Abstract:Frequency selective surface (FSS) has extensively been investigated over the past decades. The most famous applications of FSS are used for antennas radome and controlling radar cross section (RCS). FSS radome could reflect the signal out of the band so that the RCS could be reduced by shaping. However, with the development of radar detection technology, the scattering out of the band becomes non-negligible. In order to improve the problem, the FSS rasorber was proposed. It is the combination of the absorber and the radome. In this paper, a wideband transmission FSS rasorber is designed, acting as a stealthy radome to reduce the scattering out of band of the antenna system. The rasorber consists of an absorption layer (LayerA) and a transmission layer (LayerT). The LayerA, which use a resistor-loaded in Jerusalem cross element with non-touching centre, provides stable losses out of band and minimizes losses in the band. The LayerT use as the ground plane of an absorber based on the absorption layer within the total reflection band and providing a transmission window in the band. In order to obtain a wideband transmission, two series chokes are inserted in each leg in the LayerA and the LayerT adopts a second-order resonator. Moreover, the elements are packed densely owing to a skewed grid in the LayerA and the miniaturized non-resonant element in the LayerT. Superdense arrays cause a more stable performance of the rasorber, especially the delay of grating lobes onset. The composite structure is thoroughly analyzed by means of the full-wave numerical simulation. The simulation shows that the -1 dB transmission window is 5.7 ~ 6.7 GHz, and the -10dB reflection band is 2.2 ~ 5.1 GHz. The design would be widely used in broadband antenna system.

Homogeneous Two-Layer Structures for Broadband and Wide-Angle RCS Reduction

Ultra-wideband RCS reduction based on reflection cancellation and tunable absorption

Tapered Resistive Sheets Loading to the FSS Absorber for the Wide-Angle Monostatic RCS Reduction Applications

Surface Impedance Modulation of FSS Composite Absorber for RCS Reduction at Normal and Grazing Incidence

Anisotropic Absorbing Honeycomb and FSS Composite Structure for Curved Broadband RCS Reduction

Tapered Resistive Sheets and FSS Absorber Loading for the Wideband RCS Reduction of the Elliptic Surface at TM Polarization

Design of Broadband Wide-Angle Scatterer Surface Using Artificial Dielectric Layers

Ultralow Scattering and Broadband Metasurface Using Phase Adjustable FSS Elements Embedded With Lumped Resistors

Ultrabroadband Double-Sided and Dual-Tuned Active Absorber for UHF Band

A Wideband Transmission Frequency Selective Surface Rasorber

Broadband RCS Reduction Using Circular Sector Structure

Multilayer metasurface-based sandwich composites for wideband radar cross section reduction

Design of a Wideband Absorption Frequency Selective Rasorber Based on Double Lossy Layers

Broadband and Omnidirectionally Matched Absorber for a Discrete Source

An Offset Surface to Reduce Radar Cross Section for Airborne Antenna Out‐band

Broad bandwidth of thin composite radar absorbing structures embedded with frequency selective surfaces

Broadband Flexible Metasurface-Inspired Antenna Array with Lower Scattering on Curved Surfaces

Broadband low radar cross section frequency selective surface radome based on phase cancellation and spatial filtering

A Hybrid Mechanism Metasurface Based on Absorption and Phase Cancellation for Ultra‐Wideband RCS Reduction

An Integrated Antenna Array With Broadband, Low-RCS, and High-Gain Characteristics

A broadband reconfigurable rasorber radome based on AFSR for RCS reduction