Abstract:The adsorption of metals using unmodified cellulose is often unsatisfactory owing to insufficient active functional groups on its surface. The objective of this work is to modify cellulose to enhance its adsorption capacity for cadmium (II). In this work, a chelating polyacrylonitrile/amidoxime-functionalized cellulose (Cel/PAN/AO) composite was successfully synthesized as modified cellulose and applied as a novel adsorbent to efficiently remove Cd 2+ from aqueous solution. Cel/PAN/AO composite was synthesized by Michael's addition between cellulose and acrylonitrile, followed by amidoximation. Tools including SEM, EDS, FTIR , XRD, TGA, XPS, BET, and zeta potential were exploited to give insights about the Cel/PAN/AO adsorbent nature as well as the adsorption mechanism. The numerous available adsorption active sites embedded into modified cellulose contribute to enhancing the adsorption capacity of Cel/PAN/AO (in comparison to unmodified cellulose) toward Cd 2+ . Using the produced composite, cadmium was removed from the water at 50 mg/L Cd 2+ by reacting 0.1 g Cel/PAN/AO with Cd 2+ at pH 5 for 90 min at 298 K. The maximum adsorption capacity of Cel/PAN/AO toward Cd 2+ was 123.23 mg/g. Cel/PAN/AO adsorbent exhibits competitive adsorption capacity as compared with other reported adsorbents. Pseudo-first-order and Langmuir's isotherm fit the sorption mechanism quite well. Cd 2+ sorption onto the Cel/PAN/AO composite was found to be an exothermic, random, and spontaneous process in the thermodynamic analyses. Moreover, Cd 2+ adsorption was also confirmed through SEM, EDS, FTIR, and XPS analysis of Cd 2+ -loaded adsorbent. Using 0.9 M KCl and 1:70 S:L ratio for 90 min, Cd 2+ was also desorbed from Cd-loaded Cel/PAN/AO. In addition, after six cycles of Cd 2+ adsorption-elution, the Cel/PAN/AO sorbent was regenerated and showed excellent reusability. It appears from the adsorption performance results of this work that the Cel/PAN/AO formulation has promise as an adsorbent for extracting Cd 2+ from wastewater.

EDTA-treated fibrillated cellulose bio-adsorbents from okra plant biomass and their performance on toxic divalent metal ions attenuation from aqueous solution

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Modified Native Cellulose Fibers-A Novel Efficient Adsorbent For Both Fluoride And Arsenic

Smart guanyl thiosemicarbazide functionalized dialdehyde cellulose for removal of heavy metal ions from aquatic solutions: adsorption characteristics and mechanism study

Removal of Heavy Metal Ions Using Modified Celluloses Prepared from Pineapple Leaf Fiber

Synthesis, Characterization, Kinetics, and Thermodynamics of EDTA-Modified Chitosan-Carboxymethyl Cellulose as Cu(II) Ion Adsorbent

DFT study of the application of polymers cellulose and cellulose acetate for adsorption of metal ions (Cd2+, Cu2+ and Cr3+) potentially toxic

Co-Adsorption/Filtration of Heavy Metal Ions from Water using Regenerated Cellulose UF Membranes Modified with DETA Ligand

Polymer Ligands Derived from Jute Fiber for Heavy Metal Removal from Electroplating Wastewater

Synthesis of bagasse-derived carboxymethyl cellulose aerogels for efficient removal of cationic dyes and heavy metal ions

Synthesis of Cellulose–Poly(Acrylic Acid) Using Sugarcane Bagasse Extracted Cellulose Fibres for the Removal of Heavy Metal Ions

The Use of New Chemically Modified Cellulose for Heavy Metal Ion Adsorption and Antimicrobial Activities

Cellulose-embedded polyacrylonitrile/amidoxime for the removal of cadmium (II) from wastewater: Adsorption performance and proposed mechanism

Synthesis, application and molecular docking of modified cellulose with diaminoguanidine as complexing agent for selective separation of Cu (II), Cd (II) and Hg (II) ions from alum sample

Click chemistry-induced modification of covalent organic framework/cellulose aerogels for removal of dye and heavy metal ions

Understanding competitive Cu 2+ and Zn 2+ adsorption onto functionalized cellulose fiber via experimental and theoretical approach

Amino-Functionalized Cellulose Nanofiber/Lignosulfonate New Aerogel Adsorbent for the Removal of Dyes and Heavy Metals from Wastewater

Removal of Cu(II) from aqueous solutions by novel EDA-functionalized clay nanocomposite fabricated as nanoadsorbents

Facile fabrication of a low-cost carboxymethyl cellulose–polyacrylamide composite for the highly efficient removal of cationic dye: optimization, kinetic and reusability

All-biomass cellulose/casein adsorbent fabricated via the "green solvent system" of ionic liquid for the efficient removal of Cu(II), Cd(II) and Pb(II)

Functionalized Cyclodextrin/Carboxymethyl Cellulose Composite Hydrogel with Double Network Structure for Adsorption of Heavy Metal Ions in Wastewater