Abstract:The scalability of surface electrode ion traps has been progressively improved with the on-chip integration of conventional bulk components. Based on the development of through-silicon-via (TSV)-integrated ion trap, in this work, we further simplify the back-end assembly process by patterning a redistribution layer (RDL) onto a customized ceramic pin grid array (C-CPGA) package. This RDL has an internal connection with a CPGA pin on the back side, rerouting the electrical signal and facilitating the direct bonding of the TSV trap and CPGA. The patterned neighboring RDL has an averaged resistance of $4.5\times 10^{12}\,\Omega $ , three orders of magnitude higher than that of the TSV trap itself. As compared to the previous assembly (glass interposer wire bonded to a conventional CPGA), a small parasitic capacitance increase of 0.1 pF of the C-CPGA is observed. Radio frequency (RF) electrical tests indicate that the trap on C-CPGA will not induce additional power loss. Meanwhile, due to the high thermal conductivity of ceramic materials, the heat dissipation capability of C-CPGA is boosted. The functionality of the TSV trap on C-CPGA is also demonstrated by trapping and laser cooling the 88Sr $^{+}$ ions. The measured heating rate (21 quanta per millisecond for an axial frequency of 300 kHz) is comparable with the trap assembled in the previous approach. This indicates that the CPGA with built-in RDL is fully compatible with ion trapping applications, providing a new approach toward compact, flexible, and robust ion trap assembly.

Phoenix and Peregrine Ion Traps

Demonstration of a microfabricated surface electrode ion trap

(k,m)-Catalan Numbers and Hook Length Polynomials for Plane Trees

Heating rate and electrode charging measurements in a scalable, microfabricated, surface-electrode ion trap

Surface trap with dc-tunable ion-electrode distance

Controlling trapping potentials and stray electric fields in a microfabricated ion trap through design and compensation

Novel ion traps using planar resistive electrodes: implications for miniaturized mass analyzers

Design and Development of Single-Qubit Ion Trap on Glass and Si Substrates with RF Analysis and Performance Benchmarking

Microfabricated Ion Traps

Experimental investigation of planar ion traps

Quadrupole ion traps and trap arrays: geometry, material, scale, performance.

Microfabricated Chip Traps for Ions

Simplified Assembly of Through-Silicon-Via Integrated Ion Traps

Cold CAS Ion Trap -- 22 pole trap with ring electrodes for astrochemistry

Transport of ions in a segmented linear Paul trap in printed-circuit-board technology

Fabrication of High Aspect Ratio Micro-Penning-Malmberg Gold Plated Silicon Trap Arrays

Surface-Electrode Ion Trap with Ground Structures for Minimizing the Dielectric Loss in the Si Substrate

Fast and high-yield fabrication of axially symmetric ion-trap needle electrodes via two step electrochemical etching

Industrially Microfabricated Ion Trap with 1 eV Trap Depth

Fabrication and Characterization of Surface Electrode Ion Trap for Quantum Computing

Circular Arrays of Polymer-Based Miniature Rectilinear Ion Traps