Cell Using Transition Metal Oxides Interfaces

Submicron Organic–Inorganic Hybrid Radiative Cooling Coatings for Stable, Ultrathin, and Lightweight Solar Cells

Performance enhancement of a proposed solar cell microstructure based on heavily doped silicon wafers

Active area cell efficiency (19%) monocrystalline silicon solar cell fabrication using low-cost processing with small footprint laboratory tools

Improving Heat Transfer Enables Durable Perovskite Solar Cells

Diffusion Engineering of Ions and Charge Carriers for Stable Efficient Perovskite Solar Cells

Large-Area 23%-Efficient Monolithic Perovskite/Homojunction-Silicon Tandem Solar Cell with Enhanced UV Stability Using Down-Shifting Material

Efficient and Highly Stable Lateral Perovskite Single‐Crystal Solar Cells through Crystal Engineering and Weak Ion Migration

Tuning Recombination and Charge Separation in a n/p/p Heterojunction Solar Cell with CZTS, Ag3SbS3 and a Carbon Interlayer

A pressure process for efficient and stable perovskite solar cells

Inverted perovskite solar cells with over 2,000 h operational stability at 85 °C using fixed charge passivation