Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

Modeling distribution and change of loess pore structure by two-dimensional distinct element method analyses

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Undrained Cyclic Behavior of Granular Materials Considering Initial Static Shear Effect: Insights from Discrete Element Modeling

Historical shear deformation of rock fractures derived from quantitative three-dimensional description of fracture surfaces on digital outcrop models (DOMs)

The Effect of Particle Size Distribution And Shape On The Microscopic Behaviors of Loess Via DEM

Simulation and Analysis of Shear Properties of Loess and Concrete Structures Based on the Discrete Element Method

The effect of particle size distribution and shape on the microscopic behaviour of loess via the DEM

Physical and Mechanical Properties and Microstructures of Slip Soil of Loess Bedrock Contact Landslide

Micromechanical study of loess permeability and seepage erosion based on microstructure functional basic unit and seepage simulation in pore domain

Three-dimensional characterization and quantitative research of Malan loess microstructure under seismic loading

A modified discontinuous deformation analysis method considering the bonding effect for the simulation of structural loess

Quantitative Research and Characterization of the Loess Microstructure in the Bai Lu Tableland, Shaanxi Province, China

Study on mechanism of particle aggregation and pore formation during loess air-fall deposition based on discrete element method

Assessment of shear band evolution using discrete element modelling

A model for the formation and evolution of structure of initial loess deposits

Discrete Element Modelling of a Soil-Rock Mixture Used in an Embankment Dam

DEM Analyses of the Mechanical Behavior of Soil and Soil-Rock Mixture Via the 3D Direct Shear Test

Wetting-Induced Collapse Behavior of Unsaturated and Structural Loess under Biaxial Tests Using Distinct Element Method

Analysis of Slope Failure Mechanisms Considering Micropile-Soil Interaction