Abstract:The Short Baseline Near Detector (SBND) is one of three liquid argon (LAr) neutrino detectors sitting in the Booster Neutrino Beam (BNB) at Fermilab as part of the Short Baseline Neutrino (SBN) program. The detector is in a cryostat holding 260-ton of LAr and consists of four 2.5 m (L) $\times$ 4 m (W) Anode Plane Assembles (APAs) and two Cathode Plane Assemblies (CPAs), which leads to 11,264 Time Projection Chamber (TPC) readout channels and two separate 2 m long drift regions. As an enabling technology, Cold Electronics (CE) developed for cryogenic temperature operation makes possible an optimum balance among various design and performance requirements for such large sized detectors. Brookhaven National Laboratory (BNL) has been leading the R&D and implementation of the entire front-end CE system for LAr TPC readout in collaboration with other SBND institutes. The front-end readout electronics system includes the cold front-end electronics placed close to the wire electrodes, which detects and digitizes the charge signal in LAr, as well as the warm interface electronics placed on the signal feed-through flange outside of the cryostat, which further organizes and transmits the digitized signal to the DAQ system. An extensive study of electronics suitable for 77 K - 300 K, including the custom designed front-end ASIC and commercial components, e.g. ADC and FPGA, has been made to meet requirements such as low noise, low power consumption, high reliability and long lifetime. Furthermore, an integral design concept of APA, CE, feed-through, warm interface electronics with local diagnostics, grounding and isolation rules has been practiced with vertical slice test stands to make projection of the CE performance in the SBND detector.

Parallel data readout for background rejection in CANDLES experiment

$μ$TCA DAQ system and parallel reading in CANDLES experiment

Design and Demonstration of Digital Readout Chain in NνDEx Experiment

Fast readout of multi-channel detectors by using a CCD/CMOS camera

Low Noise Cold Electronics System for SBND LAr TPC

Preliminary Design of a FADC Readout System for the Alpha/Beta Discrimination in a Large Area Plastic Scintillation Detector

The Data Acquisition System of the Na62 Experiment at Cern

Development of a modular and scalable data acquisition system for calorimeters at a linear collider

Front-end-Electronics for the SiPM-readout gaseous TPC for neutrinoless double beta decay search

Online data acquisition and the control system for the Double Chooz experiment

Back-end Electronics for Low Background and Medium Scale Physics Experiments Based on an Asymmetric Network

A Flexible Data Acquisition System Architecture for the Nab Experiment

RADiCAL: Precision-timing, Ultracompact, Radiation-hard Electromagnetic Calorimetry

Development of a data overflow protection system for Super-Kamiokande to maximize data from nearby supernovae

Improving the Limits of Detection of Low Background Alpha Emission Measurements

Data Acquisition System for CSNS Neutron Beam Monitor

A Fast Front-end Readout Design for NICA-MPD Shashlik Electromagnetic Calorimeter

A digital CDS technique and the performance testing

Low Background Thermal Neutron Detector System

Prototype of Readout Electronics for GAEA Gamma Spectrometer of Back-n Facility at CSNS

A Low-Power Time-to-Digital Converter for the CMS Endcap Timing Layer (ETL) Upgrade