Abstract:Reducing the tortuosity of electrodes is an efficient technique for enhancing the charge transfer inside electrodes and boosting the fast-charging capabilities of lithium-ion batteries for electric vehicles. Compared to reported complex methods, screen printing is facile, economical, and printing pattern controllable. More importantly, the roll-to-roll screen printing equipment can be integrated into the existing electrode production system, allowing for the industrialization of low-tortuosity electrodes. However, the absence of screen-printable inks with a high solid content restricts the ink transfer volume per printing, lowering production efficiency and raising the price of screen-printed electrodes. By integrating rheological characteristics analysis, X-ray computed tomography characterization, and coarse-grained molecular dynamics (CGMD) simulation, we are able to recognize and illustrate the relevance of the molecular chain state in high-solid-content ink for screen printability. Additionally, we propose and develop a unique preparation procedure for producing high-solid-content screen-printable inks. In addition, the electrochemical performance of screen-printed electrodes was evaluated in order to enclose the importance of electrode micromorphology. This finding lays the door for the industrialization of screen-printable inks with high solid content and encourages additional research into screen-printed architectures with functional electrodes. In this work, we demonstrated for the first time that the molecular chains within high-solid-content inks should be untangled to obtain outstanding screen printability. Specifically, the twisted molecular chains serve as extra networks that drag certain particles within the electrode ink onto the mesh, hence diminishing its screen printability. Therefore, we suggest a two-step approach for opening the twisted molecular chains of inks with a high solid content of 60%. Employing this type of ink, the mass loading per printing layer elevates to about 5 times greater than the existing cathode inks. After opening the twisted chains, the LiNi 0.6 Mn 0.2 Co 0.2 O 2 cathode ink exhibited a lower viscosity, a faster thixotropic recovery, and superior screen printability than the ink containing twisted chains. Furthermore, due to the improved internal architectural integrity of screen-printed electrodes printed by the excellent screen-printability of ink, the electrode printed with optimized inks displayed a 33% larger charge capacity at 6C with a mass loading of 6.5 mg/cm2 than that produced with chains-twisted ink. In addition, based on the fundamental of the two-step approach, we present optimization approaches for altering screen-printable inks for a variety of circumstances. This idea could promote the coupling of screen printing with the production of functional electrodes and could be utilized for the production of screen-printable inks for all fields.

Conductive Paintable 2D Layered MoS2 Inks

Waterborne Graphene- and Nanocellulose-Based Inks for Functional Conductive Films and 3D Structures

Solution-Processable PEDOT Particles for Coatings of Untreated 3D-Printed Thermoplastics

High-mobility patternable MoS2 percolating nanofilms

Rheological behavior of molybdenum disulfide (MoS2) inks under electric fields: influence of concentration and voltage

Spontaneous Photonic Jammed Packing of Core-Shell Colloids in Conductive Aqueous Inks for Non-Iridescent Structural Coloration

Biomass-Derived, Highly Conductive Aqueous Inks for Superior Electromagnetic Interference Shielding, Joule Heating, and Strain Sensing

A library of 2D electronic material inks synthesized by liquid-metal-assisted intercalation of crystal powders

Systematic investigation on the surfactant‐assisted liquid phase exfoliation of MoS2 and WS2 in water for sustainable 2D material inks

Flash Graphene and Poly(O-Methoxy Aniline) for the Composition of a Solvent-Based Conductive Ink

Highly Conductive Films by Rapid Photonic Annealing of Inkjet Printable Starch–Graphene Ink

Control of Charge Carriers and Band Structure in 2D Monolayer Molybdenum Disulfide via Covalent Functionalization.

Cathodic Deposition of Conductive MOF Films: Mechanism and Applications

Liquid Shear Exfoliation of MoS2: Preparation, Characterization, and NO2-Sensing Properties

Exfoliation of 2D materials by saponin in water: Aerogel adsorption / photodegradation organic dye

3D printing interface-modified PDMS/MXene nanocomposites for stretchable conductors

Scalable Fabrication of High-Performance Transparent Conductors Using Graphene Oxide-Stabilized Single-Walled Carbon Nanotube Inks

Inkjet-printed thin-film transistors using surfactant-based transition-metal dichalcogenide nanocomposites suspended in polymeric semiconductors

(Invited) Opening Twisted Molecular Chains of High Solid Content Screen Printable Ink for Screen-Printed Low-Tortuosity Electrodes

Direct Exfoliation Of Natural Sio2-Containing Molybdenite In Isopropanol: A Cost Efficient Solution For Large-Scale Production Of Mos2 Nanosheetes

Facile fabrication of MoS2 and MoSe2 layered structures on Mo foil for the efficient photocatalytic dye degradation and electrocatalytic hydrogen evolution reaction