Abstract:Miniaturized laser-initiated pyrotechnic devices have great application prospects in aerospace and modern weapon systems due to their excellent energy output performance and reliability. In order to develop a low-energy insensitive laser detonation technology based on a two-stage charge structure, it is important to deeply analyze the motion law of a titanium flyer plate driven by the deflagration of the first-stage charge (RDX). The effects of the charge mass of RDX, flyer plate mass, and barrel length on the motion law of flyer plates were studied through a numerical simulation method based on the Powder Burn deflagration model. The consistency between the numerical simulation and the experimental results was analyzed using the paired t confidence interval estimation method. The results show that the Powder Burn deflagration model can effectively describe the motion process of the RDX deflagration-driven flyer plate with a 90% confidence level, and its velocity error is ≤6.7%. The speed of the flyer plate is proportional to the mass of the RDX charge, inversely proportional to the mass of the flyer plate, and exponentially related to its moving distance. As the moving distance of the flyer plate increases, the RDX deflagration products and air in front of the flyer plate are compressed, which inhibits the motion of the flyer plate. In the optimum state (the mass of the RDX charge is 60 mg, the mass of the flyer is 85 mg, and the length of the barrel is 3 mm), the speed of the titanium flyer reaches 583 m/s, and the peak pressure of the RDX deflagration reaches 2182 MPa. This work will provide a theoretical basis for the refined design of a new generation of miniaturized high-performance laser-initiated pyrotechnic devices.

Shock experiments and numerical simulations on low energy portable electrically exploding foil accelerators

System modeling and simulation of flyer acceleration and explosive detonation in exploding foil initiator

Design, fabrication and performance test of an integrated exploding foil initiator system

Investigation of system parameters towards safer impact based shock-to-detonation transition in a novel laser driven flyer plate prototype

Research Progress in the Function Mechanism of Exploding Foil Initiator

Multi frame radiography of supersonic water jets interacting with a foil target

Point projection radiography of electromagnetically accelerated flyer plates with an external X-pinch driver

Numerical Simulation Study of Laser-Driven Shock Wave Propagation in Planar Al Foil Targets

Ultra-High Gradient Channeling Acceleration in Nanostructures: Design/Progress of Proof-of-Concept (POC) Experiments

Efficient target acceleration using underwater electrical explosion of wire array

Calculations of Electrically Exploded Metal Foil and Driven Flyer

Recent Advances in Hyper-Velocity Flyer Launch Experiments on Pts

Hypervelocity Launching of Flyers at the Sg-Iii Prototype Laser Facility

Dynamic flyer in barrel imaging via high intensity short-pulse laser

Electrostatic shock acceleration of ions in near-critical-density plasma driven by a femtosecond petawatt laser

Theoretical low-energy design of exploding foil initiator

Numerical Analysis on Acceleration Process and Shock Initiation of Parylene C−Cu Flyer in Exploding Foil Initiator

Modeling of the exploding foil initiator and related circuitry for the variable mode of operation

Performance of Integrated Exploding Foil Energy Conversion Unit Based on FPC

Theoretical Analysis and Numerical Simulation of the Motion of RDX Deflagration-Driven Flyer Plate Based on Laser-Initiated Micro-Pyrotechnic Devices

Energy conversion efficiency of electrical exploding foil accelerators