Abstract:Portable, low-cost smartphone platform microscopic systems have emerged as a potential tool for imaging of various micron and submicron scale particles in recent years (Ozcan; Pirnstill and Coté; Breslauer et al.; Zhu et al.). In most of the reported works, it involves either the use of sophisticated optical set-ups along with a high-end computational tool for postprocessing of the captured images, or it requires a high-end configured smartphone to obtain enhanced imaging of the sample. Present work reports the working of a low-cost, field-portable 520× optical microscope using a smartphone. The proposed smartphone microscopic system has been designed by attaching a 3D printed compact optical set-up to the rear camera of a regular smartphone. By using cloud-based services, an image processing algorithm has been developed which can be accessed anytime through a mobile broadband network. Using this facility, the quality of the captured images can be further enhanced, thus obviating the need for dedicated computational tools for postprocessing of the images. With the designed microscopic system, an optical resolution ∼2 µm has been obtained. Upon postprocessing, the resolution of the captured images can be improved further. It is envisioned that with properly designed optical set-up in 3D printer and by developing an image processing application in the cloud, it is possible to obtain a low-cost, user-friendly, field-portable optical microscope on a regular smartphone that performs at par with that of a laboratory-grade microscope. LAY DESCRIPTION: With the ever-improving features both in hardware and software part, smartphone becomes ubiquitous in the modern civilised society with approximately 8.1 billion cell phone users across the world, and ∼40% of them can be considered as smartphones. This technology is undoubtedly the leading technology of the 21st century. Very recently, various researchers across the globe have utilised different sensing components embedded in the smartphone to convert it into a field-portable low-cost and user-friendly tool which can be used for different sensing and imaging purposes. By using simple optical components such as lens, pinhole, diffuser etc. and the camera of the smartphone, various groups have converted the phone into a microscopic imaging system. Again, by removing the camera lenses of the phone, holography images of microscopic particles by directly casting its shadows on the CMOS sensor on the phone has been demonstrated. The holographic images have subsequently been processed using the dedicated computational tool, and the original photos of the samples can be obtained. All the reported smartphone-based microscopic systems either suffer from relatively low field-of-view (FOV), resolution or it needs a high computational platform. Present work, demonstrate an alternative approach by which a reasonably good resolution (<2 µm) along with high optical magnification (520×) and a large FOV (150 µm) has been obtained on a regular smartphone. For postprocessing of the captured images an image processing algorithm has been developed in the cloud and the same can be accessed by the smartphone application, obviating the need of dedicated computational tool and a high-end configured smartphone for the proposed microscope. For the development of the proposed microscopic system, a simple optical set-up has been fabricated in a 3D printer. The set-up houses all the required optical components and the sample specimen with the 3D-printed XY stage, and it can be attached easily to the rear camera of the smartphone. Using the proposed microscopic system, enhanced imaging of USAF target and red blood cells have been successfully demonstrated. With the readily available optical components and a regular smartphone, the net cost involvement is significantly low (less than $250, including the smartphone). We envisioned that the designed system could be utilised for point-of-care diagnosis in resource-poor settings where access to the laboratory facilities is very limited.

A fully 3D-printed optical microscope for low-cost histological imaging

3D Printing a Low-Cost Miniature Accommodating Optical Microscope

Low-cost 3D printed lenses for brightfield and fluorescence microscopy

3D Printing a Low‐Cost Miniature Accommodating Optical Microscope (adv. Mater. 20/2023)

3D-printable portable open-source platform for low-cost lens-less holographic cellular imaging

Printing, Characterizing, and Assessing Transparent 3D Printed Lenses for Optical Imaging

Development of a low-cost robotized 3D-prototype for automated optical microscopy diagnosis: An open-source system

Adapting the 3D-printed Openflexure microscope enables computational super-resolution imaging

3D‐Printed Micro Lens‐in‐Lens for In Vivo Multimodal Microendoscopy

Design of a 3D printed smartphone microscopic system with enhanced imaging ability for biomedical applications

Ultrafast 3D Histological Imaging Based on a Minutes-Time Scale Tissue Clearing and Multidirectional Selective Plane Illumination Microscopy

A 45° tilted 3D-printed scanner for compact side-view laser scanning endoscopy

High-throughput 3D printing of customized imaging lens

A one-piece 3D printed flexure translation stage for open-source microscopy

Multi-modal microscopy imaging with the OpenFlexure Delta Stage

High-resolution low-cost LCD 3D printing for microfluidics and organ-on-a-chip devices

Ultrathin monolithic 3D printed optical coherence tomography endoscopy for preclinical and clinical use

Low-cost, versatile, and highly reproducible microfabrication pipeline to generate 3D-printed customised cell culture devices with complex designs

3D printed chamber for live cell imaging on an upright epifluorescence microscope

Design and Implementation of Three-Dimensional Printable Optomechanical Components

High-resolution low-cost LCD 3D printing of microfluidics