Abstract:Heat exchangers are devices that typically transfer heat between two fluids. The performance of a heat exchanger such as heat transfer rate and pressure loss strongly depends on the flow regime in the heat transfer system. In this paper, we present a density-based topology optimization method for a two-fluid heat exchange system, which achieves a maximum heat transfer rate under fixed pressure loss. We propose a representation model accounting for three states, i.e., two fluids and a solid wall between the two fluids, by using a single design variable field. The key aspect of the proposed model is that mixing of the two fluids can be essentially prevented without any penalty scheme. This is because the solid constantly exists between the two fluids due to the use of the single design variable field. We demonstrate the effectiveness of the proposed approach through three-dimensional numerical examples in which an optimized design is compared with a simple reference design, and the effects of design conditions (i.e., Reynolds number, Prandtl number, design domain size, and flow arrangements) are investigated.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to design the topology of a two - fluid heat - exchange system to achieve the maximum heat - transfer rate under a fixed pressure loss. Specifically, the researchers proposed a density - based topology optimization method for designing a two - fluid heat - exchange system. The key of this method lies in using a single design variable field to represent the two fluids and the solid wall between them, thus effectively preventing the mixing of the two fluids without using any penalty scheme. Through three - dimensional numerical examples, the researchers demonstrated the effectiveness of the proposed method and explored the influence of different design conditions (such as Reynolds number, Prandtl number, design domain size and flow arrangement) on the optimized design. ### Core problems of the paper - **Objective**: Maximize the heat - transfer rate of the two - fluid heat - exchange system under the condition of fixed pressure loss. - **Method**: Proposed a density - based topology optimization method, using a single design variable field to represent the two fluids and the solid wall to avoid fluid mixing. - **Verification**: Through three - dimensional numerical simulation, verified the effectiveness of the proposed method and analyzed the influence of different design parameters on the optimization results. ### Key technical points 1. **Single design variable field**: Use a design variable field to represent the two fluids and the solid wall, simplifying the model and avoiding fluid mixing. 2. **Virtual body force**: Introduced different virtual body force terms, which act on the control equations of the two fluids respectively, to achieve the state represented by the design variable field. 3. **Interpolation function**: Defined the interpolation function of inverse permeability to ensure that the flow characteristics of the fluid meet the expectations under different design variable values. 4. **No - penalty scheme**: Through the smoothing treatment of the design variable field, avoided using the penalty function to prevent fluid mixing and improved the stability of the optimization process. ### Mathematical model - **Control equations**: - Continuity equation: \(\nabla \cdot \mathbf{u} = 0\) - Momentum equation: \(\rho (\mathbf{u} \cdot \nabla) \mathbf{u} = -\nabla p + \mu \nabla^2 \mathbf{u} + \mathbf{F}\) - Energy equation: \(\rho C_p (\mathbf{u} \cdot \nabla) T - k \nabla^2 T = 0\) - **Boundary conditions**: - Pressure and temperature conditions at the inlet and outlet. - No - slip condition and adiabatic condition on the solid wall. - **Optimization objective**: - Maximize the total heat - transfer rate \(Q\), defined as: \[ Q = \dot{m} C_p (T_{\text{in}} - T_{\text{out}}) \] - Dimensionless form of the objective function \(J\): \[ J = \int_{\Gamma_{\text{out},1}} (\mathbf{u} \cdot \mathbf{n})(1 - T) \, d\Gamma + \int_{\Gamma_{\text{out},2}} (\mathbf{u} \cdot \mathbf{n}) T \, d\Gamma \] ### Conclusion This research successfully designed the optimized structure of the two - fluid heat - exchange system through the proposed density - based topology optimization method. This method not only achieved the maximum heat - transfer rate under the condition of fixed pressure loss, but also effectively prevented fluid mixing through a single design variable field. The numerical simulation results show that the optimized design significantly improves the heat - transfer efficiency, especially under high Reynolds number and high Prandtl number conditions.

Topology design of two-fluid heat exchange

Topology optimization of two fluid heat exchangers

Three-dimensional topology optimization of heat exchangers with the level-set method

Topology Optimization of Turbulent Flow Cooling Structures Based on the k-ε Model

An approach for topology optimization of heat sinks for two-phase flow boiling: Part 1 – Model formulation and numerical implementation

Topology optimization of heat sink based on variable density method

Topology Optimization of Turbulent Forced Convective Heat Sinks Using a Multi-Layer Thermofluid Model

Topography optimisation using a reduced-dimensional model for transient conjugate heat transfer between fluid channels and solid plates with volumetric heat source

Three-dimensional topology optimization of thermal-fluid-structural problems for cooling system design

An isogeometric analysis-based topology optimization framework for 2D cross-flow heat exchangers with manufacturability constraints

Thermo-fluid dynamic design optimization of a concentric tube heat exchanger

Topology optimization of fluidic flows on 2-manifolds

Topology optimization of heat sinks for instantaneous chip cooling using a transient pseudo-3D thermofluid model

Topology Optimization Design of Micro-Channel Heat Sink by Considering the Coupling of Fluid-Solid and Heat Transfer

Topology optimization of surface flows

Research on topology optimization of liquid-cooled plates based on multi-level optimization

Concurrent optimization of the internal flow channel, inlets, and outlets in forced convection heat sinks

Multi-objective topology optimization of heat transfer surface using level-set method and adaptive mesh refinement in OpenFOAM

Fluidic Topology Optimization with an Anisotropic Mixture Model

Topology Optimization of Planar Cooling Channels Using a Three-Layer Thermofluid Model in Fully Developed Laminar Flow Problems

The Power Flow Topology of Heat Transfer Systems at Supercritical Conditions for Performance Analysis and Optimization