Abstract:A near-IR high-resolution, R=80000 spectrometer has been developed at IPAG to directly characterize the atmosphere of exoplanets using adaptive optics (AO) assisted telescopes, and a single-mode fiber-injection unit. A first technical test with the 200' Hale telescope at Palomar Observatory occurred in March 2022 using the PALM3000 AO system offered by this telescope. Observations have also been made at the same time with the PARVI spectrometer so that a direct comparison can be made between the two instruments. This spectrometer uses a virtually imaged phased array (VIPA) instead of an echelle grating, resulting in a very compact optical layout that fits in a 0.25m3 cryostat. Using a quarter of an H2RG detector, the spectrometer analyses the middle part of the H-band, from 1.57 to 1.7 microns for 2 sources whose light is transferred from the telescope to the spectrometer using single-mode fibers. By design, the transmission of the spectrometer is expected to be 40-50%, which is 2-3 times higher than the transmission of current high-resolution spectrometers such as CRIRES+ and NIRSPEC. A damaged cross-disperser limited it to 21%, however. A replacement grating with a correct, twice as high efficiency has been procured after the on-sky demonstration. In addition to recalling the main specifications of the VIPA spectrometer, this paper presents the control software, the calibration process, and the reduction pipeline that have been developed for the instrument. It also presents the results of the on-sky technical test with the Hale telescope, as well as measurements of the effective resolution and transmission, along with a comparison of a spectrum of the sun obtained with the spectrometer with the BASS2000 reference spectrum. Planned modifications are also discussed. That includes the integration of a new dedicated H2RG detector, and of K-band optics.

High resolution Fabry-Perot spectrometer for infrared astronomy

The school child.

A Pressure-tuned Field-widened Michelson Interferometer System As the Spectroscopic Filter of High-Spectral-resolution Lidar

Field-widened Michelson Interferometer System As the Spectroscopic Filter of High-Spectral-resolution Lidar

Development of A Field-Widened Michelson Spectroscopic Filter for A Polarized Near-Infrared High Spectral Resolution Lidar

Optical System Design for a Shortwave Infrared Imaging Spectrometer

The Mid-Infrared Instrument for the James Webb Space Telescope: IV. The Low Resolution Spectrometer

Development and validation of a cryogenic far-infrared diffraction grating spectrometer used to post-disperse the output from a Fourier transform spectrometer

First on-sky results of a FIOS prototype, a Fabry Perot Based Instrument for Oxygen Searches

All-mirror wavefront division interferometer for mid-infrared spectrometry

Towards extremely high-resolution broad-band flat-field spectrometer in 'water window'

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

Compact broadband high-resolution infrared spectrometer with a dihedral reflector.

Optimizing the Efficiency of Fabry-Perot Interferometers with Silicon-Substrate Mirrors

Arrayed waveguide grating spectrometers for astronomical applications: new results

On-sky demonstration at Palomar Observatory of the near-IR, high-resolution VIPA spectrometer

Geostationary Full-Spectrum Wide-Swath High-Fidelity Imaging Spectrometer: Optical Design and Prototype Development

Fabry-Pérot open resonant cavities for measuring the dielectric parameters of mm-wave optical materials

Ultrahigh Resolution Spectroscopy Across the Visible to Infrared Spectrum Using Multi-Mode Interference in a Compact Tapered Fiber

Infrared instrumentation for large telescopes: an alternative approach