Abstract:Processing and characterization of metal‐reinforced hybrid polymer composites. Jute fiber has emerged as a promising reinforcement material in polymer composites, and researchers are actively exploring hybrid composite materials to overcome its individual mechanical property limitations and enhance overall performance. The paper introduces a unique hybridization of polymer composites that harnesses the advantages of stainless steel and aluminium offering a lightweight material for potential engineering applications. In this study, stainless steel 304 wire mesh (S), aluminium wire mesh (Al) and aluminium perforated sheet (Alp) are used as an additional reinforcement along with jute (J) and glass (G) fibers to fabricate hybrid polymer composites with varying volume fractions of SS304 and Al wire mesh. Seven laminates of hybrid composites namely J/J/J/S/J/J/J, J/J/S/J/J/S/J/J, J/J/J/Al/J/J/J, J/J/Al/J/J/Al/J/J, J/J/J/Alp/J/J/J, G/J/J/J/S/J/J/J/G, (J/J/S/J/J/S/J/J)450 along with virgin composite laminate J/J/J/J/J/J/J/J were fabricated and tested to obtain mechanical and vibration properties. Bonding between metal wire and matrix is investigated and reported through ILLS tests and SEM observations. Experimental findings indicate a notable 24% and 7% increase in tensile and ILSS strength, respectively, with SS304 reinforcement. Moreover, significant improvements in flexural and impact strength, approximately 48% and 33% for J/J/S/J/J/S/J/J, demonstrate the effectiveness of the hybrid approach. The J/J/S/J/J/S/J/J laminate excels in damping capacity under various boundary conditions. The study underscores the potential of metallic reinforcement to enhance the mechanical properties of jute fiber‐reinforced polymer composites, presenting opportunities for the development of lightweight, sustainable, and high‐performance materials in engineering applications. Highlights Developed jute fiber‐based hybrid polymer composites with metal wire reinforcement. Significant increase in strength and stiffness observed with addition of metal wires. Bonding between metal wire and matrix is investigated through ILLS tests and SEM observations. Vibration damping of all hybrid materials is reported. Study provides valuable data to develop sustainable, lightweight, and cost‐effective materials.

Effect of hybridization and composite architecture symmetry in the bonded joint performance of jute/carbon fibre-reinforced composites

Mechanical characterization of jute/carbon hybrid epoxy composites

Mechanical and Hygroscopic Characteristics of Unidirectional Jute/Glass and Jute/Carbon Hybrid Laminates

Experimental study of bonded, bolted, and hybrid bonded-bolted single lap shear joints with woven CFRP adherends

Development of hybrid green composites by dual natural fibers (jute/bamboo) reinforcement and investigation of their mechanical behavior

Experimental study of the influence of adhesive reinforcement in lap joints for composite structures subjected to mechanical loads

Experimental investigation of the mechanical and water absorption properties on fiber stacking sequence and orientation of jute/carbon epoxy hybrid composites

Parametric study on the load-carrying capacity of plain-woven composites hybrid bonded-bolted joints

Experimental study on the effects of SS304 and Aluminium reinforcements on mechanical and vibration properties in jute‐epoxy composites

Mechanical study on hybrid joining type carbon fiber reinforced composite

Optimisation of bonded and hybrid step lap joints of thick carbon fibre/epoxy panels used in aircraft structures

Experiment and simulation study on bonded, bolted and hybrid bolted/bonded joints of textile CFRP using bimodulus constitutive model

Assessment of Shear Fracture Energy in Hybrid Composites with Natural and Synthetic Fibers

Material and adhesive effect in adhesively-bonded composite stepped-lap joints

Experimental Investigation and Numerical Simulation of Bonded, Bolted, and Hybrid Joints in CFRP Laminates Under Tensile Loading

Mechanical properties of all-C/C composite hybrid bonded/bolted joints

The Tensile Behavior of Hybrid Bonded Bolted Composite Joints: 3D-Digital Image Correlation versus Finite Element Analysis

Numerical and experimental investigation on the load‐bearing performance of plain‐woven composites hybrid bonded‐bolted joints

Experimental investigations of bolted, adhesively bonded and hybrid bolted/bonded single-lap joints in composite laminates

Experimental study of bonded, bolted, and hybrid braided CFRP joints with different stacking sequences and lapping patterns

A detailed experimental parametric analysis of bolted and hybrid bolted/bonded composite joints