Abstract:The pulp and paper industry generates vast amounts of wastewater, and its character heavily depends on various factors (raw material, the undertaken process, the final product, etc.). The wastewater from this sector, which originates from several sources in each mill and are mostly combined, is polluting and hazardous. This paper presents a state-of-the-art review of the physical, chemical, biological, and advanced hybrid treatment techniques, concerning their effectiveness in removing specific pollutants, namely, chemical oxygen demand, lignin, color, and adsorbable organo-halogens. Throughout the manuscript, at the end of each section, a conclusive comparison has been presented and the proper method is introduced. Furthermore, numeric data regarding the effectiveness of each technique toward each pollutant are gathered from the literature and are available in the Supporting Information of the paper. Biological treatment processes using anaerobic–aerobic treatment mostly cure organic biodegradable contaminants (75–90% COD removal). Moreover, biological treatment using a consortium of microorganisms can potentially increase color removal efficiency (from 65 to 97%). Hybrid treatment is also among the candidates for color removal. To treat complex matters (lignin and AOX), physical and chemical treatments have shown promising performance, but they are generally expensive and impractical to treat huge amounts of wastewater. For the treatment of high molecular weight contaminants (lignin) advanced oxidation processes (AOPs), including ozonation and Fenton-based treatment, have shown great performance (90–99%); however, they are limited due to their maintenance and operation costs. To overcome these challenges, source separation of the wastewater streams in the pulp and paper industry is recommended. AOPs or membrane technologies or hybrid processes are suggested for the bleaching effluent (80% AOX removal), which is relatively low in amount, and a combination of conventional treatment processes would be preferred to treat wastewater streams that are more biodegradable. The biological performance can also be enhanced using granular activated carbon on the sequence. Finally, for treating black liquor, adsorption processes have proven to be the prime candidate.

Detoxification of Real Pulp and Paper Industry Wastewater via Sunlight-Assisted Dual Technology Employing Waste Driven Composite: A Parametric Optimization and Statistical Analysis

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

Synergistic degradation employing photocatalysis and photo-Fenton process of real industrial pharmaceutical effluent utilizing the Iron-Titanium dioxide composite

Removal of COD and Color from Textile Wastewater by the Fenton and UV/H2O2 Oxidation Processes and Optimization

Treatment of pulp and paper mill wastewater by solar photo-Fenton process

Photodegradation of Orange Ii Using Waste Paper Sludge-Derived Heterogeneous Catalyst in the Presence of Oxalate under Ultraviolet Light Emitting Diode Irradiation

Heterogeneous photocatalysis using TiO2 modified with hydrotalcite and iron oxide under UV-visible irradiation for color and toxicity reduction in secondary textile mill effluent

Advanced treatment process for papermaking wastewater by composite photoelectrocatalysis and heterogeneous photocatalysis of nano-TiO2 colloid and its pilot-scale system

Electrochemical Degradation of Pulp and Paper Mill Wastewater. Part 1. COD and Color Removal

Integrated Process Combined with Fenton Reaction for the Treatment of Papermaking Deinking Wastewater

Electrospun Fe doped TiO2 fiber photocatalyst for efficient wastewater treatment

Combination of Chemical Coagulation and Photo-Fenton Oxidation Process for the Treatment of Beet Sugar Industry Wastewater: Optimization of Process Conditions by Response Surface Methodology

Effectiveness of photocatalysis of Fe78Si9B13/TiO2 composites for acid orange 7 degradation

Recalcitrant pollutants removal from paper mill wastewater by ferrous ion- and heat- activated persulfate oxidation processes using response surface methodology: a comparison study

A Comprehensive Review on Pulp and Paper Industries Wastewater Treatment Advances

Pulp and Paper Mill Effluent Treated by Combining Coagulation-Flocculation-Sedimentation and Fenton Processes

Advanced oxidation process and biotreatment: Their roles in combined industrial wastewater treatment

Fenton oxidation for effective removal of color and organic matter from denim cotton wastewater without biological treatment

Green ternary composite of graphitic carbon nitride/TiO2/ polyorthoanisidine for the enhanced photocatalytic treatment of Direct Red 28 for industrial water treatment solutions

Carbene Ligand-Doped Fe2O3 Composite for Rapid Removal of Multiple Dyes under Sunlight

Pre-treatment of composite industrial wastewater by Fenton and electro-Fenton oxidation processes