Abstract:Fiber pump lasers are widely used in a variety of fields, such as optical fiber communication, national defense, and medical beauty due to their high beam quality and intense laser energy. However, the alignment errors of optical parameters can influence the beam quality in the packaging of the fiber pump lasers. It is necessary to analyze the reflector, focusing lens, fiber, and the laser diode on the coupling influence between for guiding the fiber pump laser packaging. Firstly, we establish the optical path between the laser diode, focusing lens and reflector based on the physical ray-tracing method. On the other hand, the high coupling efficiency of whole system is achieved by optimize the parameters of each optical element. The simulation result shows that the highest coupling efficiency is 98.6% based on optimizing the parameters of the optical path while the experimental result of coupling efficiency is 90.36%. Also, the effects of refractive index, wavelength and fiber diameter on coupling efficiency are further investigated. The experimental results show that the radial displacement has the greatest influence on the coupling efficiency. The simulation results show that increasing the fiber core diameter can effectively improve the coupling efficiency. The results of rigorous analysis will provide an effective reference for manufacturing compact, high coupling efficiency fiber pumped laser.

Tracing the origins of mode coupling for beam quality optimization in high-power fiber laser delivery systems

Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

Nonlinearity Optimization of Dissipative-Soliton Fiber Laser for Generation of Pulses with 350 Kw Peak Power

High-speed modal analysis of dynamic modal coupling in fiber laser oscillator

Study of mode propagation with 632.8-nm laser in tapered fiber

Experimental study of the influence of mode excitation on mode instability in high power fiber amplifier

Investigations on Transverse-Mode Competition and Beam Quality Modeling in End-Pumped Lasers

The coupling study between multi-channel laser diodes and multimode fiber in a fiber pump laser

Transverse mode instability mitigation in high-power confined-doped fiber amplifier with good beam quality through seed laser control

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

Efficiency and Beam Quality Deterioration in Double-Cladding Fiber Amplifiers Induced by Core Misalignment of Fusion Splices

Experimental Investigation of Quasi-Static Mode Degradation in a High Power Large Mode Area Fiber Amplifier.

Deterioration of Laser Beam Quality Caused by Cladding Modes in Fusion Splices of Double-Cladding Fibers

Mitigating transverse mode instability in fiber laser oscillator by employing direct pump modulation

Direct coupling of high-power LD to the multi-mode optical fiber

Comparison and Optimization on Transverse Mode Instability of Fiber Laser Amplifier Pumped by Wavelength-Stabilized and Non-Wavelength-Stabilized 976 Nm Laser Diode

Transverse Mode Switchable Fiber Laser with a Multimodal Interference-Based Beam Shaper

Integration of an anti-resonant hollow-core fiber with a multimode Yb-doped fiber for high power near-diffraction-limited laser operation

Mitigating mode instabilities by controllable mode beating excitation with a photonic lantern

Analysis of Coupling Losses for All-Fiber Integration of Subwavelength Core Hybrid Optical Fibers

Static and dynamic mode evolution in high-power distributed side-coupled cladding-pumped fiber amplifiers