Abstract:With the depletion of energy sources, people are gradually deepening the development of new energy sources. However, energy storage devices are limiting the pace of the development of new energy sources.[1] Considering the potential of supercapacitors as a supplement or alternative to rechargeable batteries for fast energy harvesting and high power transfer has become a research focus recently. Hybrid supercapacitors (HSCs) can bridge the gap between supercapacitors and batteries. It is well known that the main components of HSC devices are anode and cathode. The anode mainly provides high electrochemical performance, while the cathode can supply a wide potential window and good stability.[2] The energy density calculation equation (E = 0.5 CV 2 ) is known and deduced that can control the energy density of HSC by the operating voltage window (V) and specific capacitance (C). Obviously, constructing anode materials with high capacitance is one of the effective ways to achieve the high energy density of HSC. In addition, previous experimental results show that reasonable ion doping is beneficial to change the electronic structure of electrode materials and improving the energy storage performance of electrode materials.[3-5] One of the elements with more than one oxidation state can form two (or more) ions of different valence states under the action of a reducing agent, which will be called mixed-valence ions. Boosting the specific capacitance of the electrode, ions with mixed-valence states have higher charge storage capacity and more abundant redox reactions than most other transition metal ions. In this regard, vanadium has various stable oxidation states (+ 2, + 3, + 4, and + 5). In particular, its high oxidation states (+ 4 and + 5) can store charge in the positive potential range, thus providing a favorable pseudo-capacitance. Here, we chose Ni 3 S 2 with high theoretical capacitance and prepared vanadium-doped nickel sulfide (V-Ni 3 S 2 , denoted as VNS) anode electrodes using vanadium ions as dopant ions (Figure 1). Using nickel foam as the nickel source, prepared the VNS electrode by a one-step hydrothermal method. Since the electrode is grown in situ on the surface of nickel foam, the electrode material can be employed as an electrode sheet directly after preparation without further fabrication. Figure 1. Schematic diagram of synthesis process of VNS electrode, and Electrochemical storage performance: (a) CV curves of the VNS and NS electrodes at 2 mV s -1 scan rate, (b) GCD curves of the VNS and NS electrodes at 1 A g -1 , (c) GCD curves of VNS with different V doping amounts at 1 A g -1 , (d) The Ragone plots, (e) Self-discharge of NS//AC device and VNS//AC device for five hours, and (f) Cycle performance of the VNS//AC hybrid supercapacitor with a voltage of 1.6 V at a current density of 2 A g -1 . [6] The most direct effect of avoiding the use of binder and thus increasing the conductivity is that the specific capacitance of the prepared VNS electrodes is further enhanced (2072 F g − 1 at 1 A g − 1 ). In addition, the structure of the surface of the prepared VNS electrode material is nanoflower morphology. Integrating two-dimensional nanosheets into three-dimensional nanoflower morphologies increases the number of active sites while improving the structural stability (capacitance retention of 86.4% after 10,000 cycles, Figure 1a-f). Finally, using the VNS and activated carbon electrodes as anode and cathode to assemble the VNS//AC hybrid supercapacitors delivers an excellent energy density of 81.33 Wh kg − 1 at a power density of 160 W kg − 1 . This simple preparation method and significantly enhanced performance of the electrode materials have far-reaching potential for application in HSC devices. References [1] C. Li et al. MOF-derived NiZnCo-P nano-array for asymmetric supercapacitor, Chem. Eng. J. 446 (2022) 137108. [2] K. Tao et al. Epitaxial grown self-supporting NiSe/Ni 3 S 2 /Ni 12 P 5 vertical nanofiber arrays on Ni foam for high performance supercapacitor: Matched exposed facets and re-distribution of electron density, Nano Energy, 55 (2019) 65-81. [3] G. Li et al. One-pot synthesis of Cu-doped Ni 3 S 2 nano-sheet/rod nanoarray for high performance supercapacitors, Chem. Eng. J. 388 (2020) 124319. [4] Y. Ruan et al. Al-doped β-NiS Mesoporous Nanoflowers for Hybrid-type Electrodes toward Enhanced Electrochemical Performance, Electrochim. Acta, 236 (2017) 307-318. [5] Y. Cheng et al. A novel electrode for supercapacitors: Spicules-like Ni 3 S 2 shell grown on molyb -Abstract Truncated-

Mesoporous vanadium nitride as anion storage electrode for reverse dual-ion hybrid supercapacitor

Vanadium-doped Co0.85Se Nanowire Arrays with High Areal Capacitance for Hybrid Supercapacitor Electrodes

Smart confinement of MnO enabling highly reversible Mn(II)/Mn(III) redox for asymmetric supercapacitors

Hybridization of Porous Vanadium Nitride Nanosheets with Cobalt-Encapsulated Nitrogen-Doped Carbon Nanotubes on Carbon Cloth As an Advanced Monolithic Negative Electrode for Boosting Asymmetric Supercapacitors

MnOx nanosheets anchored on a bio-derived porous carbon framework for high-performance asymmetric supercapacitors

Double-Carbon Matrix-Supported MnO 2 for High-Voltage Supercapacitors in a Neutral Aqueous System

Vanadium Nitride-Vanadium Oxide-Carbon Nanofiber Hybrids for High Performance Supercapacitors

Enhanced ions and electrons transmission enables high-performance KxMnO@C cathode for hybrid supercapacitors

Anion storing, oxygen vacancy incorporated perovskite oxide composites for high-performance aqueous dual ion hybrid supercapacitors

In-Situ Synthesis of Heterostructured Carbon-Coated Co/MnO Nanowire Arrays for High-Performance Anodes in Asymmetric Supercapacitors

A Novel NASICON‐Typed Na 4 VMn 0.5 Fe 0.5 (PO 4 ) 3 Cathode for High‐Performance Na‐Ion Batteries

Ammonium Ion-Pre-Intercalated MnO2 on Carbon Cloth for High-Energy Density Asymmetric Supercapacitors

Interconnected two-dimensional MnO2 nanosheets anchored on three-dimensional porous Cu skeleton as a high-performance cathode for energy storage

MnO2 Nanoparticles Anchored on Carbon Nanotubes with Hybrid Supercapacitor-Battery Behavior for Ultrafast Lithium Storage

Self-standing manganese dioxide/graphene carbon nanotubes film electrode for symmetric supercapacitor with high energy density and superior long cycling stability

V2O3 Nanoparticles Confined in High-Conductivity and High-Throughput Carbon Nanofiber Nanohybrids for Advanced Sodium-Ion Capacitors.

A Hybrid of MnO2 Nanowires and MWCNTs As Cathode of Excellent Rate Capability for Supercapacitors

Fabrication of a vanadium nitride/N-doped carbon hollow nanosphere composite as an efficient electrode material for asymmetric supercapacitors

Vanadium Doped Nickel Sulfide@ Nickel Foam Electrode for Hybrid Supercapacitors

Dual-directional electronic modulation of manganese oxides enabled by heterostructures for efficient sodium ion storage

Heterostructures of Ni–Co–Al layered double hydroxide assembled on V4C3 MXene for high-energy hybrid supercapacitors