Abstract:Adsorption techniques have been successfully applied in water purification because of their flexibility, simplicity of design, and effectiveness. Activated carbon is an effective absorbent using for dye adsorption; however, the powder structure is not conducive for practical applications and cannot be used to filter dye solutions which are challenges that still need to be addressed. Herein, a natural cellulose-based absorbent, activated carbon-<i>Juncus effusus</i> fiber (AC-JE fiber), demonstrates the removal of all kinds of dyes without selectivity and humic substances and humic-like organics from wastewater. The combined macroporous structures of JE fibers and the microporous and mesoporous structures of activated carbon particles enhance their adsorption properties. These composite absorbents have excellent adsorption and continuous filtration effect. The rejection rate is approximately 100% not only on acidic and anionic dyes but also on basic and cationic dyes. Moreover, the dye solution adsorbed by AC-JE fibers exhibits an ideal freshwater quality (almost no bacteria), similar to that of the deionized water. The AC-JE fibers prove their potential for dye removal, in both adsorption and filtration. Their sterilization ability substantiates their potential in the field of water purification as they can be used as ideal absorbents based on cellulose for removing dyes and purifying wastewater.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22104?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22104</a>.Molecular structures of several dyes (Congo red, methyl violet, rhodamine B, methylene blue, methyl orange); elemental mapping and EDX spectra of the adsorbents (H-JE fibers and AC-JE fibers); adsorption properties of JE fibers by the effect of dosage and contact time; water quality of lake water adsorbed by JE, AC, AC-JE, polystyrene beads, and limestone (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22104/suppl_file/am0c22104_si_001.pdf">PDF</a>)Movie S1 showing filtration effect of the mixed dye solution (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22104/suppl_file/am0c22104_si_002.avi">AVI</a>)This article has not yet been cited by other publications.

Purification of dye-contaminated ethanol-water mixture using magnetic cellulose powders derived from agricultural waste biomass

Easily separated and sustainable cellulose-based adsorbent using a facile two-step modification for highly efficient methylene blue removal

Efficient Removal of Dye from Wastewater without Selectivity Using Activated Carbon- Juncus effusus Porous Fibril Composites

Green synthesis of a magnetic β-cyclodextrin polymer for rapid removal of organic micro-pollutants and heavy metals from dyeing wastewater

Green fabrication of porous microspheres containing cellulose nanocrystal/MnO2 nanohybrid for efficient dye removal

Green synthesis of a magnetic -cyclodextrin polymer for rapid removal of organic micro-pollutants and heavy metals from dyeing wastewater

Preparation of hemicellulose-based hydrogels from biomass refining industrial effluent for effective removal of methylene blue dye

Fabrication of Monodisperse Magnetic Polystyrene Mesoporous Composite Microspheres for High-Efficiency Selective Adsorption and Rapid Separation of Cationic Dyes in Textile Industry Wastewater

Regenerated Cellulose/polyethyleneimine Composite Aerogel for Efficient and Selective Adsorption of Anionic Dyes

Efficient removal of copper ions and organic dyes using chitosan, pectin, and magnetic hydrogel composites: Structural characterization and adsorption mechanisms

In Situ Synthesis of Magnetic Poly(DMAEAB-co-NIPAm)@Fe3O4 Composite Hydrogel for Removal of Dye from Water

Facile preparation of biomass lignin-based hydroxyethyl cellulose super-absorbent hydrogel for dye pollutant removal

Novel High-efficiency adsorbent consisting of magnetic Cellulose-based ionic liquid for removal of anionic dyes

Silk Sericin Enrichment through Electrodeposition and Carbonous Materials for the Removal of Methylene Blue from Aqueous Solution

Ultrasound-assisted preparation of Fe(OH)3@bacterial cellulose aerogel for efficient removal of organic contamination in water

Magnetic Core@Shell Fe 3 O 4 @Polypyrrole@Sodium Dodecyl Sulfate Composite for Enhanced Selective Removal of Dyestuffs and Heavy Metal Ions from Complex Wastewater

Fast and highly efficient removal of dyes under alkaline conditions using magnetic chitosan-Fe(III) hydrogel.

Super-efficient removal and adsorption mechanism of anionic dyes from water by magnetic amino acid-functionalized diatomite/yttrium alginate hybrid beads as an eco-friendly composite

Preparation and optimization of porous regenerated cellulose microspheres from cellulose tetraethyl-ammonium/urea solution for adsorption of cationic methylene blue dye

Hollow Biomass Adsorbent Derived from Platanus Officinalis Grafted with Polydopamine-Mediated Polyethyleneimine for the Removal of Eriochrome Black T from Water

Click chemistry-induced selective adsorption of cationic and anionic dyes using functionalized cellulose methacrylate hydrogels