Abstract:This work successfully created a polypyrrole-polyethyleneimine (PPy-PEI) nano adsorbent for the elimination of the lead ion Pb2+ from an aqueous solution. An efficient conducting polymer-based adsorbent called as was created using ammonium persulfate (NH4)(2)S2O8 as an oxidant (PPy-PEI). The PEI hyper-branched polymer with terminal amino groups was added to the PPy adsorbent to offer heavy metals more effective chelating sites. Pb2+ removal from aqueous solution using polyethyleneimine micro adsorbent was successfully accomplished using a batch equilibrium technique (PPy-PEI). The generated water-insoluble polymer nanoadsorbent had enough nitrogen atoms; therefore, an effort was made to link PEI, a water-soluble PPy, with PPy, a conjugated polymer, for lead ion adsorption from an aqueous solution. The generated PPy-PEI nanoadsorbents were discovered to have average particle sizes of 18-34 nm and a Brunauer-Emmet-Teller surface area of 17 m(2)/g, respectively. The thermal behavior of the composites was investigated using thermo gravimetric and differential scanning calorimetric methods. The lead ion adsorption efficacy of pure polypyrrole was found to be 38%; however, a batch equilibrium technique employing nanoadsorbent revealed with the maximum adsorption capacity of 75.60 mg g(-1). At pH 10 and 30 min of contact time at 50 degrees C, 0.2 g of adsorption was shown to be the ideal dosage. X-ray diffraction analysis, energy-dispersive ray spectroscopy, and Fourier transform infrared ray spectrum support the lead ion adsorption by PPy-PEI nanoadsorbents. The cauli-like structure was visible using field emission scanning electron microscopy. Studying the thermodynamic showed that the adsorption was endothermic as illustrated from the positive value of value of Delta H degrees is 1.439 kJ/mol which indicates that the uptake of Pb2+ onto nanoadsorbent PPy-PEI could be attributed to a physical adsorption process. According to the values of Delta G degrees, the adsorption process was spontaneous at all selected temperatures. The positive value of Delta S degrees value (43.52 j/mol) suggested an increase in the randomness at the solid/solution interface during the adsorption process. The adsorption data meet the pseudo-second-order kinetic model and suited the Langumuir isothermal model effectively.

Application of periwinkle shell for the synthesis of calcium oxide nanoparticles and in the remediation of Pb2+-contaminated water

Development of novel heteroatoms enriched nanoporous material for rapid removal of Pb(II) ions from water bodies by batch adsorption and cross-flow membrane filtration method

Role of Purged Air in the Synthesis of the Mesoporous NiO/C Composite and Its Application in Wastewater Treatment

Effective Removal of Pb(II), Cr(VI), and Cd(II) Ions from Water Using Environmentally Friendly Cerium Oxide Nanoparticles Synthesized from Pods of Pisum sativum

Isotherm, Kinetics, Thermodynamics, Recyclability and Mechanism of Ultrasonic assisted Adsorption of Methylene Blue and Lead (II) ions using Green Synthesized Nickel Oxide Nanoparticles

Zinc oxide – mesoporous silica nanocomposite: preparation, characterisation and application in water treatment for lead, cadmium and chromium removal

Role of Purged Air On Synthesis of Mesoporous NiO/C Composite And Its Application On Waste Water Treatment

Magnesium oxide loaded mesoporous silica: Synthesis, characterisation and use in removing lead and cadmium from water supplies

Enhancement of Pb(II) adsorptive removal by incorporation of UiO-66-COOH into the magnetic graphitic carbon nitride nanosheets

Optimization and the kinetics of coag-flocculation using periwinkle shells for paint wastewater treatment

Biowaste-derived nanocomposite of calcium oxide incorporated in nickel oxide for efficient removal of organic pollutants

Biosynthesis of lead oxide nanoparticles using mulberry leaf extract for adsorptive removal of diazine black dye

Porous Adsorbent Based on Kaolin and Nanomagnetic Cobalt Ferrite for Effective Removal of Pb(II) from Wastewater

A novel approach for the modification of eggshell powder and its application for lead and methylene blue removal

A Facile Synthesis of RGO-Ag2MoO4 Nanocomposites for Efficient Lead Removal from Aqueous Solution

Silica@poly(chitosan- N -isopropylacrylamide-methacrylic acid) microgels: Extraction of palladium (II) ions and in situ formation of palladium nanoparticles for pollutant reduction

Polymer-Based Nano-Adsorbent for the Removal of Lead Ions: Kinetics Studies and Optimization by Response Surface Methodology

Nanoscale Zero-Valent Iron Dispersed by Sodium Alginate Enables Highly Efficient Removal of Lead (Pb) from Aqueous Solution

Biosynthesized MgO@SnO2 nanocomposite and their modification with polyvinylpyrrolidone. Efficiency for removal of heavy metals and contaminants from industrial petroleum wastewater

Melt processing of polypropylene-grafted-maleic anhydride/Chitosan polymer blend functionalized with montmorillonite for the removal of lead ions from aqueous solutions

A novel green synthesis of MnO2-Coal composite for rapid removal of silver and lead from wastewater