Abstract:Three-dimensional (3D) printing of hybrid scaffolds with material gradients, combining soft and hard phases, is an appealing frontier in additive manufacturing. However, most 3D printers are limited to either three-axis or mono-material capabilities, rendering them unsuitable for fabricating hybrid scaffolds. Additionally, printing on curved surfaces requires advanced printing capabilities. Our work aims to advance additive manufacturing by developing a hybrid piezoelectric inkjet-extrusion printer equipped with five-axis functionalities. The printer could be used to fabricate customized hybrid scaffolds, surpassing conventional mono-material or linear three-axis printing strategies. The soft phase comprises a low-viscosity photocurable resin and a high-viscosity peptide hydrogel, while the hard phase comprises 3D-printed polylactic acid and hydroxyapatite parts. To validate the system, we fabricated three hybrid scaffolding use cases, characterized by multi-material porous structures fabricated on planar, single-curved, and free-form surfaces. The scaffolds were subsequently analyzed using digital microscopy to assess their accuracy, particularly the feature sizes of pores and struts (i.e., 0.8–3.6 mm). In the first part of the study, we demonstrated the versatility of inkjet and extrusion printing by hybrid printing an interconnected network in the soft phase on top of a planar ceramic hard phase. A pore width and height deviation of 6% was achieved compared to the intended design. In the second part of the study, we evaluated the 3D inkjet printing of a multi-material porous scaffold on a single-curved surface for osteochondral defects. The circumferential pore width and radial pore height deviated by 0.8% and 2%, respectively. Finally, we inkjet-printed a mesh structure on a free-form surface, which acted as a membrane for palatal implants. In this case, the pore width deviations were -16% in the printing direction and 2% perpendicular to the printing direction.

Minimal-invasive 3D laser printing of microimplants

Minimal‐Invasive 3D Laser Printing of Microimplants in Organismo

Freeform laser and inkjet printing of biological constructs

Two‐Photon Laser Printing to Mechanically Stimulate Multicellular Systems in 3D

Micro injection molding of individualised implants using 3D printed molds manufactured via digital light processing

Toward high-resolution 3D-printing of pharmaceutical implants - A holistic analysis of relevant material properties and process parameters

Two-Photon Direct Laser Writing of 3D Scaffolds through C, H-Insertion Crosslinking in a One-Component Material System

Responsive 3D Printed Microstructures Based on Collagen Folding and Unfolding

Spatial-Selective Volumetric 4D Printing and Single-Photon Grafting of Biomolecules within Centimeter-Scale Hydrogels via Tomographic Manufacturing

Noninvasive in Vivo 3D Bioprinting

Leveraging 3d Bioprinting And Photon‐Counting Computed Tomography to Enable Noninvasive Quantitative Tracking of Multifunctional Tissue Engineered Constructs

Micro/Nanoarchitectonics of 3D Printed Scaffolds with Excellent Biocompatibility Prepared Using Femtosecond Laser Two-Photon Polymerization for Tissue Engineering Applications

Volumetric Bioprinting of Complex Living-Tissue Constructs Within Seconds

Development of a five-axis printer for the fabrication of hybrid 3D scaffolds: From soft to hard phases and planar to curved surfaces

Photoinhibiting Via Simultaneous Photoabsorption and Free-Radical Reaction for High-Fidelity Light-Based Bioprinting

Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers

Upconversion 3D Bioprinting for Noninvasive In Vivo Molding

A Multifunctional 3D Bioprinting System for Construction of Complex Tissue Structure Scaffolds: Design and Application

On-Chip Fabrication and In-Flow 3D-Printing of Cell-Laden Microgel Constructs: From Chip to Scaffold Materials in One Integral Process

Laser Lithography for Bioprinting: From 3D Scaffolds to Plant Based Resins

Laser-assisted bioprinting of targeted cartilaginous spheroids for high density bottom-up tissue engineering