Abstract:Low-strength anastomoses and thermal damage of tissue are major concerns in laser tissue welding techniques where laser energy is used to induce thermal changes in the molecular structure of the tissues being joined, hence allowing them to bond together. Laser tissue soldering, on the other hand, is a bonding technique in which a protein solder is applied to the tissue surfaces to be joined, and laser energy is used to bond the solder to the tissue surfaces. The addition of protein solders to augment tissue repair procedures significantly reduces the problems of low strength and thermal damage associated with laser tissue welding techniques. Investigations were conducted to determine optimal solder and laser parameters for tissue repair in terms of tensile strength, temperature rise and damage and the microscopic nature of the bonds formed. An in vitro study was performed using an 808 nm diode laser in conjunction with indocyanine green (ICG)-doped albumin protein solders to repair bovine aorta specimens. Liquid and solid protein solders prepared from 25% and 60% bovine serum albumin (BSA), respectively, were compared. The efficacy of temperature feedback control in enhancing the soldering process was also investigated. Increasing the BSA concentration from 25% to 60% greatly increased the tensile strength of the repairs. A reduction in dye concentration from 2.5 mg ml(-1) to 0.25 mg ml(-1) was also found to result in an increase in tensile strength. Increasing the laser irradiance and thus surface temperature resulted in an increased severity of histological injury. Thermal denaturation of tissue collagen and necrosis of the intimal layer smooth muscle cells increased laterally and in depth with higher temperatures. The strongest repairs were produced with an irradiance of 6.4 W cm(-2) using a solid protein solder composed of 60% BSA and 0.25 mg ml(-1) ICG. Using this combination of laser and solder parameters, surface temperatures were observed to reach 85+/-5 degrees C with a maximum temperature difference through the 150 microm thick solder strips of about 15 degrees C. Histological examination of the repairs formed using these parameters showed negligible evidence of collateral thermal damage to the underlying tissue. Scanning electron microscopy suggested albumin intertwining within the tissue collagen matrix and subsequent fusion with the collagen as the mechanism for laser tissue soldering. The laser tissue soldering technique is shown to be an effective method for producing repairs with improved tensile strength and minimal collateral thermal damage over conventional laser tissue welding techniques.

Robotic Laser Tissue Soldering for Damage-free Soft Tissue Fusion Guided by Fluorescent Nanothermometry

Nanothermometry-Enabled Intelligent Laser Tissue Soldering

Reconstruction of Soft Biological Tissues Using Laser Soldering Technology with Temperature Control and Biopolymer Nanocomposites

An extensive evaluation of laser tissue welding and soldering biotechnologies: Recent advancements, progress, and applications

Tissue Ablation with Multi-Millimeter Depth and Cellular-Scale Collateral Damage by a Femtosecond Mid-Infrared Laser Tuned to the Amide-I Vibration

Materials for multifunctional balloon catheters with capabilities in cardiac electrophysiological mapping and ablation therapy.

Closed-Feedback Control of Laser Soldering of Rat Skin Using Diode Laser

Photothermal effects of laser tissue soldering

Soft robotic manipulator for intraoperative MRI-guided transoral laser microsurgery

Multimodal feedback systems for smart laser osteotomy: Depth control and tissue differentiation

A Novel Surface-Scanning Device for Intraoperative Tumor Identification and Therapy

Laser tissue welding: a comprehensive review of current and future clinical applications

Laser-Induced Fluorescence And Reflected White Light Imaging For Robot-Assisted Mis

Microstructure Evolution of Laser Skin Tissue Welding under the Control of Energy Regulation

Application of albumin protein and indocyanine green chromophore for tissue soldering by using an IR diode laser: ex vivo and in vivo studies

Flexible fiberbotic laser scalpels: Material and fabrication challenges

Micro/nanostructured surface modification using femtosecond laser pulses on minimally invasive electrosurgical devices

Fiberbots: Robotic fibers for high-precision minimally invasive surgery

Sewing up the Wounds: A Robotic Suturing System for Flexible Endoscopy

μRALP and Beyond: Micro-Technologies and Systems for Robot-Assisted Endoscopic Laser Microsurgery

Overcoming the Force Limitations of Magnetic Robotic Surgery: Impact-based Tetherless Suturing